B0088 2016 Chevrolet Silverado Code - Right Rear Side Impact Sensor
Quick Answer
The B0088 diagnostic trouble code (DTC) for a 2016 Chevrolet Silverado refers to an issue with the Right Rear Side Impact Sensor. Common causes include Impact or damage to the Right Rear Side Impact Sensor due to a collision, Corrosion or water damage affecting the sensor, Wiring or connection issues related to the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0088 2016 Chevrolet Silverado indicates Right Rear Side Impact Sensor.
- Common causes
- Common causes include Impact or damage to the Right Rear Side Impact Sensor due to a collision, Corrosion or water damage affecting the sensor, Wiring or connection issues related to the sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0088 2016 Chevrolet Silverado Description
The B0088 diagnostic trouble code (DTC) for a 2016 Chevrolet Silverado refers to an issue with the Right Rear Side Impact Sensor. This sensor is a crucial component of the vehicle's supplemental restraint system (SRS), also known as the airbag system. The side impact sensor is responsible for detecting a side collision and triggering the deployment of the side curtain airbags to protect the occupants in the event of a crash.
Common Causes of B0088 2016 Chevrolet Silverado
- Impact or damage to the Right Rear Side Impact Sensor due to a collision.
- Corrosion or water damage affecting the sensor.
- Wiring or connection issues related to the sensor.
- Faulty sensor component.
- Electronic control module (ECM) communication issues.
Symptoms of B0088 2016 Chevrolet Silverado
- Airbag warning light illuminated on the dashboard.
- Inaccurate or erratic airbag deployment.
- Side curtain airbags not deploying in a side impact collision.
- Diagnostic trouble code B0088 stored in the vehicle's computer system.
How to Fix B0088 2016 Chevrolet Silverado
- Begin by diagnosing the specific cause of the B0088 code using a scan tool to retrieve the fault codes and pinpoint the issue.
- Inspect the Right Rear Side Impact Sensor for any physical damage, corrosion, or water intrusion. Replace the sensor if necessary.
- Check the wiring harness and connections associated with the sensor for any signs of damage or poor connections. Repair or replace as needed.
- Clear the DTC from the vehicle's computer system after completing the repairs.
- Perform a thorough test drive to ensure that the airbag system is functioning correctly and that the B0088 code does not reappear.
Cost to Fix B0088 2016 Chevrolet Silverado
The cost of repairing a Right Rear Side Impact Sensor issue can vary depending on the specific cause of the problem and the labor rates in your area. In general, the cost of replacing the sensor and addressing any wiring or connection issues can range from $200 to $500. It's important to factor in diagnostic time and labor rates, which can vary between $80 and $150 per hour at most auto repair shops. Be sure to consult with a professional technician to get an accurate estimate for your specific vehicle.
Tech Notes for B0088 2016 Chevrolet Silverado
B0088:05 Right Rear Side Impact Sensor High Voltage/Open
B0088:39 Right Rear Side Impact Sensor Internal Malfunction
B0088:3A Right Rear Side Impact Sensor Incorrect Component Installed
B0088:71 Right Rear Side Impact Sensor Invalid Data
Need more information about the B0088 2016 Chevrolet Silverado code?
Need more information on how to fix the B0088 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0088 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0088 2016 Chevrolet Silverado Code
1. What does OBDII code B0088 for a 2016 Chevrolet Silverado indicate?
- OBDII code B0088 in a 2016 Chevrolet Silverado refers to a fault in the Right Rear Side Impact Sensor circuit.
2. What are the common symptoms of a B0088 OBDII code in a 2016 Chevrolet Silverado?
- Common symptoms include the airbag warning light illuminated on the dashboard and potential issues with the airbag system deployment.
3. What are the possible causes of the B0088 OBDII code in a 2016 Chevrolet Silverado?
- The code B0088 can be triggered by a faulty Right Rear Side Impact Sensor, wiring issues, or a poor connection in the sensor circuit.
4. How can I diagnose the B0088 OBDII code in my 2016 Chevrolet Silverado?
- Diagnosing the B0088 code typically involves using a scan tool to retrieve the specific fault code, inspecting the sensor and its wiring for damage, and testing the sensor's functionality.
5. Can I still drive my 2016 Chevrolet Silverado with the B0088 OBDII code present?
- It is not recommended to drive the vehicle with the B0088 code active, as it may affect the proper functioning of the airbag system in the event of a side impact collision.
6. How can I repair the B0088 OBDII code in my 2016 Chevrolet Silverado?
- Repairing the B0088 code often involves replacing the Right Rear Side Impact Sensor, repairing any damaged wiring, and ensuring a secure connection in the sensor circuit.
7. Is it safe to reset the B0088 OBDII code in a 2016 Chevrolet Silverado without fixing the issue?
- It is not advisable to simply reset the code without addressing the underlying problem, as it can pose a safety risk in the event of a collision.
8. Can I replace the Right Rear Side Impact Sensor in my 2016 Chevrolet Silverado myself?
- While it is possible to replace the sensor yourself, it is recommended to have the repair done by a qualified technician to ensure proper installation and calibration.
9. How much does it typically cost to repair the B0088 OBDII code in a 2016 Chevrolet Silverado?
- The cost of repairing the B0088 code can vary depending on the extent of the damage and whether other components need to be replaced, but it generally ranges from $200 to $500.
10. Are there any recalls or service bulletins related to the B0088 OBDII code in a 2016 Chevrolet Silverado?
- It is advisable to check with a Chevrolet dealership or the manufacturer's website for any recalls or service bulletins related to the B0088 OBDII code to see if your vehicle may be eligible for free repairs.
Discuss the causes and fixes for B0088 2016 Chevrolet Silverado OBDII Code
Code B0088 2016 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.