B0086 2017 Chevrolet Silverado Code - Right Front Side Impact Sensor
Quick Answer
The B0086 code on a 2017 Chevrolet Silverado indicates a problem with the right front side impact sensor. Common causes include Sensor wiring or connector damage, Sensor impact damage from a previous collision, Corrosion or water damage to the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0086 2017 Chevrolet Silverado indicates Right Front Side Impact Sensor.
- Common causes
- Common causes include Sensor wiring or connector damage, Sensor impact damage from a previous collision, Corrosion or water damage to the sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0086 2017 Chevrolet Silverado Description
The B0086 code on a 2017 Chevrolet Silverado indicates a problem with the right front side impact sensor. This sensor is a crucial component of the vehicle's safety system, designed to detect impacts on the right front side of the vehicle and deploy the airbags accordingly. When this sensor malfunctions, it can compromise the effectiveness of the airbag system in the event of a collision, putting the occupants at risk.
Common Causes of B0086 2017 Chevrolet Silverado
- Sensor wiring or connector damage
- Sensor impact damage from a previous collision
- Corrosion or water damage to the sensor
- Faulty sensor internal components
Symptoms of B0086 2017 Chevrolet Silverado
- Airbag warning light illuminated on the dashboard
- Airbags not deploying in a collision
- False airbag deployment
- Vehicle not passing a safety inspection
How to Fix B0086 2017 Chevrolet Silverado
- Begin by disconnecting the vehicle's battery to prevent any accidental airbag deployment.
- Locate the right front side impact sensor, typically found in the front bumper area.
- Inspect the sensor wiring and connector for any damage or corrosion. Repair or replace as necessary.
- Check the sensor for any physical damage from a previous collision. Replace the sensor if damaged.
- Clear the diagnostic trouble codes from the vehicle's system using a diagnostic scanner.
Cost to Fix B0086 2017 Chevrolet Silverado
The cost of repairing a right front side impact sensor can vary depending on the extent of the damage and the specific parts needed for the repair. On average, the cost of replacing a side impact sensor can range from $200 to $500, including parts and labor. However, it's important to note that labor rates at auto repair shops can vary, so it's recommended to check with local shops for a more accurate estimate.
Tech Notes for B0086 2017 Chevrolet Silverado
B0086:05 Right Front Side Impact Sensor High Voltage/Open
B0086:0F Right Front Side Impact Sensor Signal Erratic
B0086:39 Right Front Side Impact Sensor Internal Malfunction
B0086:3A Right Front Side Impact Sensor Incorrect Component Installed
B0086:71 Right Front Side Impact Sensor Invalid Data
Need more information about the B0086 2017 Chevrolet Silverado code?
Need more information on how to fix the B0086 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0086 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0086 2017 Chevrolet Silverado Code
1. What does OBDII code B0086 mean for a 2017 Chevrolet Silverado?
- OBDII code B0086 indicates a problem with the Right Front Side Impact Sensor in a 2017 Chevrolet Silverado.
2. What are the common symptoms of a faulty Right Front Side Impact Sensor?
- Common symptoms of a faulty Right Front Side Impact Sensor include the airbag warning light illuminating on the dashboard and potential issues with the airbag system deployment.
3. What are the possible causes of OBDII code B0086 in a 2017 Chevrolet Silverado?
- The OBDII code B0086 in a 2017 Chevrolet Silverado is often caused by a malfunction or damage to the Right Front Side Impact Sensor itself, wiring issues, or a faulty connection.
4. How can I diagnose a problem with the Right Front Side Impact Sensor in my 2017 Chevrolet Silverado?
- Diagnosing an issue with the Right Front Side Impact Sensor may require using an OBDII scanner to retrieve the specific trouble code, visually inspecting the sensor and related wiring, and performing electrical tests as needed.
5. Can I drive my 2017 Chevrolet Silverado with OBDII code B0086?
- It is not recommended to drive your 2017 Chevrolet Silverado with OBDII code B0086, as this may affect the proper functioning of the airbag system in the event of a collision.
6. How can I repair a Right Front Side Impact Sensor issue in my 2017 Chevrolet Silverado?
- Repairing a Right Front Side Impact Sensor issue may involve replacing the sensor itself, repairing damaged wiring, ensuring proper connections, and clearing the trouble code with an OBDII scanner.
7. Is it necessary to reset the airbag system after fixing OBDII code B0086 in a 2017 Chevrolet Silverado?
- Yes, it is important to reset the airbag system after fixing OBDII code B0086 in a 2017 Chevrolet Silverado to ensure proper functionality and clear any stored error codes.
8. How much does it cost to replace a Right Front Side Impact Sensor in a 2017 Chevrolet Silverado?
- The cost of replacing a Right Front Side Impact Sensor in a 2017 Chevrolet Silverado can vary depending on the specific sensor model, labor costs, and whether it is being replaced at a dealership or an independent repair shop.
9. Can a DIY enthusiast replace the Right Front Side Impact Sensor in a 2017 Chevrolet Silverado?
- While it is possible for a DIY enthusiast to replace the Right Front Side Impact Sensor in a 2017 Chevrolet Silverado, it is recommended to have the necessary tools, technical knowledge, and safety precautions in place before attempting this repair.
10. How long does it take to repair a Right Front Side Impact Sensor issue in a 2017 Chevrolet Silverado?
- The time it takes to repair a Right Front Side Impact Sensor issue in a 2017 Chevrolet Silverado can vary depending on the extent of the problem, availability of parts, and the expertise of the mechanic, but it typically takes a few hours to complete the repair.
Discuss the causes and fixes for B0086 2017 Chevrolet Silverado OBDII Code
Code B0086 2017 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.