B0085 2016 Chevrolet Silverado Code - Left Front Side Impact Sensor
Quick Answer
The B0085 code for a 2016 Chevrolet Silverado refers to an issue with the Left Front Side Impact Sensor. Common causes include Wiring issues or short circuits in the sensor circuit, Faulty Left Front Side Impact Sensor, Corrosion or damage to the sensor due to environmental factors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0085 2016 Chevrolet Silverado indicates Left Front Side Impact Sensor.
- Common causes
- Common causes include Wiring issues or short circuits in the sensor circuit, Faulty Left Front Side Impact Sensor, Corrosion or damage to the sensor due to environmental factors.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0085 2016 Chevrolet Silverado Description
The B0085 code for a 2016 Chevrolet Silverado refers to an issue with the Left Front Side Impact Sensor. This sensor is a crucial component of the vehicle's safety system, as it is responsible for detecting impacts on the left front side of the vehicle and triggering the deployment of the airbags in the event of a collision. When this sensor malfunctions or fails, it can compromise the effectiveness of the airbag system, putting the occupants at risk in the event of an accident.
Common Causes of B0085 2016 Chevrolet Silverado
- Wiring issues or short circuits in the sensor circuit
- Faulty Left Front Side Impact Sensor
- Corrosion or damage to the sensor due to environmental factors
- Issues with the airbag control module
- Previous collision or impact that damaged the sensor
Symptoms of B0085 2016 Chevrolet Silverado
- Airbag warning light illuminated on the dashboard
- Airbags not deploying in a collision
- Inaccurate or erratic airbag deployment
- Vehicle may fail safety inspections or crash tests
How to Fix B0085 2016 Chevrolet Silverado
- Diagnose the issue by using a scan tool to retrieve the B0085 code and inspecting the sensor and wiring for any visible damage.
- Replace the Left Front Side Impact Sensor if it is found to be faulty or damaged.
- Repair any wiring issues or corrosion in the sensor circuit.
- Clear the diagnostic trouble codes and reset the airbag system.
- Perform a test drive to ensure that the airbag system is functioning properly.
Cost to Fix B0085 2016 Chevrolet Silverado
The cost of repairing a Left Front Side Impact Sensor can vary depending on the extent of the damage and the specific components that need to be replaced. On average, the cost of replacing a side impact sensor can range from $200 to $500, including parts and labor. However, it is important to note that labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150. Additionally, prices for parts can vary based on the vehicle make and model. It is recommended to consult with a qualified mechanic or auto repair shop for a more accurate estimate based on your specific vehicle.
Tech Notes for B0085 2016 Chevrolet Silverado
B0085:05 Left Front Side Impact Sensor High Voltage/Open
B0085:0F Left Front Side Impact Sensor Signal Erratic
B0085:39 Left Front Side Impact Sensor Internal Malfunction
B0085:3A Left Front Side Impact Sensor Incorrect Component Installed
B0085:71 Left Front Side Impact Sensor Invalid Data
Need more information about the B0085 2016 Chevrolet Silverado code?
Need more information on how to fix the B0085 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0085 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0085 2016 Chevrolet Silverado Code
1. What does OBDII code B0085 for a 2016 Chevrolet Silverado indicate?
Code B0085 indicates a problem with the Left Front Side Impact Sensor on a 2016 Chevrolet Silverado.
2. What are the common symptoms of a Left Front Side Impact Sensor issue on a 2016 Chevrolet Silverado?
Common symptoms include the airbag warning light illuminating on the dashboard and potential deployment issues with the left front airbag during a collision.
3. What are the possible causes of OBDII code B0085 on a 2016 Chevrolet Silverado?
Potential causes include a faulty left front side impact sensor, damaged wiring or connectors, or issues with the airbag control module.
4. How can I diagnose a Left Front Side Impact Sensor problem on my 2016 Chevrolet Silverado?
Diagnosis typically involves using a scan tool to read the OBDII code, inspecting the sensor and its wiring for damage, and testing the sensor's functionality according to manufacturer specifications.
5. Can I drive my 2016 Chevrolet Silverado with OBDII code B0085?
It is not recommended to drive the vehicle with an active airbag sensor issue, as it may affect the proper deployment of the left front airbag in the event of a collision.
6. How can I repair a Left Front Side Impact Sensor issue on a 2016 Chevrolet Silverado?
Repair options may include replacing the left front side impact sensor, repairing or replacing damaged wiring or connectors, or recalibrating the airbag system after fixing the underlying problem.
7. Is it safe to reset the OBDII code B0085 on my 2016 Chevrolet Silverado without fixing the issue?
Resetting the code without addressing the root cause may temporarily turn off the warning light but will not fix the underlying problem with the left front side impact sensor.
8. How much does it cost to replace a Left Front Side Impact Sensor on a 2016 Chevrolet Silverado?
The cost of replacing the sensor can vary depending on the specific model of the Silverado, labor costs, and whether you choose to use an OEM or aftermarket part.
9. Can a DIY enthusiast replace a Left Front Side Impact Sensor on a 2016 Chevrolet Silverado?
While it is possible for some DIY enthusiasts to replace the sensor, it is recommended to have the repair done by a professional to ensure proper installation and functionality.
10. Are there any recalls related to OBDII code B0085 for the 2016 Chevrolet Silverado?
It is advisable to check with Chevrolet or the National Highway Traffic Safety Administration (NHTSA) for any recalls or service bulletins related to the Left Front Side Impact Sensor on the 2016 Silverado.
Discuss the causes and fixes for B0085 2016 Chevrolet Silverado OBDII Code
Code B0085 2016 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.