B0084 2018 GMC Sierra Code - Right Front Impact Sensor
Quick Answer
The B0084 diagnostic trouble code (DTC) for a 2018 GMC Sierra specifically refers to an issue with the right front impact sensor. Common causes include Impact sensor damaged due to a collision, Wiring or connector issues affecting the sensor's functionality, Corrosion or moisture damage to the sensor or wiring. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0084 2018 GMC Sierra indicates Right Front Impact Sensor.
- Common causes
- Common causes include Impact sensor damaged due to a collision, Wiring or connector issues affecting the sensor's functionality, Corrosion or moisture damage to the sensor or wiring.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0084 2018 GMC Sierra Description
The B0084 diagnostic trouble code (DTC) for a 2018 GMC Sierra specifically refers to an issue with the right front impact sensor. This sensor is a crucial component of the vehicle's supplemental restraint system (SRS), also known as the airbag system. The impact sensor is designed to detect sudden changes in acceleration, such as those that occur during a collision, and trigger the deployment of the airbags to protect the occupants.
Common Causes of B0084 2018 GMC Sierra
- Impact sensor damaged due to a collision.
- Wiring or connector issues affecting the sensor's functionality.
- Corrosion or moisture damage to the sensor or wiring.
- Faulty airbag control module.
- Electrical issues within the SRS system.
Symptoms of B0084 2018 GMC Sierra
- Airbag warning light illuminated on the dashboard.
- Inability to reset the airbag warning light.
- Diagnostic trouble code B0084 stored in the vehicle's computer.
- Airbags not deploying in a collision.
How to Fix B0084 2018 GMC Sierra
- Begin by diagnosing the specific cause of the B0084 code using a scan tool to retrieve the fault codes and pinpoint the issue.
- Inspect the right front impact sensor and associated wiring for any visible damage, corrosion, or loose connections.
- Replace the right front impact sensor if it is found to be faulty or damaged.
- Repair or replace any damaged wiring or connectors in the circuit.
- Clear the DTC from the vehicle's computer and perform a test drive to ensure the issue has been resolved.
Cost to Fix B0084 2018 GMC Sierra
The cost of repairing a B0084 code on a 2018 GMC Sierra can vary depending on the specific cause of the issue and the labor rates in your area. Typically, replacing the right front impact sensor and addressing any associated wiring or connector issues can range from $200 to $500 in parts and labor. However, it's important to note that diagnostic time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate. Additionally, rates may be higher at dealerships or in metropolitan areas, while independent shops may offer more competitive pricing.
Tech Notes for B0084 2018 GMC Sierra
B0084:05 Right Front Impact Sensor Short to Battery or Open
B0084:08 Right Front Impact Sensor Signal Invalid
B0084:0F Right Front Impact Sensor Erratic
B0084:39 Right Front Impact Sensor Internal Electronic Failure
B0084:3A Right Front Impact Sensor Incorrect Component Installed
B0084:71 Right Front Impact Sensor Invalid Serial Data Received
Need more information about the B0084 2018 GMC Sierra code?
Need more information on how to fix the B0084 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0084 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0084 2018 GMC Sierra Code
1. What does OBDII code B0084 for a 2018 GMC Sierra mean?
The B0084 code indicates a problem with the right front impact sensor on the vehicle.
2. What are the common symptoms of a right front impact sensor issue in a GMC Sierra?
Common symptoms include the airbag warning light being illuminated on the dashboard and possible issues with the airbag system.
3. What are the possible causes of the B0084 OBDII code in a 2018 GMC Sierra?
Possible causes include a faulty right front impact sensor, damaged wiring or connectors, or issues with the airbag control module.
4. How serious is a B0084 OBDII code in a GMC Sierra?
This code indicates a potential problem with the airbag system, so it should be addressed promptly to ensure the airbags deploy correctly in the event of an accident.
5. Can I continue driving my GMC Sierra with the B0084 OBDII code?
It's not recommended to drive the vehicle with an active airbag system fault code, as it could compromise the safety features of the vehicle.
6. How can I diagnose and repair a B0084 OBDII code in my 2018 GMC Sierra?
Diagnosis typically involves inspecting the right front impact sensor, wiring, and connectors for damage. Repair may involve replacing the sensor or addressing any wiring issues.
7. Can I reset the B0084 OBDII code in my GMC Sierra myself?
While you can clear the code with an OBDII scanner, it's important to address the underlying issue causing the code to prevent it from recurring.
8. Is it safe to reset the B0084 OBDII code and ignore the issue?
Resetting the code without addressing the underlying problem is not recommended, as it could lead to safety issues in the event of an accident.
9. How much does it cost to repair a B0084 OBDII code in a GMC Sierra?
The cost of repairs can vary depending on the specific issue causing the code, but it's important to address it promptly to ensure the airbag system functions correctly.
10. Can a mechanic help me diagnose and repair a B0084 OBDII code in my GMC Sierra?
Yes, a qualified mechanic or dealership service center can assist in diagnosing and repairing the issue to ensure the airbag system is functioning properly.
Discuss the causes and fixes for B0084 2018 GMC Sierra OBDII Code
Code B0084 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.