B0082 GMC Code - Discard Right Front/Passenger Side Impact Sensor
Quick Answer
The B0082 GMC code indicates a fault in the right front/passenger side impact sensor in the vehicle's safety system. Common causes include Impact sensor wiring harness or connector damage, Impact sensor internal failure, Impact sensor placement or mounting issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0082 GMC indicates Discard Right Front/Passenger Side Impact Sensor.
- Common causes
- Common causes include Impact sensor wiring harness or connector damage, Impact sensor internal failure, Impact sensor placement or mounting issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0082 GMC Description
The B0082 GMC code indicates a fault in the right front/passenger side impact sensor in the vehicle's safety system. Impact sensors are crucial components that detect collisions and deploy airbags to protect occupants in the event of an accident. A faulty sensor can compromise the vehicle's ability to accurately assess impact severity, potentially leading to improper deployment or non-deployment of airbags.
Common Causes of B0082 GMC
- Impact sensor wiring harness or connector damage.
- Impact sensor internal failure.
- Impact sensor placement or mounting issues.
- Corrosion or water damage affecting the sensor.
- Vehicle collision or impact causing sensor damage.
Symptoms of B0082 GMC
- Airbag warning light illuminated on the dashboard.
- Inconsistent or erratic airbag deployment.
- Vehicle fails airbag system self-test.
- Diagnostic trouble code B0082 stored in the vehicle's computer system.
How to Fix B0082 GMC
- Conduct a thorough inspection of the impact sensor and related wiring for any visible damage.
- Test the impact sensor using a diagnostic scan tool to determine if it is sending signals correctly.
- Replace the right front/passenger side impact sensor if it is found to be faulty.
- Clear the diagnostic trouble code from the vehicle's computer system.
- Perform a system reset and test the airbag system to ensure proper functioning.
Cost to Fix B0082 GMC
The cost of replacing a right front/passenger side impact sensor can vary depending on the make and model of the vehicle. On average, the parts cost for a new impact sensor ranges from $100 to $300. The labor cost for sensor replacement can range from $100 to $200, depending on the shop's hourly rates and the complexity of the repair. In total, the repair for a B0082 GMC code could cost between $200 and $500. It's important to note that additional diagnostic and labor charges may apply, and prices can vary based on location and other factors. It is recommended to consult with a professional mechanic for an accurate cost estimate.
Need more information about the B0082 GMC code?
Need more information on how to fix the B0082 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0082 GMC code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0082 GMC Code
1. What are the common symptoms of OBDII code B0082 GMC?
- Common symptoms include the airbag warning light staying illuminated on the dashboard and potential issues with the airbag system.
2. What does the OBDII code B0082 GMC "Discard Right Front/Passenger Side Impact Sensor" mean?
- This code indicates a fault with the right front or passenger side impact sensor in the airbag system.
3. What are the possible causes of OBDII code B0082 GMC?
- Possible causes include a faulty impact sensor, damaged wiring or connectors, or a problem with the airbag control module.
4. How can I diagnose the issue related to OBDII code B0082 GMC?
- Diagnosis typically involves using a scan tool to retrieve the code and then inspecting the right front/passenger side impact sensor and related components for any visible damage or issues.
5. Is it safe to drive with OBDII code B0082 GMC present?
- It is not recommended to drive with this code present as it indicates a potential problem with the airbag system, which may affect its ability to deploy in an accident.
6. How can I repair OBDII code B0082 GMC?
- Repairing this code often involves replacing the right front/passenger side impact sensor, repairing any damaged wiring or connectors, and clearing the code using a scan tool.
7. Can I reset OBDII code B0082 GMC without fixing the underlying issue?
- While you can clear the code temporarily, it is important to address the root cause to ensure the proper functioning of the airbag system.
8. Are there any DIY tips for fixing OBDII code B0082 GMC?
- DIY tips may include checking for loose connections, inspecting the sensor for physical damage, and consulting the vehicle's service manual for specific repair instructions.
9. How much does it typically cost to repair OBDII code B0082 GMC?
- The cost of repairing this code can vary depending on the extent of the damage, the labor rates in your area, and whether you choose to do the repairs yourself or take it to a professional mechanic.
10. Can OBDII code B0082 GMC be a recurring issue?
- If the underlying cause of the code is not properly addressed, it is possible for OBDII code B0082 GMC to reoccur. Regular maintenance and inspection of the airbag system can help prevent this.
Discuss the causes and fixes for B0082 GMC OBDII Code
Code B0082 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.