B0088:39 Code - Right Rear Side Impact Sensor Internal Malfunction
Quick Answer
The B0088:39 code indicates that there is an internal malfunction in the right rear side impact sensor of the vehicle. Common causes include Electrical issues such as a short circuit or open circuit in the wiring connected to the right rear side impact sensor, Faulty sensor due to physical damage from a previous collision, Corrosion or water damage affecting the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0088:39 indicates Right Rear Side Impact Sensor Internal Malfunction.
- Common causes
- Common causes include Electrical issues such as a short circuit or open circuit in the wiring connected to the right rear side impact sensor, Faulty sensor due to physical damage from a previous collision, Corrosion or water damage affecting the sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0088:39 Description
The B0088:39 code indicates that there is an internal malfunction in the right rear side impact sensor of the vehicle. Side impact sensors are crucial components of a vehicle's safety system, as they help detect and measure the severity of a side impact collision. When this sensor malfunctions, it can affect the vehicle's ability to deploy side airbags and other safety features in the event of a side impact crash.
Common Causes of B0088:39
- Electrical issues such as a short circuit or open circuit in the wiring connected to the right rear side impact sensor.
- Faulty sensor due to physical damage from a previous collision.
- Corrosion or water damage affecting the sensor.
- Malfunctioning control module that communicates with the side impact sensor.
Symptoms of B0088:39
- Airbag warning light illuminated on the dashboard.
- Inconsistent or non-deployment of side airbags in a crash.
- False triggering of side airbags.
- Diagnostic trouble codes related to the right rear side impact sensor.
How to Fix B0088:39
- Begin by diagnosing the specific cause of the internal malfunction in the right rear side impact sensor using a diagnostic scanner.
- Inspect the wiring harness connected to the sensor for any signs of damage, corrosion, or loose connections. Repair or replace as necessary.
- Test the sensor itself to determine if it is faulty and needs to be replaced.
- If the sensor is deemed faulty, remove and replace it with a new one, ensuring it is properly calibrated and installed.
- Clear the diagnostic trouble codes, reset the system, and perform a test to ensure that the right rear side impact sensor is now functioning correctly.
Cost to Fix B0088:39
The cost of repairing a right rear side impact sensor internal malfunction can vary depending on the make and model of the vehicle, the location of the repair shop, and the specific parts needed for the repair. On average, the cost of replacing a side impact sensor can range from $200 to $500, including parts and labor. However, it is important to note that diagnostic time and labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150. It is advisable to obtain quotes from local repair shops for a more accurate estimate of the total repair cost.
Tech Notes for B0088:39
B0088:05 Right Rear Side Impact Sensor High Voltage/Open
B0088:39 Right Rear Side Impact Sensor Internal Malfunction
B0088:3A Right Rear Side Impact Sensor Incorrect Component Installed
B0088:71 Right Rear Side Impact Sensor Invalid Data
Need more information about the B0088:39 code?
Need more information on how to fix the B0088:39 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0088:39 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0088:39 Code
No Frequently Asked Questions about B0088:39 Code found.
Discuss the causes and fixes for B0088:39 OBDII Code
Code B0088:39 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.