B0083 2018 GMC Sierra Code - Left Front Impact Sensor
Quick Answer
The B0083 code on a 2018 GMC Sierra indicates a problem with the left front impact sensor. Common causes include Faulty left front impact sensor, Damaged wiring or connectors, Corrosion or water damage affecting the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0083 2018 GMC Sierra indicates Left Front Impact Sensor.
- Common causes
- Common causes include Faulty left front impact sensor, Damaged wiring or connectors, Corrosion or water damage affecting the sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0083 2018 GMC Sierra Description
The B0083 code on a 2018 GMC Sierra indicates a problem with the left front impact sensor. Impact sensors are crucial components of a vehicle's safety system, as they are responsible for detecting collisions and deploying airbags to protect occupants. The left front impact sensor specifically monitors impacts on the front left side of the vehicle. When this sensor malfunctions or fails, it can compromise the vehicle's ability to deploy airbags accurately in the event of a collision, potentially putting occupants at risk.
Common Causes of B0083 2018 GMC Sierra
- Faulty left front impact sensor.
- Damaged wiring or connectors.
- Corrosion or water damage affecting the sensor.
- Impact or collision that damaged the sensor.
- Electrical issues in the vehicle's system.
Symptoms of B0083 2018 GMC Sierra
- Airbag warning light illuminated on the dashboard.
- Airbags not deploying in a collision.
- Inaccurate or inconsistent airbag deployment.
- Issues with other safety systems, such as seat belt pretensioners.
How to Fix B0083 2018 GMC Sierra
- Diagnose the issue by using a scan tool to retrieve the specific fault code.
- Inspect the left front impact sensor and its wiring for any visible damage.
- Test the sensor's functionality using a multimeter or specialized testing equipment.
- Replace the left front impact sensor if it is found to be faulty.
- Clear the fault code from the vehicle's computer and test the system to ensure proper operation.
Cost to Fix B0083 2018 GMC Sierra
The cost of repairing a left front impact sensor can vary depending on the specific issue and the labor rates in your area. In general, the price of a new impact sensor can range from $100 to $300, while labor costs can add another $100 to $200 to the total. Overall, you can expect to pay anywhere from $200 to $500 for this repair, but it's advisable to obtain quotes from local auto repair shops for a more accurate estimate. Keep in mind that rates can vary based on location, vehicle make and model, and other factors.
Tech Notes for B0083 2018 GMC Sierra
B0083:05 Left Front Impact Sensor Short to Battery or Open
B0083:08 Left Front Impact Sensor Signal Invalid
B0083:0F Left Front Impact Sensor Erratic
B0083:39 Left Front Impact Sensor Internal Electronic Failure
B0083:3A Left Front Impact Sensor Incorrect Component Installed
B0083:71 Left Front Impact Sensor Invalid Serial Data Received
Need more information about the B0083 2018 GMC Sierra code?
Need more information on how to fix the B0083 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0083 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0083 2018 GMC Sierra Code
1. What does OBDII code B0083 for a 2018 GMC Sierra indicate?
The code B0083 on a 2018 GMC Sierra specifically relates to the Left Front Impact Sensor.
2. What are the common symptoms of a Left Front Impact Sensor issue in a 2018 GMC Sierra?
Common symptoms of a Left Front Impact Sensor problem include the airbag warning light staying on, and potential non-deployment of the airbag during a collision.
3. What are the possible causes of OBDII code B0083 in a 2018 GMC Sierra?
Potential causes of code B0083 in a 2018 GMC Sierra may include a malfunctioning impact sensor, wiring issues, or a faulty airbag control module.
4. How can I diagnose a Left Front Impact Sensor problem in my 2018 GMC Sierra?
Diagnosing a Left Front Impact Sensor issue typically involves using a diagnostic scanner to retrieve the specific trouble code and inspecting the sensor and surrounding wiring for any visible damage.
5. Can I still drive my 2018 GMC Sierra with OBDII code B0083 present?
It's not recommended to drive your 2018 GMC Sierra with OBDII code B0083 present, as it may compromise the proper functioning of the airbag system in the event of a collision.
6. What should I do if my airbag warning light is on and shows code B0083 for the Left Front Impact Sensor?
If your airbag warning light is on and displays code B0083, it's best to have the issue diagnosed and repaired by a qualified mechanic to ensure the proper operation of your airbag system.
7. Are there any DIY repair tips for fixing a Left Front Impact Sensor problem in a 2018 GMC Sierra?
While some basic troubleshooting like checking the sensor connections and wiring for damage can be done DIY, it's recommended to have a professional technician perform any repairs related to the airbag system.
8. How much does it typically cost to repair a Left Front Impact Sensor issue in a 2018 GMC Sierra?
The cost of repairing a Left Front Impact Sensor problem can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars including parts and labor.
9. Is it important to address OBDII code B0083 in a timely manner for a 2018 GMC Sierra?
Yes, it's crucial to address code B0083 promptly in a 2018 GMC Sierra to ensure the proper functioning of the airbag system and the overall safety of the vehicle occupants.
10. Can a Left Front Impact Sensor problem be related to other issues in a 2018 GMC Sierra?
While the Left Front Impact Sensor problem is specific, issues with other components of the airbag system or electrical system in the vehicle could potentially be related and should be thoroughly inspected.
Discuss the causes and fixes for B0083 2018 GMC Sierra OBDII Code
Code B0083 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.