B0022 2018 GMC Sierra Code - Passenger Seat Belt Retractor Pretensioner Deployment Loop
Quick Answer
The B0022 diagnostic trouble code (DTC) for a 2018 GMC Sierra relates to the Passenger Seat Belt Retractor Pretensioner Deployment Loop. Common causes include Faulty deployment loop wiring or connectors, Damage to the deployment loop due to wear and tear, Corrosion or moisture ingress affecting the deployment loop. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0022 2018 GMC Sierra indicates Passenger Seat Belt Retractor Pretensioner Deployment Loop.
- Common causes
- Common causes include Faulty deployment loop wiring or connectors, Damage to the deployment loop due to wear and tear, Corrosion or moisture ingress affecting the deployment loop.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0022 2018 GMC Sierra Description
The B0022 diagnostic trouble code (DTC) for a 2018 GMC Sierra relates to the Passenger Seat Belt Retractor Pretensioner Deployment Loop. This code indicates an issue with the passenger seat belt system's pretensioner, which is designed to tighten the seat belt in the event of a collision to secure the occupant in place. The deployment loop is a crucial component of the pretensioner system, responsible for activating the pretensioner when a crash is detected.
Common Causes of B0022 2018 GMC Sierra
- Faulty deployment loop wiring or connectors.
- Damage to the deployment loop due to wear and tear.
- Corrosion or moisture ingress affecting the deployment loop.
- Impact or collision that damages the deployment loop.
- Electrical issues within the pretensioner system.
Symptoms of B0022 2018 GMC Sierra
- Illumination of the airbag warning light on the dashboard.
- Audible warning chime indicating a problem with the seat belt system.
- Inability to properly secure the passenger seat belt.
- Failure of the passenger seat belt to retract or release properly.
How to Fix B0022 2018 GMC Sierra
- Diagnose the specific cause of the B0022 code using a diagnostic scanner to pinpoint the exact issue with the deployment loop.
- Inspect the wiring and connectors of the deployment loop for any damage or corrosion, repairing or replacing as necessary.
- Test the deployment loop and pretensioner system to ensure proper functionality after repairs are made.
- Clear the DTC from the vehicle's computer system to reset the airbag warning light and ensure the issue has been resolved.
- Conduct a thorough test drive to confirm that the passenger seat belt system is operating correctly and the code does not reappear.
Cost to Fix B0022 2018 GMC Sierra
The cost of repairing a B0022 code for the Passenger Seat Belt Retractor Pretensioner Deployment Loop in a 2018 GMC Sierra can vary depending on the extent of the damage and the specific repairs needed. In general, the parts required for this repair, such as wiring, connectors, or a new deployment loop, can range from $100 to $300. Labor costs at an auto repair shop typically range from $80 to $150 per hour, with the total repair time likely to be around 1-2 hours. Therefore, the total cost of repairing this issue could be between $180 and $450, including parts and labor. It is advisable to consult with a qualified mechanic or dealership for a more accurate estimate based on your specific vehicle and location.
Tech Notes for B0022 2018 GMC Sierra
B0022:02 Passenger Seat Belt Anchor Pretensioner Deployment Loop Short to Ground
B0022:04 Passenger Seat Belt Anchor Pretensioner Deployment Loop Open
B0022:0D Passenger Seat Belt Anchor Pretensioner Deployment Loop High Resistance
B0022:0E Passenger Seat Belt Anchor Pretensioner Deployment Loop Low Resistance
Need more information about the B0022 2018 GMC Sierra code?
Need more information on how to fix the B0022 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0022 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0022 2018 GMC Sierra Code
1. What does OBDII code B0022 for a 2018 GMC Sierra mean?
The B0022 code indicates a problem with the Passenger Seat Belt Retractor Pretensioner Deployment Loop.
2. What are the common symptoms of OBDII code B0022 in a 2018 GMC Sierra?
Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the passenger seat belt system.
3. What are some possible causes of OBDII code B0022 in a 2018 GMC Sierra?
Possible causes include a faulty seat belt pretensioner, damaged wiring or connectors in the seat belt system, or a problem with the airbag control module.
4. How serious is OBDII code B0022 in a 2018 GMC Sierra?
Code B0022 should be addressed promptly as it relates to the passenger seat belt pretensioner, an important safety component in the event of a collision.
5. Can I continue to drive my 2018 GMC Sierra with OBDII code B0022?
It is not recommended to drive the vehicle with an active B0022 code, as it may compromise the effectiveness of the passenger seat belt system in an accident.
6. How can I diagnose and repair OBDII code B0022 in my 2018 GMC Sierra?
Diagnosis typically involves inspecting the seat belt pretensioner and associated wiring for any visible damage, and repair may require replacing the faulty components.
7. Is it safe to reset the OBDII code B0022 in a 2018 GMC Sierra using a diagnostic scanner?
While clearing the code may temporarily turn off the warning light, it is crucial to address the underlying issue causing the B0022 code to ensure the safety systems are functioning properly.
8. How much does it cost to fix OBDII code B0022 in a 2018 GMC Sierra?
The cost of repair can vary depending on the root cause of the issue, but it may involve replacing the seat belt pretensioner or repairing damaged wiring, potentially costing a few hundred dollars to over a thousand.
9. Can I fix OBDII code B0022 in my 2018 GMC Sierra myself?
While some DIY enthusiasts may attempt to diagnose and repair the issue, dealing with safety-related components like the seat belt pretensioner is best left to experienced professionals to ensure proper functionality.
10. How often does OBDII code B0022 occur in a 2018 GMC Sierra?
The occurrence of the B0022 code in a 2018 GMC Sierra can vary, but it is not an uncommon issue related to the safety systems of the vehicle.
Discuss the causes and fixes for B0022 2018 GMC Sierra OBDII Code
Code B0022 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.