B001E 2017 GMC Sierra Code - Driver Seat Inboard Side Air Bag Deployment Loop
Quick Answer
The B001E diagnostic trouble code for a 2017 GMC Sierra relates to the driver seat inboard side airbag deployment loop. Common causes include Damaged wiring or connectors in the airbag deployment circuit, Faulty driver seat inboard side airbag module, Malfunctioning crash sensor that triggers the airbag deployment. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B001E 2017 GMC Sierra indicates Driver Seat Inboard Side Air Bag Deployment Loop.
- Common causes
- Common causes include Damaged wiring or connectors in the airbag deployment circuit, Faulty driver seat inboard side airbag module, Malfunctioning crash sensor that triggers the airbag deployment.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B001E 2017 GMC Sierra Description
The B001E diagnostic trouble code for a 2017 GMC Sierra relates to the driver seat inboard side airbag deployment loop. This code indicates a potential issue with the circuit that controls the deployment of the airbag located on the inboard side of the driver's seat. The airbag deployment loop is an essential safety feature designed to activate the airbag in the event of a collision, providing additional protection for the driver.
Common Causes of B001E 2017 GMC Sierra
- Damaged wiring or connectors in the airbag deployment circuit.
- Faulty driver seat inboard side airbag module.
- Malfunctioning crash sensor that triggers the airbag deployment.
- Issues with the airbag deployment system itself.
- Corrosion or moisture damage affecting the circuit components.
Symptoms of B001E 2017 GMC Sierra
- Illumination of the airbag warning light on the dashboard.
- Error code B001E displayed on the vehicle's diagnostic system.
- Inability to reset the airbag warning light after clearing the code.
- Loss of functionality in the driver seat inboard side airbag.
How to Fix B001E 2017 GMC Sierra
- Begin by diagnosing the specific cause of the B001E code using a diagnostic scanner.
- Inspect the wiring and connectors in the airbag deployment circuit for any damage or corrosion.
- Test the driver seat inboard side airbag module for proper functionality and replace if necessary.
- Check the crash sensor and other components related to the airbag deployment system for faults.
- Clear the B001E code from the vehicle's system after completing the repairs and ensure that the airbag warning light is no longer illuminated.
Cost to Fix B001E 2017 GMC Sierra
The typical repair costs for addressing a B001E code in a 2017 GMC Sierra can vary depending on the specific cause of the issue and the extent of the repairs needed. On average, the cost of parts for this repair could range from $200 to $500, with labor costs adding an additional $100 to $300. Overall, the total repair bill for resolving this issue could fall between $300 and $800. It's important to note that these estimates are general guidelines and actual costs may vary based on factors such as the location of the repair shop, the make and model of the vehicle, and the availability of parts. Additionally, labor rates at auto repair shops can range from $80 to $150 per hour, so it's advisable to inquire about specific rates when seeking repairs for a B001E code.
Tech Notes for B001E 2017 GMC Sierra
B001E:02 Driver Seat Inboard Side Air Bag Deployment Loop Short to Ground
B001E:04 Driver Seat Inboard Side Air Bag Deployment Loop Open
B001E:0D Driver Seat Inboard Side Air Bag Deployment Loop High Resistance
B001E:0E Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance
Need more information about the B001E 2017 GMC Sierra code?
Need more information on how to fix the B001E 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B001E 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B001E 2017 GMC Sierra Code
1. What does OBDII code B001E mean for a 2017 GMC Sierra?
When this code appears, it indicates an issue with the Driver Seat Inboard Side Air Bag Deployment Loop in your vehicle.
2. What are the common symptoms of OBDII code B001E in a 2017 GMC Sierra?
Common symptoms include the airbag warning light illuminating on the dashboard and potential problems with the driver seat airbag system.
3. What are possible causes of OBDII code B001E in a 2017 GMC Sierra?
Causes can include a faulty driver seat airbag deployment loop, damaged wiring, a malfunctioning airbag module, or issues with the airbag sensor.
4. How can I diagnose the OBDII code B001E in my 2017 GMC Sierra?
Diagnosis typically involves using a professional OBDII scanner to retrieve the specific fault code and then inspecting the driver seat airbag system components for any visible damage or issues.
5. Can I drive my 2017 GMC Sierra with OBDII code B001E?
It is not recommended to drive the vehicle with an active airbag fault code, as it can compromise the safety features of the driver seat airbag system.
6. How can I repair OBDII code B001E in my 2017 GMC Sierra?
Repairing this code may involve replacing the driver seat airbag deployment loop, repairing damaged wiring, resetting the airbag module, or addressing any underlying issues with the airbag system components.
7. Is it safe to reset the OBDII code B001E in a 2017 GMC Sierra on my own?
Resetting the code may temporarily clear the warning light, but it is crucial to address the root cause of the issue to ensure the proper functioning of the driver seat airbag system.
8. Are there any safety precautions to take when dealing with OBDII code B001E in a 2017 GMC Sierra?
When working on the airbag system, always disconnect the vehicle's battery and wait for a few minutes to allow any stored energy to dissipate before starting any repairs to prevent accidental airbag deployment.
9. Can a DIY enthusiast fix OBDII code B001E in a 2017 GMC Sierra?
While some minor repairs may be possible for experienced DIY individuals, it is recommended to consult a professional mechanic or authorized service center for accurate diagnosis and proper repair of airbag system faults.
10. How much does it cost to repair OBDII code B001E in a 2017 GMC Sierra?
The cost of repairs can vary depending on the specific issue causing the fault code. It is advisable to obtain a diagnostic assessment from a qualified technician to determine the exact repairs needed and associated costs.
Discuss the causes and fixes for B001E 2017 GMC Sierra OBDII Code
Code B001E 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.