Engine-Codes.com
Engine-Codes – Chevrolet – B001E 2017 Chevrolet Silverado

B001E 2017 Chevrolet Silverado Code - Driver Seat Inboard Side Air Bag Deployment Loop

Quick Answer

The B001E diagnostic trouble code (DTC) for a 2017 Chevrolet Silverado refers to an issue with the driver seat inboard side airbag deployment loop. Common causes include Faulty wiring or connections in the airbag deployment loop circuit, Damage to the airbag deployment loop components, Corrosion or moisture in the circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B001E 2017 Chevrolet Silverado indicates Driver Seat Inboard Side Air Bag Deployment Loop.
Common causes
Common causes include Faulty wiring or connections in the airbag deployment loop circuit, Damage to the airbag deployment loop components, Corrosion or moisture in the circuit.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 17, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B001E 2017 Chevrolet Silverado Description

The B001E diagnostic trouble code (DTC) for a 2017 Chevrolet Silverado refers to an issue with the driver seat inboard side airbag deployment loop. This code indicates a problem with the circuit that controls the deployment of the airbag located on the inboard side of the driver's seat. The airbag deployment loop is a crucial component of the vehicle's safety system, designed to activate the airbag in the event of a collision to protect the driver from impact.

OBDII Code B001E 2017 Chevrolet Silverado - Driver Seat Inboard Side Air Bag Deployment Loop
B001E 2017 Chevrolet Silverado Code - Driver Seat Inboard Side Air Bag Deployment Loop

Common Causes of B001E 2017 Chevrolet Silverado

  1. Faulty wiring or connections in the airbag deployment loop circuit
  2. Damage to the airbag deployment loop components
  3. Corrosion or moisture in the circuit
  4. Malfunctioning airbag control module
  5. Impact or collision that damaged the airbag system

Symptoms of B001E 2017 Chevrolet Silverado

  1. Illumination of the airbag warning light on the dashboard
  2. Error message displayed on the instrument cluster
  3. Inability to activate or deactivate the airbag system
  4. Loss of communication with the airbag control module

How to Fix B001E 2017 Chevrolet Silverado

  1. Begin by conducting a thorough inspection of the airbag deployment loop circuit to identify any damaged or faulty components.
  2. Test the wiring and connections for continuity and proper voltage to pinpoint the source of the issue.
  3. Replace any damaged wiring, connectors, or components in the airbag deployment loop circuit.
  4. Clear the DTC from the vehicle's memory using a diagnostic scanner to reset the system.
  5. Perform a final test to ensure that the airbag system is functioning correctly and that the code has been successfully resolved.

Cost to Fix B001E 2017 Chevrolet Silverado

The cost of repairing a B001E DTC for a driver seat inboard side airbag deployment loop on a 2017 Chevrolet Silverado can vary depending on the extent of the damage and the specific components that need to be replaced. In general, the repair costs for this issue can range from $200 to $500, including parts and labor. It is important to note that diagnostic time and labor rates at auto repair shops can vary, so it is advisable to check with local shops for a more accurate estimate. Keep in mind that rates may be higher at dealerships or in metropolitan areas, while independent shops may offer more competitive prices.

What does this mean?

Tech Notes for B001E 2017 Chevrolet Silverado

B001E:01 Driver Seat Inboard Side Air Bag Deployment Loop Short to Battery

B001E:02 Driver Seat Inboard Side Air Bag Deployment Loop Short to Ground

B001E:04 Driver Seat Inboard Side Air Bag Deployment Loop Open

B001E:0D Driver Seat Inboard Side Air Bag Deployment Loop High Resistance

B001E:0E Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance

Need more information about the B001E 2017 Chevrolet Silverado code?

Need more information on how to fix the B001E 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B001E 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B001E 2017 Chevrolet Silverado Code

1. What does the OBDII code B001E for the 2017 Chevrolet Silverado indicate?

The code B001E specifically refers to the Driver Seat Inboard Side Air Bag Deployment Loop circuit.

2. What are the common symptoms associated with OBDII code B001E in a 2017 Chevrolet Silverado?

Common symptoms of this code may include an illuminated airbag warning light on the dashboard and a message indicating an issue with the driver seat airbag system.

3. What are some possible causes of the B001E code in a 2017 Chevrolet Silverado?

Potential causes of the B001E code can include a faulty driver seat inboard side airbag deployment loop, damaged wiring or connectors in the airbag system, or a malfunctioning airbag control module.

4. How can I diagnose the OBDII code B001E in my 2017 Chevrolet Silverado?

Diagnosing the B001E code typically involves using a professional OBDII scanner to retrieve the specific fault code, followed by inspecting the driver seat airbag system components for any visible damage or issues.

5. Is it safe to drive my 2017 Chevrolet Silverado with the B001E code present?

It is not recommended to drive the vehicle with the B001E code active, as it indicates a potential issue with the driver seat airbag system, which could compromise occupant safety in the event of a collision.

6. Can I repair the B001E code in my 2017 Chevrolet Silverado myself?

While some basic inspections and checks can be done by DIY enthusiasts, repairing the B001E code often requires specialized tools and expertise to properly diagnose and fix the underlying issue with the driver seat airbag deployment loop.

7. How much does it typically cost to repair the B001E code in a 2017 Chevrolet Silverado?

The cost of repairing the B001E code can vary depending on the exact cause of the issue, but it may involve replacing components like the driver seat inboard side airbag deployment loop, repairing damaged wiring, or reprogramming the airbag control module.

8. Are there any recalls or service bulletins related to the B001E code in the 2017 Chevrolet Silverado?

It's advisable to check with a Chevrolet dealership or the manufacturer's website to see if there are any recalls or service bulletins addressing the B001E code specifically for the 2017 Silverado model.

9. How can I prevent the recurrence of the B001E code in my 2017 Chevrolet Silverado?

Regular maintenance checks, avoiding physical damage to the airbag system components, and addressing any warning lights promptly can help prevent the reoccurrence of the B001E code in your Silverado.

10. Can the B001E code in a 2017 Chevrolet Silverado be related to other airbag issues in the vehicle?

While the B001E code specifically relates to the driver seat inboard side airbag deployment loop, it's essential to have a comprehensive inspection of the entire airbag system to ensure there are no other underlying issues affecting overall safety.

Discuss the causes and fixes for B001E 2017 Chevrolet Silverado OBDII Code

Submit a New Comment

Code B001E 2017 Chevrolet Silverado comments

No comments found for this page.