Engine-Codes.com
Engine-Codes – GMC – B001E 2014 GMC Sierra

B001E 2014 GMC Sierra Code - Driver Seat Inboard Side Air Bag Deployment Loop

Quick Answer

The B001E diagnostic trouble code (DTC) for a 2014 GMC Sierra specifically relates to the driver seat inboard side airbag deployment loop. Common causes include Wiring issues, such as a short circuit or open circuit in the deployment loop, Faulty sensor or sensor connection related to the driver seat inboard side airbag, Malfunctioning airbag module that controls the deployment of the airbag. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B001E 2014 GMC Sierra indicates Driver Seat Inboard Side Air Bag Deployment Loop.
Common causes
Common causes include Wiring issues, such as a short circuit or open circuit in the deployment loop, Faulty sensor or sensor connection related to the driver seat inboard side airbag, Malfunctioning airbag module that controls the deployment of the airbag.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B001E 2014 GMC Sierra Description

The B001E diagnostic trouble code (DTC) for a 2014 GMC Sierra specifically relates to the driver seat inboard side airbag deployment loop. This code indicates a potential issue with the circuit that controls the deployment of the driver seat inboard side airbag in the event of a collision. The inboard side airbag is designed to provide additional protection to the driver in the case of a side impact.

OBDII Code B001E 2014 GMC Sierra - Driver Seat Inboard Side Air Bag Deployment Loop
B001E 2014 GMC Sierra Code - Driver Seat Inboard Side Air Bag Deployment Loop

Common Causes of B001E 2014 GMC Sierra

  1. Wiring issues, such as a short circuit or open circuit in the deployment loop.
  2. Faulty sensor or sensor connection related to the driver seat inboard side airbag.
  3. Malfunctioning airbag module that controls the deployment of the airbag.
  4. Corrosion or damage to the connectors in the deployment loop circuit.
  5. Impact or collision that may have damaged the deployment loop components.

Symptoms of B001E 2014 GMC Sierra

  1. Illumination of the airbag warning light on the dashboard.
  2. Error message or warning displayed on the instrument cluster.
  3. Inability to activate or deploy the driver seat inboard side airbag during a collision.
  4. Intermittent or inconsistent airbag deployment.

How to Fix B001E 2014 GMC Sierra

  1. Begin by diagnosing the specific cause of the B001E code using a diagnostic scanner to pinpoint the issue.
  2. Inspect the wiring and connectors in the deployment loop circuit for any signs of damage, corrosion, or loose connections.
  3. Test the sensors and airbag module to determine if they are functioning correctly or need to be replaced.
  4. Repair or replace any damaged components in the deployment loop circuit, such as wiring, connectors, sensors, or the airbag module.
  5. Clear the DTC from the vehicle's system and perform a test to ensure that the driver seat inboard side airbag deploys properly.

Cost to Fix B001E 2014 GMC Sierra

The typical repair costs for addressing a B001E code related to the driver seat inboard side airbag deployment loop in a 2014 GMC Sierra can vary depending on the specific cause of the issue. On average, the repair costs for this type of airbag-related problem can range from $200 to $800, including parts and labor. However, it's important to note that the actual cost may be higher or lower based on factors such as the location of the repair shop, the make and model of the vehicle, and the extent of the repairs needed. Additionally, diagnostic time and labor rates at auto repair shops can vary, with hourly rates typically ranging between $80 and $150. It's recommended to consult with a professional mechanic or repair shop for a more accurate estimate based on the specific circumstances of the vehicle.

What does this mean?

Tech Notes for B001E 2014 GMC Sierra

B001E:01 Driver Seat Inboard Side Air Bag Deployment Loop Short to Battery

B001E:02 Driver Seat Inboard Side Air Bag Deployment Loop Short to Ground

B001E:04 Driver Seat Inboard Side Air Bag Deployment Loop Open

B001E:0D Driver Seat Inboard Side Air Bag Deployment Loop High Resistance

B001E:0E Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance

Need more information about the B001E 2014 GMC Sierra code?

Need more information on how to fix the B001E 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B001E 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B001E 2014 GMC Sierra Code

1. What does OBDII code B001E for a 2014 GMC Sierra indicate?

The B001E code specifically pertains to the Driver Seat Inboard Side Air Bag Deployment Loop circuit.

2. What are the common symptoms of OBDII code B001E in a 2014 GMC Sierra?

Common symptoms may include the airbag warning light illuminating on the dashboard and a potential message indicating an issue with the driver seat airbag system.

3. What are some possible causes of OBDII code B001E in a 2014 GMC Sierra?

Potential causes include a faulty driver seat inboard side airbag deployment loop, damaged wiring or connectors in the airbag system, or a malfunctioning airbag control module.

4. How can I diagnose OBDII code B001E in my 2014 GMC Sierra?

Diagnosis typically involves using an OBDII scanner to retrieve the specific trouble code, inspecting the driver seat airbag system components for damage, and testing the airbag deployment loop for continuity.

5. Is it safe to drive my 2014 GMC Sierra with OBDII code B001E?

It is not recommended to drive the vehicle with an active airbag fault code, as it may compromise the effectiveness of the airbag system in the event of a collision.

6. Can I reset the OBDII code B001E in my 2014 GMC Sierra myself?

While you can clear the code using an OBDII scanner, it is crucial to address the underlying issue causing the fault code to prevent it from recurring.

7. How much does it typically cost to repair OBDII code B001E in a 2014 GMC Sierra?

The cost of repair can vary depending on the exact cause of the issue, but it may involve replacing the driver seat inboard side airbag deployment loop, repairing damaged wiring, or reprogramming the airbag control module.

8. Are there any safety precautions I should take when working on the airbag system to resolve OBDII code B001E?

It is highly recommended to disconnect the vehicle's battery and wait at least 10 minutes before working on the airbag system to prevent accidental deployment and ensure safety.

9. Can a DIY enthusiast with some automotive knowledge fix OBDII code B001E in a 2014 GMC Sierra?

While some basic troubleshooting steps can be performed by a DIY enthusiast, dealing with airbag systems requires specialized knowledge and tools, so it is advisable to seek professional help for repairs.

10. How long does it typically take to repair OBDII code B001E in a 2014 GMC Sierra?

The repair time can vary based on the exact cause of the issue and the availability of parts, but it may range from a few hours to a full day, depending on the complexity of the repair needed.

Discuss the causes and fixes for B001E 2014 GMC Sierra OBDII Code

Submit a New Comment

Code B001E 2014 GMC Sierra comments

No comments found for this page.