B0084 2017 GMC Sierra Code - Right Front Impact Sensor
Quick Answer
The B0084 diagnostic trouble code (DTC) on a 2017 GMC Sierra indicates a problem with the right front impact sensor. Common causes include Faulty impact sensor, Wiring issues or damage to the sensor's wiring harness, Corrosion or damage to the sensor due to environmental factors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0084 2017 GMC Sierra indicates Right Front Impact Sensor.
- Common causes
- Common causes include Faulty impact sensor, Wiring issues or damage to the sensor's wiring harness, Corrosion or damage to the sensor due to environmental factors.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0084 2017 GMC Sierra Description
The B0084 diagnostic trouble code (DTC) on a 2017 GMC Sierra indicates a problem with the right front impact sensor. This sensor is a crucial component of the vehicle's safety system, as it is responsible for detecting impacts or collisions on the front right side of the vehicle. When this sensor malfunctions or fails, it can compromise the accuracy of the airbag deployment system and other safety features.
Common Causes of B0084 2017 GMC Sierra
- Faulty impact sensor
- Wiring issues or damage to the sensor's wiring harness
- Corrosion or damage to the sensor due to environmental factors
- Impact sensor out of calibration
- Software issues in the airbag control module
Symptoms of B0084 2017 GMC Sierra
- Airbag warning light illuminated on the dashboard
- Airbags may not deploy in the event of a collision
- Inaccurate or inconsistent airbag deployment
- Vehicle may fail safety inspections
How to Fix B0084 2017 GMC Sierra
- Diagnose the issue using a scan tool to confirm the B0084 code and pinpoint the exact cause of the problem.
- Inspect the wiring harness and connections for any damage or corrosion. Repair or replace as necessary.
- Test the impact sensor for proper functionality and calibration. Replace the sensor if it is faulty.
- Clear the DTC and reset the airbag system to ensure proper operation.
- Perform a test drive to verify that the issue has been resolved and that the airbag system is functioning correctly.
Cost to Fix B0084 2017 GMC Sierra
The cost of repairing a right front impact sensor on a 2017 GMC Sierra can vary depending on the specific cause of the issue and the cost of parts and labor. On average, the repair cost for this type of issue can range from $200 to $500, including parts and labor. However, it is important to note that labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150. Factors such as location, vehicle make and model, and engine type can also affect the overall repair cost. It is recommended to consult with a qualified mechanic or auto repair shop for a more accurate estimate based on the specific circumstances.
Tech Notes for B0084 2017 GMC Sierra
B0084:05 Right Front Impact Sensor Short to Battery or Open
B0084:08 Right Front Impact Sensor Signal Invalid
B0084:0F Right Front Impact Sensor Erratic
B0084:39 Right Front Impact Sensor Internal Electronic Failure
B0084:3A Right Front Impact Sensor Incorrect Component Installed
B0084:71 Right Front Impact Sensor Invalid Serial Data Received
Need more information about the B0084 2017 GMC Sierra code?
Need more information on how to fix the B0084 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0084 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0084 2017 GMC Sierra Code
1. What does the OBDII code B0084 indicate on a 2017 GMC Sierra?
The code B0084 indicates a fault in the Right Front Impact Sensor circuit, suggesting an issue with the sensor or its wiring.
2. What are common symptoms of code B0084 in a 2017 GMC Sierra?
Common symptoms include the airbag warning light illuminating on the dashboard and potentially the airbags not deploying correctly in the event of an accident.
3. What can cause the B0084 code to appear on a 2017 GMC Sierra?
Causes may include damaged wiring, a faulty right front impact sensor, or problems with the airbag control module.
4. How is the B0084 code diagnosed in a 2017 GMC Sierra?
Diagnosis involves using a scan tool to read the fault code and examining the right front impact sensor and its connections for damage or loose wiring.
5. What steps are involved in repairing code B0084 on a 2017 GMC Sierra?
Repair steps typically include checking and repairing any damaged wiring, replacing the faulty right front impact sensor, and resetting the airbag system to clear the fault code.
6. Is it safe to drive a 2017 GMC Sierra with the B0084 code?
While the vehicle can be driven, safety is compromised because the airbag system may not function correctly in an accident. It is advisable to address the issue promptly.
7. How much does it typically cost to fix the B0084 code in a 2017 GMC Sierra?
Costs can vary widely but generally include the price of the sensor (if replacement is needed) and labor, which can range from $150 to $300 depending on the garage’s hourly rate.
8. Can a faulty right front impact sensor affect other systems in my 2017 GMC Sierra?
While the primary impact is on the airbag system, a fault in this sensor should not affect other vehicle systems. However, the overall safety in a collision is compromised.
9. What tools are needed to diagnose the B0084 code on a 2017 GMC Sierra?
A professional-grade scan tool is required to accurately diagnose the B0084 code, along with basic hand tools for inspecting and possibly replacing the sensor.
Discuss the causes and fixes for B0084 2017 GMC Sierra OBDII Code
Code B0084 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.