Engine-CodesChevrolet – B008F 2016 Chevrolet Silverado

B008F 2016 Chevrolet Silverado Code - Rollover Protection Disable Switch

Quick Answer

The B008F diagnostic trouble code (DTC) on a 2016 Chevrolet Silverado indicates a problem with the Rollover Protection Disable Switch. Common causes include Faulty rollover protection disable switch, Wiring issues or electrical faults in the SRS system, Corrosion or damage to the connectors related to the disable switch. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B008F 2016 Chevrolet Silverado indicates Rollover Protection Disable Switch.
Common causes
Common causes include Faulty rollover protection disable switch, Wiring issues or electrical faults in the SRS system, Corrosion or damage to the connectors related to the disable switch.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 13, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B008F 2016 Chevrolet Silverado Description

The B008F diagnostic trouble code (DTC) on a 2016 Chevrolet Silverado indicates a problem with the Rollover Protection Disable Switch. This switch is a safety feature designed to prevent the deployment of the vehicle's airbags in the event of a rollover. When this code is triggered, it means that the system has detected a fault in the disable switch, which could potentially compromise the effectiveness of the vehicle's safety systems.

OBDII Code B008F 2016 Chevrolet Silverado - Rollover Protection Disable Switch
B008F 2016 Chevrolet Silverado Code - Rollover Protection Disable Switch

Common Causes of B008F 2016 Chevrolet Silverado

  1. Faulty rollover protection disable switch.
  2. Wiring issues or electrical faults in the SRS system.
  3. Corrosion or damage to the connectors related to the disable switch.
  4. Impact or physical damage to the vehicle that affects the disable switch.
  5. Software glitches or malfunctions in the SRS control module.

Symptoms of B008F 2016 Chevrolet Silverado

  1. Airbag warning light illuminated on the dashboard.
  2. Inability to disable the rollover protection system.
  3. Fault codes related to the SRS system stored in the vehicle's computer.
  4. Inconsistent or erratic behavior of the airbag system.

How to Fix B008F 2016 Chevrolet Silverado

  1. Begin by conducting a thorough diagnostic scan of the vehicle's SRS system to confirm the presence of the B008F code and identify any additional related fault codes.
  2. Inspect the rollover protection disable switch and its wiring for any visible damage, corrosion, or loose connections. Replace or repair any faulty components as necessary.
  3. Test the functionality of the disable switch using a multimeter to ensure proper operation.
  4. Clear the fault codes from the vehicle's computer and perform a test drive to verify that the issue has been resolved.
  5. If the problem persists, further troubleshooting may be required, such as checking the SRS control module or consulting the vehicle's service manual for specific diagnostic procedures.

Cost to Fix B008F 2016 Chevrolet Silverado

The cost of repairing a Rollover Protection Disable Switch issue can vary depending on the extent of the damage and the specific components that need to be replaced. In general, the cost of parts for this repair can range from $100 to $300, with labor costs adding an additional $100 to $200. Overall, the total repair cost for addressing a B008F code on a 2016 Chevrolet Silverado could be in the range of $200 to $500. However, it is important to note that these are rough estimates, and actual costs may vary based on factors such as location, labor rates, and the availability of parts. It is recommended to consult with a qualified mechanic or dealership for a more accurate cost estimate based on the specific circumstances of the vehicle.

Tech Notes for B008F 2016 Chevrolet Silverado

B008F:02 Rollover Protection Disable Switch Circuit Short to Ground

B008F:05 Rollover Protection Disable Switch Circuit High Voltage/Open

Need more information about the B008F 2016 Chevrolet Silverado code?

Need more information on how to fix the B008F 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B008F 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B008F 2016 Chevrolet Silverado Code

1. What does the OBDII code B008F in a 2016 Chevrolet Silverado indicate?

The code B008F indicates a fault with the Rollover Protection Disable Switch in the Chevrolet Silverado.

2. What are common symptoms of a Rollover Protection Disable Switch issue in a 2016 Silverado?

Common symptoms include the airbag warning light staying illuminated on the dashboard and a message indicating an issue with the rollover protection system.

3. What can cause the Rollover Protection Disable Switch to trigger the B008F code in a 2016 Silverado?

The code B008F can be triggered by a malfunction in the rollover protection system, a faulty disable switch, or damaged wiring connections.

4. How can I diagnose the Rollover Protection Disable Switch issue triggering the B008F code in my 2016 Silverado?

Diagnosis involves using an OBDII scanner to retrieve the specific B008F code, inspecting the disable switch and wiring for damage, and checking for any loose connections.

5. Can I continue driving my 2016 Chevrolet Silverado with the B008F code related to the Rollover Protection Disable Switch?

It is not recommended to drive the vehicle with the B008F code active, as it indicates a potential safety issue with the rollover protection system.

6. How can I repair the Rollover Protection Disable Switch problem causing the B008F code in my 2016 Silverado?

Repair options include replacing the faulty disable switch, repairing damaged wiring connections, or addressing any underlying issues with the rollover protection system.

7. Are there any recalls or service bulletins related to the Rollover Protection Disable Switch issue in the 2016 Chevrolet Silverado?

Check with a Chevrolet dealership or visit the NHTSA website to see if there are any recalls or service bulletins related to the B008F code in your specific Silverado model.

8. Can a DIY enthusiast fix the Rollover Protection Disable Switch issue triggering the B008F code in a 2016 Silverado?

While some basic diagnosis and repairs can be done by DIY enthusiasts, addressing the Rollover Protection Disable Switch issue may require specialized tools and expertise.

9. Is it necessary to reset the OBDII system after repairing the Rollover Protection Disable Switch issue in a 2016 Silverado?

Yes, it is recommended to reset the OBDII system after repairing the issue to clear the B008F code and ensure proper functioning of the vehicle's diagnostic system.

10. How can I prevent future occurrences of the B008F code related to the Rollover Protection Disable Switch in my 2016 Chevrolet Silverado?

Regularly inspecting the rollover protection system, disable switch, and wiring for any signs of damage or wear can help prevent future occurrences of the B008F code.

Discuss the causes and fixes for B008F 2016 Chevrolet Silverado OBDII Code

Code B008F 2016 Chevrolet Silverado comments

No comments found for this page.