B0021 2016 GMC Sierra Code - Passenger Seat Side Air Bag Deployment Loop
Quick Answer
The B0021 diagnostic trouble code (DTC) for the 2016 GMC Sierra relates to the passenger seat side airbag deployment loop. Common causes include Faulty passenger seat side airbag deployment loop, Damaged wiring or connectors in the airbag system, Loose or corroded connections in the airbag circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0021 2016 GMC Sierra indicates Passenger Seat Side Air Bag Deployment Loop.
- Common causes
- Common causes include Faulty passenger seat side airbag deployment loop, Damaged wiring or connectors in the airbag system, Loose or corroded connections in the airbag circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0021 2016 GMC Sierra Description
The B0021 diagnostic trouble code (DTC) for the 2016 GMC Sierra relates to the passenger seat side airbag deployment loop. This code indicates a malfunction in the circuit responsible for deploying the side airbag located in the passenger seat. The airbag deployment loop is an essential safety feature designed to activate the airbag in the event of a side impact collision, providing additional protection for the occupant.
Common Causes of B0021 2016 GMC Sierra
- Faulty passenger seat side airbag deployment loop.
- Damaged wiring or connectors in the airbag system.
- Loose or corroded connections in the airbag circuit.
- Malfunctioning airbag control module.
- Impact or damage to the passenger side of the vehicle triggering the code.
Symptoms of B0021 2016 GMC Sierra
- Illumination of the airbag warning light on the dashboard.
- Diagnostic trouble code (DTC) B0021 stored in the vehicle's computer system.
- Inability to reset the airbag warning light even after attempting to clear the code.
- Non-deployment of the passenger side airbag during a crash test or accident.
How to Fix B0021 2016 GMC Sierra
- Begin by diagnosing the specific cause of the B0021 code using a scan tool to retrieve the fault codes and pinpoint the issue.
- Inspect the wiring and connectors in the airbag system for any damage, corrosion, or loose connections. Repair or replace as necessary.
- Test the passenger seat side airbag deployment loop to ensure it is functioning correctly. Replace if faulty.
- Check the airbag control module for any malfunctions and replace if needed.
- Clear the fault codes from the vehicle's computer system and perform a test to verify that the issue has been resolved.
Cost to Fix B0021 2016 GMC Sierra
The cost of repairing the B0021 code on a 2016 GMC Sierra can vary depending on the specific cause of the issue and the labor rates in your area. Typically, the parts required for this repair, such as a new airbag deployment loop or control module, can range from $200 to $500. Labor costs can add an additional $100 to $300, depending on the shop's hourly rates. Overall, you can expect to pay between $300 and $800 for this repair, but prices may vary based on location and other factors. It is recommended to consult with a professional mechanic to get an accurate estimate for your specific situation.
Tech Notes for B0021 2016 GMC Sierra
B0021:02 Passenger Seat Side Air Bag Deployment Loop Short to Ground
B0021:04 Passenger Seat Side Air Bag Deployment Loop Open
B0021:0D Passenger Seat Side Air Bag Deployment Loop High Resistance
B0021:0E Passenger Seat Side Air Bag Deployment Loop Low Resistance
Need more information about the B0021 2016 GMC Sierra code?
Need more information on how to fix the B0021 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0021 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0021 2016 GMC Sierra Code
1. What does OBDII code B0021 for a 2016 GMC Sierra indicate?
The B0021 code specifically refers to a fault in the Passenger Seat Side Air Bag Deployment Loop.
2. What are the common symptoms of OBDII code B0021 in a 2016 GMC Sierra?
Common symptoms include the airbag warning light on the dashboard staying illuminated and potential non-deployment of the passenger side airbag during a collision.
3. What are the possible causes of OBDII code B0021 in a 2016 GMC Sierra?
The code may be triggered by issues such as a faulty airbag deployment loop, damaged wiring, loose connections, or a problem with the airbag control module.
4. How can I diagnose the cause of OBDII code B0021 in my 2016 GMC Sierra?
Diagnosing the issue typically involves using a diagnostic scanner to retrieve the specific fault codes, conducting a visual inspection of the airbag system components, and testing the wiring and connections for continuity.
5. Can I still drive my 2016 GMC Sierra with OBDII code B0021?
It is not recommended to drive the vehicle with the airbag warning light illuminated, as it indicates a potential safety risk in case of an accident.
6. How can I repair OBDII code B0021 in my 2016 GMC Sierra?
Repairing the issue may involve replacing the faulty deployment loop, repairing damaged wiring, securing loose connections, or resetting the airbag control module after the problem has been fixed.
7. Are there any safety concerns associated with OBDII code B0021 in a 2016 GMC Sierra?
Yes, unresolved airbag system issues can compromise passenger safety in the event of a collision, as the airbag may not deploy as intended.
8. Can I reset the OBDII code B0021 in my 2016 GMC Sierra without repairing the issue?
Resetting the code without addressing the underlying problem will likely result in the code reappearing once the system detects the fault again.
9. How much does it cost to fix OBDII code B0021 in a 2016 GMC Sierra?
The cost of fixing the B0021 code can vary depending on the specific cause of the issue, but it may involve parts and labor expenses for diagnosis, repair, and potential component replacements.
10. Can I prevent OBDII code B0021 from recurring in my 2016 GMC Sierra?
Regular maintenance checks, prompt repairs of any airbag system issues, and careful handling of the vehicle can help prevent the recurrence of the B0021 code.
Discuss the causes and fixes for B0021 2016 GMC Sierra OBDII Code
Code B0021 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.