B001E 2018 GMC Sierra Code - Driver Seat Inboard Side Air Bag Deployment Loop
Quick Answer
The B001E diagnostic code for a 2018 GMC Sierra indicates a problem with the driver seat inboard side airbag deployment loop. Common causes include Faulty wiring or connections in the deployment loop, Damage to the deployment loop due to wear and tear, Malfunctioning airbag control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B001E 2018 GMC Sierra indicates Driver Seat Inboard Side Air Bag Deployment Loop.
- Common causes
- Common causes include Faulty wiring or connections in the deployment loop, Damage to the deployment loop due to wear and tear, Malfunctioning airbag control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B001E 2018 GMC Sierra Description
The B001E diagnostic code for a 2018 GMC Sierra indicates a problem with the driver seat inboard side airbag deployment loop. This loop is a crucial part of the vehicle's safety system, as it is responsible for deploying the airbag in case of a collision on the inboard side of the driver's seat. When this code is triggered, it means that there is a malfunction or issue with the deployment loop, which could potentially prevent the airbag from deploying properly in an accident. This can pose a significant safety risk to the driver and passengers in the vehicle.
Common Causes of B001E 2018 GMC Sierra
- Faulty wiring or connections in the deployment loop.
- Damage to the deployment loop due to wear and tear.
- Malfunctioning airbag control module.
- Corrosion or rust affecting the components of the deployment loop.
Symptoms of B001E 2018 GMC Sierra
- Airbag warning light illuminates on the dashboard.
- Driver seat airbag may not deploy in a collision.
- Vehicle may fail airbag deployment system self-test.
- Diagnostic trouble code B001E is stored in the vehicle's computer system.
How to Fix B001E 2018 GMC Sierra
- Diagnose the issue using a scan tool to retrieve the specific trouble code and pinpoint the exact cause of the problem.
- Inspect the wiring, connections, and components of the driver seat inboard side airbag deployment loop for any damage or corrosion.
- Repair or replace any faulty wiring, connectors, or components as needed.
- Clear the diagnostic trouble code from the vehicle's computer system.
- Perform a test to ensure that the airbag deployment system is functioning properly.
Cost to Fix B001E 2018 GMC Sierra
The cost of repairing a B001E diagnostic code for a driver seat inboard side airbag deployment loop can vary depending on the extent of the damage and the specific repairs needed. On average, the repair costs for this issue can range from $200 to $500, including parts and labor. However, it's important to note that the actual cost may be higher or lower based on the factors mentioned earlier. It is recommended to consult with a professional mechanic or auto repair shop for a more accurate estimate based on the specific circumstances of the vehicle.
Tech Notes for B001E 2018 GMC Sierra
B001E:02 Driver Seat Inboard Side Air Bag Deployment Loop Short to Ground
B001E:04 Driver Seat Inboard Side Air Bag Deployment Loop Open
B001E:0D Driver Seat Inboard Side Air Bag Deployment Loop High Resistance
B001E:0E Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance
Need more information about the B001E 2018 GMC Sierra code?
Need more information on how to fix the B001E 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B001E 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B001E 2018 GMC Sierra Code
1. What does OBDII code B001E for a 2018 GMC Sierra indicate?
The B001E code specifically relates to the Driver Seat Inboard Side Air Bag Deployment Loop on a 2018 GMC Sierra.
2. What are common symptoms of OBDII code B001E in a 2018 GMC Sierra?
Common symptoms may include the airbag warning light staying illuminated on the dashboard and potential non-deployment of the driver seat inboard side airbag during a collision.
3. What are possible causes of OBDII code B001E in a 2018 GMC Sierra?
Causes of the B001E code can include a fault in the driver seat inboard side airbag deployment loop circuit, a malfunctioning airbag module, or issues with the wiring connections.
4. How can I diagnose the OBDII code B001E in my 2018 GMC Sierra?
Diagnosis typically involves using an OBDII scanner to retrieve the specific fault codes, followed by inspecting the driver seat inboard side airbag system for any visible damage or loose connections.
5. Can I continue driving my 2018 GMC Sierra with OBDII code B001E?
It is not recommended to drive the vehicle with an active airbag fault code, as it can compromise the safety systems in the event of an accident. Prompt attention to the issue is advised.
6. What are some repair tips for addressing OBDII code B001E in a 2018 GMC Sierra?
Repair tips may include checking and repairing any damaged wiring, replacing a faulty airbag module, or seeking assistance from a qualified mechanic to properly diagnose and fix the issue.
7. Is it safe to attempt DIY repairs for OBDII code B001E on a 2018 GMC Sierra?
Due to the critical nature of airbag systems, it is generally recommended to have repairs related to airbag fault codes performed by a professional with the necessary expertise and tools.
8. How much does it typically cost to repair OBDII code B001E in a 2018 GMC Sierra?
The cost of repairing the B001E code can vary depending on the exact cause of the issue and the required repairs. Costs may include parts, labor, and diagnostic fees.
9. Are there any recalls or service bulletins related to OBDII code B001E in a 2018 GMC Sierra?
It's advisable to check with a GMC dealership or visit the National Highway Traffic Safety Administration (NHTSA) website to see if there are any relevant recalls or service bulletins for this specific OBDII code.
10. How can I prevent OBDII code B001E from recurring in my 2018 GMC Sierra?
Regular maintenance and inspections of the airbag system, including checking for loose connections and damaged wiring, can help prevent the reoccurrence of the B001E fault code.
Discuss the causes and fixes for B001E 2018 GMC Sierra OBDII Code
Code B001E 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.