B0088 2017 Chevrolet Silverado Code - Right Rear Side Impact Sensor
Quick Answer
The B0088 diagnostic trouble code (DTC) on a 2017 Chevrolet Silverado indicates a problem with the right rear side impact sensor. Common causes include Impact damage: The sensor may be damaged in a collision, causing it to malfunction or fail, Wiring issues: Corrosion, breaks, or short circuits in the wiring connected to the sensor can disrupt communication and trigger the code, Sensor calibration error: If the sensor is incorrectly calibrated or out of alignment, it may not accurately detect impacts. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0088 2017 Chevrolet Silverado indicates Right Rear Side Impact Sensor.
- Common causes
- Common causes include Impact damage: The sensor may be damaged in a collision, causing it to malfunction or fail, Wiring issues: Corrosion, breaks, or short circuits in the wiring connected to the sensor can disrupt communication and trigger the code, Sensor calibration error: If the sensor is incorrectly calibrated or out of alignment, it may not accurately detect impacts.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0088 2017 Chevrolet Silverado Description
The B0088 diagnostic trouble code (DTC) on a 2017 Chevrolet Silverado indicates a problem with the right rear side impact sensor. This sensor is a crucial component of the vehicle's safety system, designed to detect impacts on the right rear side of the vehicle and deploy the appropriate safety measures, such as airbag deployment. When this sensor malfunctions or fails to communicate properly with the vehicle's computer system, it can compromise the effectiveness of the vehicle's safety features in the event of a side impact collision.
Common Causes of B0088 2017 Chevrolet Silverado
- Impact damage: The sensor may be damaged in a collision, causing it to malfunction or fail.
- Wiring issues: Corrosion, breaks, or short circuits in the wiring connected to the sensor can disrupt communication and trigger the code.
- Sensor calibration error: If the sensor is incorrectly calibrated or out of alignment, it may not accurately detect impacts.
- Sensor failure: Over time, the sensor may simply wear out or fail due to internal component issues.
- Software issues: Problems with the vehicle's computer system or software can also lead to the code being triggered.
Symptoms of B0088 2017 Chevrolet Silverado
- Airbag warning light: One of the most common symptoms associated with a faulty side impact sensor is the illumination of the airbag warning light on the vehicle's dashboard.
- Inconsistent airbag deployment: If the sensor is not functioning correctly, it may lead to inconsistent or delayed deployment of the airbags in a collision.
- False alarms: A malfunctioning sensor may also trigger false alarms, causing the airbags to deploy unnecessarily or fail to deploy when needed.
- Loss of safety features: A faulty side impact sensor can result in the loss of critical safety features, such as seatbelt pre-tensioners and side curtain airbags.
How to Fix B0088 2017 Chevrolet Silverado
- Diagnose the issue: Use a diagnostic tool to read the code and determine the exact cause of the problem.
- Inspect the sensor: Check the sensor for physical damage and ensure it is properly connected.
- Test the wiring: Inspect the wiring connected to the sensor for any signs of damage or corrosion.
- Replace the sensor: If the sensor is faulty, it will need to be replaced with a new one.
- Clear the code: Once the repair is complete, clear the code from the vehicle's computer system to reset the airbag system.
Cost to Fix B0088 2017 Chevrolet Silverado
The cost of repairing a right rear side impact sensor on a 2017 Chevrolet Silverado can vary depending on the specific cause of the issue. In general, the cost of a new sensor can range from $100 to $300, with additional costs for labor and diagnostic fees. The total repair cost, including parts and labor, can range from $200 to $600 or more. It's important to note that labor rates at auto repair shops can vary, so it's recommended to obtain a detailed estimate from a qualified technician before proceeding with the repair.
Tech Notes for B0088 2017 Chevrolet Silverado
B0088:05 Right Rear Side Impact Sensor High Voltage/Open
B0088:39 Right Rear Side Impact Sensor Internal Malfunction
B0088:3A Right Rear Side Impact Sensor Incorrect Component Installed
B0088:71 Right Rear Side Impact Sensor Invalid Data
Need more information about the B0088 2017 Chevrolet Silverado code?
Need more information on how to fix the B0088 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0088 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0088 2017 Chevrolet Silverado Code
1. What does OBDII code B0088 mean for a 2017 Chevrolet Silverado?
The code B0088 indicates a problem with the Right Rear Side Impact Sensor on a 2017 Chevrolet Silverado.
2. What are the common symptoms of a faulty Right Rear Side Impact Sensor on a 2017 Chevrolet Silverado?
Common symptoms include the airbag warning light staying on, the airbags not deploying in a collision, and diagnostic trouble codes related to the sensor.
3. What are possible causes of OBDII code B0088 on a 2017 Chevrolet Silverado?
Potential causes include a malfunctioning Right Rear Side Impact Sensor, damaged wiring or connectors, or a problem with the airbag control module.
4. How can I diagnose the issue related to OBDII code B0088 on my 2017 Chevrolet Silverado?
Diagnosis typically involves using a scan tool to retrieve the specific trouble code, inspecting the sensor and its wiring for damage, and testing the sensor's functionality.
5. Can I drive my 2017 Chevrolet Silverado with OBDII code B0088?
It's not recommended to drive with a faulty Right Rear Side Impact Sensor, as it can affect the proper deployment of airbags in the event of a side impact collision.
6. Is it possible to reset OBDII code B0088 on a 2017 Chevrolet Silverado without fixing the underlying issue?
Resetting the code without addressing the root cause will likely result in the code reappearing once the system detects the ongoing problem.
7. How much does it cost to repair OBDII code B0088 on a 2017 Chevrolet Silverado?
The cost of repair can vary depending on the specific issue, but it may involve replacing the Right Rear Side Impact Sensor, repairing damaged wiring, or addressing problems with the airbag control module.
8. Can I fix OBDII code B0088 on my 2017 Chevrolet Silverado myself?
While some may attempt to diagnose and repair the issue themselves, it's recommended to consult a professional technician due to the safety implications of airbag system repairs.
9. Are there any recalls or technical service bulletins related to OBDII code B0088 on a 2017 Chevrolet Silverado?
It's advisable to check with a Chevrolet dealership or online resources for any recalls or technical service bulletins that may address issues related to the Right Rear Side Impact Sensor.
10. How important is it to address OBDII code B0088 promptly on a 2017 Chevrolet Silverado?
Prompt attention to this code is crucial for ensuring the proper functioning of the airbag system and maintaining the safety of occupants in the event of a side impact collision.
Discuss the causes and fixes for B0088 2017 Chevrolet Silverado OBDII Code
Code B0088 2017 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.