B0087:39 Code - Left Rear Side Impact Sensor Internal Malfunction
Quick Answer
The B0087:39 code indicates a left rear side impact sensor internal malfunction. Common causes include Electrical issues such as wiring damage or short circuits, Faulty sensor components or internal circuitry, Corrosion or damage due to water intrusion or environmental factors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0087:39 indicates Left Rear Side Impact Sensor Internal Malfunction.
- Common causes
- Common causes include Electrical issues such as wiring damage or short circuits, Faulty sensor components or internal circuitry, Corrosion or damage due to water intrusion or environmental factors.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0087:39 Description
The B0087:39 code indicates a left rear side impact sensor internal malfunction. Side impact sensors are crucial components of a vehicle's safety system, as they are responsible for detecting impacts from the side of the vehicle and triggering the deployment of side airbags or other safety features to protect occupants in the event of a crash. When this sensor malfunctions, it can significantly impact the vehicle's ability to detect and respond to side impacts, compromising the safety of the vehicle and its occupants.
Common Causes of B0087:39
- Electrical issues such as wiring damage or short circuits
- Faulty sensor components or internal circuitry
- Corrosion or damage due to water intrusion or environmental factors
- Impact damage to the sensor from a previous collision
- Software or programming issues within the vehicle's control module
Symptoms of B0087:39
- Airbag warning light illuminates on the dashboard
- Side airbags do not deploy in a side impact collision
- Inaccurate or inconsistent airbag deployment
- Diagnostic trouble codes related to the side impact sensor system
- Vehicle may fail safety inspections due to malfunctioning safety systems
How to Fix B0087:39
- Diagnose the specific cause of the malfunction by scanning the vehicle's computer for fault codes and conducting a visual inspection of the left rear side impact sensor and its wiring.
- Replace the faulty left rear side impact sensor with a new OEM or aftermarket unit.
- Repair any damaged wiring or connections related to the sensor.
- Clear the diagnostic trouble codes from the vehicle's computer and perform a test drive to ensure the issue has been resolved.
- If necessary, recalibrate or reprogram the vehicle's control module to recognize the new sensor and ensure proper operation.
Cost to Fix B0087:39
The cost of repairing a left rear side impact sensor internal malfunction can vary depending on the make and model of the vehicle, the availability of parts, and the labor rates of the auto repair shop. On average, the cost of replacing a side impact sensor can range from $200 to $500, including parts and labor. Additional costs may apply if there are other related issues that need to be addressed during the repair process. It's recommended to obtain quotes from multiple auto repair shops to compare prices and ensure a fair estimate for the repair.
Tech Notes for B0087:39
B0087:05 Left Rear Side Impact Sensor High Voltage/Open
B0087:39 Left Rear Side Impact Sensor Internal Malfunction
B0087:3A Left Rear Side Impact Sensor Incorrect Component Installed
B0087:71 Left Rear Side Impact Sensor Invalid Data
Need more information about the B0087:39 code?
Need more information on how to fix the B0087:39 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0087:39 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0087:39 Code
1. What are the common symptoms of OBDII code B0087:39 (Left Rear Side Impact Sensor Internal Malfunction)?
- Common symptoms include the airbag warning light illuminated on the dashboard and potential issues with the airbag system's functionality.
2. What can cause the OBDII code B0087:39 to trigger?
- The code can be triggered by a malfunction in the left rear side impact sensor, which may be caused by wiring issues, sensor damage, or internal component failure.
3. How can I diagnose the cause of OBDII code B0087:39?
- Diagnosis typically involves using a scan tool to retrieve the specific trouble code, inspecting the left rear side impact sensor and its wiring for damage, and conducting any necessary electrical tests.
4. Can I drive my vehicle with the OBDII code B0087:39 present?
- It is not recommended to drive the vehicle with the code present, as it indicates a potential issue with the airbag system's ability to deploy in the event of a side impact.
5. How can I repair OBDII code B0087:39 (Left Rear Side Impact Sensor Internal Malfunction)?
- Repairing the code may involve replacing the left rear side impact sensor, repairing any damaged wiring, or addressing any internal component failures identified during diagnosis.
6. Is it safe to reset the OBDII code B0087:39 without addressing the underlying issue?
- Resetting the code without addressing the underlying issue can lead to safety risks, as the airbag system may not function properly in the event of a side impact.
7. How much does it typically cost to repair OBDII code B0087:39?
- The cost of repairing the code can vary depending on the specific cause of the issue, but it may involve parts and labor expenses ranging from $200 to $500 or more.
8. Can a DIY enthusiast fix OBDII code B0087:39 at home?
- While some DIY enthusiasts may be able to diagnose and repair the issue, it is recommended to consult a professional mechanic, especially when dealing with safety-critical components like the airbag system.
9. What are the potential risks of ignoring OBDII code B0087:39?
- Ignoring the code can pose a risk of the airbag system failing to deploy correctly in a side impact collision, potentially leading to increased injury to vehicle occupants.
10. How long does it typically take to repair OBDII code B0087:39?
- The repair time can vary depending on the extent of the issue and the availability of parts, but it may take a few hours to a full day for a mechanic to diagnose and repair the problem.
Discuss the causes and fixes for B0087:39 OBDII Code
Code B0087:39 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.