B0020:0E Code - Passenger Instrument Panel Air Bag Deployment Loop Stage 2 Low Resistance
Quick Answer
The B0020:0E diagnostic trouble code indicates that there is low resistance in the passenger instrument panel airbag deployment loop stage 2. Common causes include Damaged wiring or connectors in the airbag deployment loop, Faulty passenger airbag deployment module, Malfunctioning passenger airbag sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0020:0E indicates Passenger Instrument Panel Air Bag Deployment Loop Stage 2 Low Resistance.
- Common causes
- Common causes include Damaged wiring or connectors in the airbag deployment loop, Faulty passenger airbag deployment module, Malfunctioning passenger airbag sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0020:0E Description
The B0020:0E diagnostic trouble code indicates that there is low resistance in the passenger instrument panel airbag deployment loop stage 2. This loop is a crucial component of the vehicle's airbag system, responsible for detecting a collision and deploying the airbag to protect the passenger in the event of an accident. Low resistance in this loop can compromise the proper functioning of the airbag system, potentially leading to the airbag not deploying or deploying improperly in a crash.
Common Causes of B0020:0E
- Damaged wiring or connectors in the airbag deployment loop
- Faulty passenger airbag deployment module
- Malfunctioning passenger airbag sensor
- Corrosion or loose connections in the airbag system
- Impact from a previous collision causing damage to the airbag system
Symptoms of B0020:0E
- Illuminated airbag warning light on the dashboard
- Inability to turn off the passenger airbag
- Intermittent or non-functioning passenger airbag
- Diagnostic trouble code B0020:0E stored in the vehicle's computer system
How to Fix B0020:0E
- Begin by disconnecting the vehicle's battery to prevent accidental airbag deployment.
- Inspect the wiring and connectors in the passenger airbag deployment loop for any damage or corrosion. Repair or replace as needed.
- Test the passenger airbag deployment module and sensor for proper functionality. Replace if faulty.
- Clear the diagnostic trouble code from the vehicle's computer system using a scan tool.
- Reconnect the battery and test the airbag system to ensure proper operation.
Cost to Fix B0020:0E
The cost of repairing a low resistance issue in the passenger instrument panel airbag deployment loop can vary depending on the specific cause of the problem and the cost of parts and labor. On average, the repair cost for this issue can range from $200 to $500. However, it is important to note that labor rates at auto repair shops can vary widely, typically ranging from $80 to $150 per hour. Additionally, the cost of parts such as wiring, connectors, airbag deployment module, or sensor will also contribute to the total repair bill. It is advisable to consult with a professional mechanic to get an accurate estimate based on the specific make and model of the vehicle.
Tech Notes for B0020:0E
B0020:02 Passenger Instrument Panel Air Bag Deployment Loop Stage 2 Short to Ground
B0020:04 Passenger Instrument Panel Air Bag Deployment Loop Stage 2 Open
B0020:0D Passenger Instrument Panel Air Bag Deployment Loop Stage 2 High Resistance
B0020:0E Passenger Instrument Panel Air Bag Deployment Loop Stage 2 Low Resistance
Need more information about the B0020:0E code?
Need more information on how to fix the B0020:0E code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0020:0E code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0020:0E Code
1. What are the common symptoms of OBDII code B0020:0E?
The common symptoms of OBDII code B0020:0E include the airbag warning light illuminating on the dashboard and potential issues with the passenger-side instrument panel airbag deployment.
2. What does the OBDII code B0020:0E indicate?
OBDII code B0020:0E indicates that there is low resistance detected in the passenger instrument panel airbag deployment loop at stage 2.
3. What are the possible causes of OBDII code B0020:0E?
Possible causes of OBDII code B0020:0E include faulty wiring connections, damaged wiring harness, issues with the airbag deployment circuit, or a malfunctioning passenger instrument panel airbag module.
4. How can I diagnose OBDII code B0020:0E?
Diagnosing OBDII code B0020:0E typically involves using a diagnostic scanner to retrieve the code, inspecting the wiring and connections related to the passenger instrument panel airbag, and testing the airbag module for proper functionality.
5. Can I still drive my vehicle with OBDII code B0020:0E present?
It is not recommended to drive your vehicle with OBDII code B0020:0E present, as it indicates a potential issue with the passenger-side airbag system, which could compromise passenger safety in the event of a collision.
6. How can I repair OBDII code B0020:0E?
Repairing OBDII code B0020:0E may involve repairing or replacing damaged wiring, fixing faulty connections, or replacing the passenger instrument panel airbag module to ensure proper airbag deployment functionality.
7. Is it safe to reset the OBDII code B0020:0E without addressing the underlying issue?
It is not safe to simply reset OBDII code B0020:0E without addressing the underlying issue, as it could lead to potential airbag system failures in the future, compromising passenger safety.
8. Can a DIY enthusiast fix OBDII code B0020:0E at home?
While some basic troubleshooting steps can be performed at home, fixing OBDII code B0020:0E may require specialized tools and expertise, so it is recommended to seek professional help for proper diagnosis and repair.
9. How much does it cost to repair OBDII code B0020:0E?
The cost of repairing OBDII code B0020:0E can vary depending on the underlying issue, parts needed for repair, and labor costs. It is advisable to consult a mechanic for an accurate estimate.
10. How often does OBDII code B0020:0E occur in vehicles?
OBDII code B0020:0E is relatively uncommon but can occur in vehicles with issues related to the passenger instrument panel airbag deployment loop. Regular maintenance and inspection of the airbag system can help prevent this code from appearing.
Discuss the causes and fixes for B0020:0E OBDII Code
Code B0020:0E comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.