B0081 2016 GMC Sierra Code - Passenger Presence Module Malfunction
Quick Answer
The B0081 diagnostic trouble code (DTC) for a 2016 GMC Sierra indicates a malfunction in the Passenger Presence Module (PPM). Common causes include Faulty Passenger Presence Module sensor, Damaged or corroded wiring connecting the PPM sensor, Malfunctioning PPM module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0081 2016 GMC Sierra indicates Passenger Presence Module Malfunction.
- Common causes
- Common causes include Faulty Passenger Presence Module sensor, Damaged or corroded wiring connecting the PPM sensor, Malfunctioning PPM module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0081 2016 GMC Sierra Description
The B0081 diagnostic trouble code (DTC) for a 2016 GMC Sierra indicates a malfunction in the Passenger Presence Module (PPM). The PPM is a crucial component of the vehicle's supplemental restraint system (SRS) responsible for detecting the presence and weight of a passenger in the front passenger seat. This information is used to control the deployment of the airbag and adjust its deployment force based on the occupant's size.
Common Causes of B0081 2016 GMC Sierra
- Faulty Passenger Presence Module sensor.
- Damaged or corroded wiring connecting the PPM sensor.
- Malfunctioning PPM module.
- Software issues affecting the PPM system.
- Problem with the airbag control module.
Symptoms of B0081 2016 GMC Sierra
- Airbag warning light illuminated on the dashboard.
- Inconsistent or incorrect airbag deployment.
- Passenger airbag indicator showing an error.
- SRS system warning message displayed on the instrument cluster.
- Loss of communication with the PPM module.
How to Fix B0081 2016 GMC Sierra
- Begin by diagnosing the specific cause of the B0081 code using a professional automotive scan tool.
- Inspect the wiring harness and connectors for any damage or corrosion, repairing or replacing as necessary.
- Test the PPM sensor for proper functionality and replace if faulty.
- Check the PPM module and airbag control module for any issues, replacing them if needed.
- Clear the DTC and perform a test drive to ensure the issue has been resolved.
Cost to Fix B0081 2016 GMC Sierra
The typical repair costs for addressing a B0081 code in a 2016 GMC Sierra can range from $200 to $600, including parts and labor. However, it's important to note that the actual cost may vary depending on the specific diagnosis time and labor rates at auto repair shops. Rates can be influenced by factors such as location, vehicle make and model, and engine type. It's recommended to check with local auto repair shops for a more accurate estimate.
Tech Notes for B0081 2016 GMC Sierra
B0081:11 Passenger Presence Module Above Threshold (Build Check Failure) (sets in the Passenger Presence Module)
B0081:3A Passenger Presence Module Incorrect Component Installed (sets in the Inflatable Restraint Sensing and Diagnostic Module)
B0081:4B Passenger Presence Module Calibration Not Learned (sets in the Passenger Presence Module)
B0081:5A Passenger Presence Module Plausibility Failure (sets in the Passenger Presence Module)
B0081:71 Passenger Presence Module Invalid Serial Data Received (sets in Inflatable Restraint Sensing and Diagnostic Module)
Need more information about the B0081 2016 GMC Sierra code?
Need more information on how to fix the B0081 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0081 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0081 2016 GMC Sierra Code
1. What are common symptoms of the OBDII code B0081 in a 2016 GMC Sierra?
- Common symptoms include the airbag warning light illuminating on the dashboard and a message indicating a "Passenger Presence System Malfunction."
2. What does the OBDII code B0081 indicate in a 2016 GMC Sierra?
- The code B0081 typically indicates a malfunction in the Passenger Presence Module (PPM) of the vehicle.
3. What are possible causes of the Passenger Presence Module malfunction in a 2016 GMC Sierra?
- Common causes include a faulty Passenger Presence Module, damaged wiring or connectors, or issues with the passenger seat sensor.
4. How can I diagnose the Passenger Presence Module issue in my 2016 GMC Sierra?
- Diagnosis typically involves using a diagnostic scanner to retrieve the specific fault code, checking the wiring and connectors for damage, and testing the passenger seat sensor.
5. Can I continue driving my 2016 GMC Sierra with the B0081 code present?
- It is not recommended to drive the vehicle with the B0081 code active, as it indicates a potential issue with the airbag system that may affect passenger safety in the event of a collision.
6. How can I repair the Passenger Presence Module malfunction in my 2016 GMC Sierra?
- Repair options may include replacing the faulty Passenger Presence Module, repairing damaged wiring or connectors, or recalibrating the passenger seat sensor as needed.
7. Are there any DIY tips for troubleshooting the B0081 code in a 2016 GMC Sierra?
- While some basic checks like inspecting wiring connections can be done by DIY enthusiasts, diagnosing and repairing the Passenger Presence Module issue may require specialized tools and expertise.
8. How much does it typically cost to repair the Passenger Presence Module issue in a 2016 GMC Sierra?
- Repair costs can vary depending on the specific cause of the issue, but they may range from a few hundred to over a thousand dollars, including parts and labor.
9. Can resetting the OBDII code B0081 in a 2016 GMC Sierra fix the issue temporarily?
- Resetting the code may temporarily turn off the warning light, but it will not fix the underlying problem with the Passenger Presence Module, and the code is likely to reappear.
10. Is the Passenger Presence Module issue covered under any warranty for a 2016 GMC Sierra?
- Depending on the vehicle's warranty status and coverage, the repair for the Passenger Presence Module issue may be covered under certain warranties, such as the manufacturer's warranty or extended warranty plans.
Discuss the causes and fixes for B0081 2016 GMC Sierra OBDII Code
Code B0081 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.