Engine-Codes.com
Engine-Codes – Generic – B0060

B0060 Code - Driver Seatbelt Tension Sensor

Quick Answer

The B0060 diagnostic trouble code refers to an issue with the driver's seatbelt tension sensor. Common causes include Faulty seatbelt tension sensor, Loose or damaged wiring connections to the sensor, Corrosion or damage to the sensor itself. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B0060 indicates Driver Seatbelt Tension Sensor.
Common causes
Common causes include Faulty seatbelt tension sensor, Loose or damaged wiring connections to the sensor, Corrosion or damage to the sensor itself.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 08, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B0060 Description

The B0060 diagnostic trouble code refers to an issue with the driver's seatbelt tension sensor. This sensor is responsible for monitoring the tension and position of the driver's seatbelt. When the sensor detects abnormal tension or position, it triggers the code to alert the driver of a potential safety concern. This code is crucial for ensuring the proper functioning of the vehicle's safety systems, particularly the seatbelt restraint system.

OBDII Code B0060 - Driver Seatbelt Tension Sensor
B0060 Code - Driver Seatbelt Tension Sensor

Common Causes of B0060

  1. Faulty seatbelt tension sensor.
  2. Loose or damaged wiring connections to the sensor.
  3. Corrosion or damage to the sensor itself.
  4. Issues with the airbag control module.
  5. Vehicle collision or impact affecting the sensor's calibration.

Symptoms of B0060

  1. Airbag warning light illuminated on the dashboard.
  2. Seatbelt warning light stays on even when the seatbelt is buckled.
  3. Seatbelt pretensioner not engaging during sudden stops or collisions.
  4. Audible warning chime when the seatbelt is not buckled.

How to Fix B0060

  1. Begin by diagnosing the specific cause of the B0060 code using a diagnostic scanner.
  2. Inspect the wiring connections to the seatbelt tension sensor for any signs of damage or corrosion. Repair or replace as needed.
  3. Test the sensor's functionality and calibration to ensure it is operating within specifications.
  4. If the sensor is faulty, replace it with a new OEM part to ensure proper operation.
  5. Clear the B0060 code from the vehicle's computer system and perform a test drive to verify that the issue has been resolved.

Cost to Fix B0060

The typical repair costs for addressing the B0060 code can vary depending on the specific cause of the issue and the vehicle's make and model. In general, the cost of replacing a faulty seatbelt tension sensor can range from $150 to $300, including parts and labor. However, additional costs may apply if there are underlying wiring or module issues that need to be addressed. It is advisable to consult with a qualified mechanic or auto repair shop for a more accurate estimate based on your vehicle's specific needs. Keep in mind that labor rates at repair shops can vary, so it's recommended to shop around for the best price.

Need more information about the B0060 code?

Need more information on how to fix the B0060 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0060 code diagnosed by a professional: Find a repair shop in your area

Code B0060 Information for Specific Makes

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0060 Code

1. What are the common symptoms of OBDII code B0060 related to the Driver Seatbelt Tension Sensor?

- Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the seatbelt pretensioner system.

2. What are the possible causes of OBDII code B0060 for the Driver Seatbelt Tension Sensor?

- The code may be triggered by a faulty seatbelt tension sensor, damaged wiring or connectors in the system, or issues with the airbag control module.

3. How can I diagnose the cause of OBDII code B0060 for the Driver Seatbelt Tension Sensor?

- Diagnosing the issue typically involves using a diagnostic scanner to read the code, testing the seatbelt tension sensor, inspecting the wiring, and checking the connections for any issues.

4. Can I continue driving my vehicle with OBDII code B0060 related to the Driver Seatbelt Tension Sensor?

- It is not recommended to drive the vehicle with this code present as it indicates a potential safety issue with the seatbelt pretensioner system.

5. How can I reset OBDII code B0060 for the Driver Seatbelt Tension Sensor?

- Resetting the code may require using a diagnostic scanner to clear it after the underlying issue with the seatbelt tension sensor has been addressed.

6. Is it possible to repair OBDII code B0060 related to the Driver Seatbelt Tension Sensor on my own?

- While some simple causes like loose connections can be fixed at home, diagnosing and repairing issues with the seatbelt tension sensor may require professional help.

7. Are there any safety precautions I should take when dealing with OBDII code B0060 related to the Driver Seatbelt Tension Sensor?

- It is important to disconnect the vehicle's battery before working on any airbag or seatbelt components to avoid accidental deployment.

8. How much does it typically cost to repair OBDII code B0060 for the Driver Seatbelt Tension Sensor?

- The cost of repair can vary depending on the specific issue, but it may involve replacing the seatbelt tension sensor, repairing wiring, or reprogramming the airbag control module.

9. Will OBDII code B0060 for the Driver Seatbelt Tension Sensor affect my vehicle's overall performance?

- This code is related to the safety systems of the vehicle and should be addressed promptly to ensure proper functioning of the seatbelt pretensioner system in case of an accident.

10. Can OBDII code B0060 for the Driver Seatbelt Tension Sensor cause other codes to appear in the system?

- While this code specifically relates to the seatbelt tension sensor, underlying issues with the airbag system may trigger additional fault codes that need to be diagnosed and repaired.

Discuss the causes and fixes for B0060 OBDII Code

Submit a New Comment

Code B0060 comments

No comments found for this page.