B008F 2017 Chevrolet Silverado Code - Rollover Protection Disable Switch
Quick Answer
The B008F diagnostic trouble code (DTC) on a 2017 Chevrolet Silverado refers to an issue with the Rollover Protection Disable Switch. Common causes include Faulty rollover protection disable switch, Wiring issues or electrical connection problems, Malfunctioning control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B008F 2017 Chevrolet Silverado indicates Rollover Protection Disable Switch.
- Common causes
- Common causes include Faulty rollover protection disable switch, Wiring issues or electrical connection problems, Malfunctioning control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B008F 2017 Chevrolet Silverado Description
The B008F diagnostic trouble code (DTC) on a 2017 Chevrolet Silverado refers to an issue with the Rollover Protection Disable Switch. This switch is a safety feature designed to prevent the deployment of the vehicle's airbags and seatbelt pretensioners in the event of a rollover accident. When this code is triggered, it means that there is a malfunction in the system that controls the disable switch, potentially compromising the vehicle's safety mechanisms.
Common Causes of B008F 2017 Chevrolet Silverado
- Faulty rollover protection disable switch.
- Wiring issues or electrical connection problems.
- Malfunctioning control module.
- Impact or damage to the vehicle that affects the rollover protection system.
- Software glitches or programming errors.
Symptoms of B008F 2017 Chevrolet Silverado
- Airbag warning light illuminated on the dashboard.
- Seatbelt warning light activated.
- Inability to disable the rollover protection system.
- Erratic behavior of airbag deployment during testing.
How to Fix B008F 2017 Chevrolet Silverado
- Begin by conducting a thorough inspection of the rollover protection disable switch and its wiring connections.
- Test the switch for proper functionality and replace it if necessary.
- Check the control module for any faults or errors and address them accordingly.
- Clear the DTC from the vehicle's system using a diagnostic scan tool.
- Perform a test drive to ensure that the issue has been resolved and that the airbags and seatbelt pretensioners deploy correctly in a controlled environment.
Cost to Fix B008F 2017 Chevrolet Silverado
The typical repair costs for addressing a B008F DTC related to the Rollover Protection Disable Switch on a 2017 Chevrolet Silverado can vary depending on the extent of the issue and the specific repairs needed. On average, the cost for parts and labor could range from $200 to $500. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate. Keep in mind that rates may be higher at dealerships or in metropolitan areas, while independent shops may offer more competitive pricing.
Tech Notes for B008F 2017 Chevrolet Silverado
B008F:05 Rollover Protection Disable Switch Circuit High Voltage/Open
Need more information about the B008F 2017 Chevrolet Silverado code?
Need more information on how to fix the B008F 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B008F 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B008F 2017 Chevrolet Silverado Code
1. What does OBDII code B008F for the Rollover Protection Disable Switch in a 2017 Chevrolet Silverado indicate?
- OBDII code B008F in a 2017 Chevrolet Silverado typically indicates a fault with the Rollover Protection Disable Switch.
2. What are the common symptoms of a Rollover Protection Disable Switch issue in a 2017 Chevrolet Silverado?
- Common symptoms of a Rollover Protection Disable Switch issue may include the airbag warning light staying on, a message indicating an airbag system fault, or the inability to engage the rollover protection feature.
3. What are some possible causes of the B008F OBDII code in a 2017 Chevrolet Silverado?
- Possible causes of the B008F OBDII code in a 2017 Chevrolet Silverado include a faulty rollover protection disable switch, wiring issues, or a malfunction in the airbag control module.
4. How can I diagnose a Rollover Protection Disable Switch problem in my 2017 Chevrolet Silverado?
- To diagnose a Rollover Protection Disable Switch problem, you can use an OBDII scanner to retrieve the specific trouble code, visually inspect the switch and surrounding wiring, and perform any necessary continuity or resistance tests.
5. Can I continue driving my 2017 Chevrolet Silverado with the B008F code related to the Rollover Protection Disable Switch?
- It is not recommended to continue driving your vehicle with the B008F code related to the Rollover Protection Disable Switch, as it may compromise the proper functioning of the airbag system in the event of a rollover.
6. How can I reset the B008F OBDII code related to the Rollover Protection Disable Switch in my 2017 Chevrolet Silverado?
- Resetting the B008F OBDII code typically involves fixing the underlying issue with the Rollover Protection Disable Switch and clearing the code with an OBDII scanner.
7. Is it possible to repair a Rollover Protection Disable Switch issue in a 2017 Chevrolet Silverado on my own?
- While some simple checks and repairs like checking the switch's connections can be done by DIY enthusiasts, it is recommended to have a professional mechanic diagnose and repair more complex issues related to the Rollover Protection Disable Switch.
8. How much does it typically cost to repair a Rollover Protection Disable Switch problem in a 2017 Chevrolet Silverado?
- The cost of repairing a Rollover Protection Disable Switch problem can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.
9. Can a faulty Rollover Protection Disable Switch impact the overall safety of my 2017 Chevrolet Silverado?
- Yes, a faulty Rollover Protection Disable Switch can impact the overall safety of your vehicle, particularly in the event of a rollover where the system may not deploy the necessary airbag protection.
10. How often should I have the Rollover Protection Disable Switch system in my 2017 Chevrolet Silverado inspected?
- It is a good practice to have the Rollover Protection Disable Switch system inspected during regular maintenance services or if you notice any warning lights or unusual behavior related to the airbag system.
Discuss the causes and fixes for B008F 2017 Chevrolet Silverado OBDII Code
Code B008F 2017 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.