B0088 2018 GMC Sierra Code - Right Rear Side Impact Sensor
Quick Answer
The B0088 diagnostic trouble code (DTC) for the 2018 GMC Sierra refers to an issue with the right rear side impact sensor. Common causes include Sensor malfunction due to electrical issues or wiring damage, Physical damage to the sensor from a prior collision or impact, Corrosion or water damage affecting the sensor's functionality. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0088 2018 GMC Sierra indicates Right Rear Side Impact Sensor.
- Common causes
- Common causes include Sensor malfunction due to electrical issues or wiring damage, Physical damage to the sensor from a prior collision or impact, Corrosion or water damage affecting the sensor's functionality.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0088 2018 GMC Sierra Description
The B0088 diagnostic trouble code (DTC) for the 2018 GMC Sierra refers to an issue with the right rear side impact sensor. This sensor is a crucial component of the vehicle's safety system, designed to detect impacts on the right side of the vehicle and trigger the deployment of the side airbags in the event of a collision. When this sensor malfunctions or fails to communicate with the vehicle's computer system properly, it can lead to serious safety concerns.
Common Causes of B0088 2018 GMC Sierra
- Sensor malfunction due to electrical issues or wiring damage.
- Physical damage to the sensor from a prior collision or impact.
- Corrosion or water damage affecting the sensor's functionality.
- Faulty airbag control module communication with the sensor.
- Software issues causing incorrect sensor readings.
Symptoms of B0088 2018 GMC Sierra
- Airbag warning light illuminated on the dashboard.
- Side airbags not deploying in a side impact collision.
- Abnormal or inconsistent airbag deployment.
- Issues with other safety systems, such as the seatbelt pretensioners.
- Diagnostic trouble code B0088 stored in the vehicle's computer system.
How to Fix B0088 2018 GMC Sierra
- Begin by diagnosing the specific cause of the issue using a scan tool to retrieve the DTC and inspect the sensor's wiring and connections.
- Replace the right rear side impact sensor if it is found to be faulty or damaged. Ensure proper installation and calibration of the new sensor.
- Check the airbag control module for any communication issues with the sensor and address any faults or errors.
- Test the vehicle to ensure that the sensor is functioning correctly and that the airbag system is operating as intended.
- Clear the DTC from the vehicle's computer system to reset the airbag warning light and verify that the repair was successful.
Cost to Fix B0088 2018 GMC Sierra
The cost of repairing a right rear side impact sensor on a 2018 GMC Sierra can vary depending on the specific cause of the issue and the cost of parts and labor. In general, the replacement sensor itself can range from $100 to $300, while the total repair cost including labor can be anywhere from $200 to $500. It's important to note that diagnostic time and labor rates at auto repair shops can vary, so it's recommended to obtain quotes from local shops for a more accurate estimate. Additionally, rates may be higher at dealerships or in metropolitan areas, while independent shops may offer lower prices for the repair.
Tech Notes for B0088 2018 GMC Sierra
B0088:05 Right Rear Side Impact Sensor High Voltage/Open
B0088:39 Right Rear Side Impact Sensor Internal Malfunction
B0088:3A Right Rear Side Impact Sensor Incorrect Component Installed
B0088:71 Right Rear Side Impact Sensor Invalid Data
Need more information about the B0088 2018 GMC Sierra code?
Need more information on how to fix the B0088 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0088 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0088 2018 GMC Sierra Code
1. What does OBDII code B0088 for a 2018 GMC Sierra indicate?
- OBDII code B0088 for a 2018 GMC Sierra refers to a problem with the Right Rear Side Impact Sensor.
2. What are common symptoms of a faulty Right Rear Side Impact Sensor in a 2018 GMC Sierra?
- Common symptoms include the airbag warning light staying illuminated and potential issues with the airbag system deployment.
3. What are possible causes of OBDII code B0088 in a 2018 GMC Sierra?
- Possible causes include a malfunction in the Right Rear Side Impact Sensor itself, wiring issues, or a problem with the airbag control module.
4. How can I diagnose the Right Rear Side Impact Sensor in my 2018 GMC Sierra?
- Diagnosis typically involves using an OBDII scanner to retrieve the specific trouble code, visually inspecting the sensor and its wiring, and performing electrical tests as needed.
5. Can I still drive my 2018 GMC Sierra with OBDII code B0088?
- It is not recommended to drive the vehicle with this code present, as it may affect the proper functioning of the airbag system in the event of a collision.
6. Is it safe to repair the Right Rear Side Impact Sensor in a 2018 GMC Sierra myself?
- Due to the critical nature of the airbag system, it is recommended to have a qualified technician diagnose and repair the sensor to ensure proper functionality and safety.
7. How much does it cost to repair the Right Rear Side Impact Sensor in a 2018 GMC Sierra?
- The cost of repair can vary depending on the exact cause of the issue, but it may involve replacing the sensor, addressing wiring problems, or resetting the airbag system, with costs ranging from a few hundred to over a thousand dollars.
8. Can a faulty Right Rear Side Impact Sensor affect other systems in my 2018 GMC Sierra?
- A faulty sensor can potentially affect the overall airbag system's performance, which is designed to protect occupants in the event of a side impact collision.
9. Are there any recalls or technical service bulletins related to OBDII code B0088 for the 2018 GMC Sierra?
- It is advisable to check with a GMC dealership or the National Highway Traffic Safety Administration (NHTSA) to see if there are any relevant recalls or service bulletins for this specific issue.
10. How can I prevent issues with the Right Rear Side Impact Sensor in my 2018 GMC Sierra?
- Regular maintenance and inspections of the airbag system, as well as addressing any warning lights promptly, can help prevent issues with the Right Rear Side Impact Sensor and ensure the safety of the vehicle's occupants.
Discuss the causes and fixes for B0088 2018 GMC Sierra OBDII Code
Code B0088 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.