B0086 2014 Chevrolet Silverado Code - Right Front Side Impact Sensor
Quick Answer
The B0086 code on a 2014 Chevrolet Silverado indicates a problem with the right front side impact sensor. Common causes include Wiring or connector issues, such as corrosion or damage, Impact or physical damage to the right front side impact sensor, Faulty sensor internal components. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0086 2014 Chevrolet Silverado indicates Right Front Side Impact Sensor.
- Common causes
- Common causes include Wiring or connector issues, such as corrosion or damage, Impact or physical damage to the right front side impact sensor, Faulty sensor internal components.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0086 2014 Chevrolet Silverado Description
The B0086 code on a 2014 Chevrolet Silverado indicates a problem with the right front side impact sensor. This sensor plays a crucial role in the vehicle's safety system by detecting impacts on the right side of the vehicle and triggering the deployment of airbags in the event of a collision. When this sensor fails or malfunctions, it can compromise the effectiveness of the airbag system, potentially putting occupants at risk in the event of an accident.
Common Causes of B0086 2014 Chevrolet Silverado
- Wiring or connector issues, such as corrosion or damage
- Impact or physical damage to the right front side impact sensor
- Faulty sensor internal components
- Electronic control module (ECM) communication problems
- Previous collision or repair work affecting the sensor
Symptoms of B0086 2014 Chevrolet Silverado
- Airbag warning light illuminated on the dashboard
- Inability of the airbags to deploy in a collision
- Erratic airbag deployment in non-collision situations
- Diagnostic trouble code (DTC) B0086 stored in the vehicle's computer system
How to Fix B0086 2014 Chevrolet Silverado
- Begin by performing a thorough visual inspection of the right front side impact sensor, wiring, and connectors for any signs of damage or corrosion.
- Use a diagnostic scanner to retrieve the trouble code B0086 and verify the exact cause of the issue.
- Test the sensor's functionality by checking its resistance and output signal using a multimeter or oscilloscope.
- If the sensor is determined to be faulty, replace it with a new OEM (original equipment manufacturer) sensor and ensure proper installation.
- Clear the trouble code from the vehicle's computer system and perform a test drive to confirm that the issue has been resolved.
Cost to Fix B0086 2014 Chevrolet Silverado
The cost of repairing a B0086 code related to the right front side impact sensor on a 2014 Chevrolet Silverado can vary depending on the specific cause of the issue and the labor rates in your area. On average, you can expect to pay between $200 and $500 for parts and labor. However, it's essential to note that diagnostic time and labor rates at auto repair shops can fluctuate, so it's advisable to obtain quotes from multiple service providers to ensure a competitive price. Additionally, factors such as location, vehicle make and model, and engine type can influence the final repair costs.
Tech Notes for B0086 2014 Chevrolet Silverado
B0086:05 Right Front Side Impact Sensor High Voltage/Open
B0086:0F Right Front Side Impact Sensor Signal Erratic
B0086:39 Right Front Side Impact Sensor Internal Malfunction
B0086:3A Right Front Side Impact Sensor Incorrect Component Installed
B0086:71 Right Front Side Impact Sensor Invalid Data
Need more information about the B0086 2014 Chevrolet Silverado code?
Need more information on how to fix the B0086 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0086 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0086 2014 Chevrolet Silverado Code
1. What does OBDII code B0086 for a 2014 Chevrolet Silverado indicate?
The OBDII code B0086 in a 2014 Chevrolet Silverado specifically relates to the Right Front Side Impact Sensor.
2. What are the common symptoms of a faulty Right Front Side Impact Sensor in a 2014 Chevrolet Silverado?
Common symptoms of a faulty Right Front Side Impact Sensor may include the airbag warning light staying illuminated or the airbags not deploying properly during a collision.
3. What are the possible causes of OBDII code B0086 in a 2014 Chevrolet Silverado?
Possible causes of code B0086 in a 2014 Chevrolet Silverado can include a malfunctioning sensor, damaged wiring, or issues with the airbag control module.
4. How can I diagnose the Right Front Side Impact Sensor issue in my 2014 Chevrolet Silverado?
Diagnosing the issue with the Right Front Side Impact Sensor may require using a diagnostic scanner to retrieve the specific trouble code, visually inspecting the sensor and related wiring, and conducting continuity tests.
5. Can I repair a B0086 code in my 2014 Chevrolet Silverado at home?
While some basic troubleshooting steps can be done at home, repairing a B0086 code in a 2014 Chevrolet Silverado may require specialized tools and expertise. It is recommended to consult a professional mechanic for proper diagnosis and repair.
6. Is it safe to drive my 2014 Chevrolet Silverado with OBDII code B0086 triggered?
It is not advisable to drive your 2014 Chevrolet Silverado with a triggered B0086 code, as it indicates a potential issue with the Right Front Side Impact Sensor, which is crucial for airbag deployment in case of a collision.
7. How much does it cost to replace the Right Front Side Impact Sensor in a 2014 Chevrolet Silverado?
The cost of replacing the Right Front Side Impact Sensor in a 2014 Chevrolet Silverado can vary depending on the specific sensor model, labor costs, and whether genuine OEM parts are used.
8. Will disconnecting the battery reset the B0086 code in a 2014 Chevrolet Silverado?
Disconnecting the battery may reset the code temporarily, but if the underlying issue with the Right Front Side Impact Sensor is not addressed, the code is likely to reappear after some driving cycles.
9. Can a DIY enthusiast replace the Right Front Side Impact Sensor in a 2014 Chevrolet Silverado?
Replacing the Right Front Side Impact Sensor in a 2014 Chevrolet Silverado may require specialized tools and knowledge of airbag systems. It is recommended to have this task performed by a qualified professional.
10. How often should the Right Front Side Impact Sensor be inspected in a 2014 Chevrolet Silverado?
It is recommended to have the Right Front Side Impact Sensor inspected during routine maintenance checks or whenever symptoms of an issue, such as the airbag warning light, arise in a 2014 Chevrolet Silverado.
Discuss the causes and fixes for B0086 2014 Chevrolet Silverado OBDII Code
Code B0086 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.