Engine-Codes.com
Engine-Codes – Generic – B001E:0E

B001E:0E Code - Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance

Quick Answer

The diagnostic trouble code B001E:0E indicates a problem with the driver seat inboard side airbag deployment loop's low resistance. Common causes include Damaged wiring or connectors in the deployment loop, Faulty airbag module, Corrosion on the connectors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B001E:0E indicates Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance.
Common causes
Common causes include Damaged wiring or connectors in the deployment loop, Faulty airbag module, Corrosion on the connectors.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 11, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B001E:0E Description

The diagnostic trouble code B001E:0E indicates a problem with the driver seat inboard side airbag deployment loop's low resistance. The airbag system in modern vehicles is designed to deploy in the event of a collision to provide additional protection for the occupants. The deployment loop consists of a circuit that includes the airbag module, wiring harness, and connectors. Low resistance in this circuit can prevent the airbag from deploying properly when needed, compromising the safety of the driver.

OBDII Code B001E:0E - Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance
B001E:0E Code - Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance

Common Causes of B001E:0E

  1. Damaged wiring or connectors in the deployment loop
  2. Faulty airbag module
  3. Corrosion on the connectors
  4. Loose connections in the circuit
  5. Manufacturing defect in the airbag system components

Symptoms of B001E:0E

  1. Airbag warning light illuminated on the dashboard
  2. Error code displayed on the vehicle's diagnostic system
  3. Loss of functionality in the driver seat airbag
  4. Inability to pass a state inspection due to airbag system fault

How to Fix B001E:0E

  1. Diagnose the issue using a scan tool to confirm the code and pinpoint the exact cause of the low resistance.
  2. Inspect the wiring harness, connectors, and airbag module for any visible damage or corrosion.
  3. Repair or replace damaged wiring, connectors, or the airbag module as needed.
  4. Clear the trouble code from the vehicle's system and perform a test to ensure the issue has been resolved.
  5. Reset the airbag system and verify proper functionality to ensure the safety of the driver.

Cost to Fix B001E:0E

The cost of repairing a driver seat inboard side airbag deployment loop with low resistance can vary depending on the extent of the damage and the specific components that need to be replaced. On average, the repair costs for this issue can range from $200 to $500, including parts and labor. However, it's important to note that labor rates and part prices can vary between different auto repair shops and locations. It's recommended to consult with a trusted mechanic or dealership to get a more accurate estimate based on your vehicle make and model.

What does this mean?

Tech Notes for B001E:0E

B001E:01 Driver Seat Inboard Side Air Bag Deployment Loop Short to Battery

B001E:02 Driver Seat Inboard Side Air Bag Deployment Loop Short to Ground

B001E:04 Driver Seat Inboard Side Air Bag Deployment Loop Open

B001E:0D Driver Seat Inboard Side Air Bag Deployment Loop High Resistance

B001E:0E Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance

Need more information about the B001E:0E code?

Need more information on how to fix the B001E:0E code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B001E:0E code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B001E:0E Code

1. What are the common symptoms of OBDII code B001E:0E related to the driver seat inboard side airbag deployment loop low resistance?

The common symptoms include the airbag warning light illuminating on the dashboard and a potential message indicating an issue with the driver seat airbag system.

2. What are the possible causes of OBDII code B001E:0E for the driver seat inboard side airbag deployment loop low resistance?

Potential causes may include a faulty inboard side airbag deployment loop, damaged wiring or connectors in the airbag system, or issues with the airbag control module.

3. How serious is the issue indicated by OBDII code B001E:0E for the driver seat inboard side airbag deployment loop low resistance?

This issue is considered serious as it pertains to the driver seat airbag system, which plays a critical role in occupant safety during a collision. It is recommended to address this problem promptly.

4. Can I continue driving with OBDII code B001E:0E present for the driver seat inboard side airbag deployment loop low resistance?

It is not advisable to continue driving with this code present, as it indicates a potential problem with the driver seat airbag system. Continuing to drive could compromise your safety in the event of a collision.

5. How can I diagnose and repair OBDII code B001E:0E for the driver seat inboard side airbag deployment loop low resistance?

Diagnosis typically involves inspecting the inboard side airbag deployment loop, checking wiring and connectors for damage, and using a diagnostic tool to reset the code after repairs are made. Professional help may be needed.

6. Are there any DIY repair tips for addressing OBDII code B001E:0E related to the driver seat inboard side airbag deployment loop low resistance?

While some basic inspections like checking for loose connections or visible damage can be done, it is recommended to seek professional assistance for diagnosing and repairing issues with the airbag system.

7. How much does it cost to repair OBDII code B001E:0E for the driver seat inboard side airbag deployment loop low resistance?

The cost of repair can vary depending on the specific cause of the issue. It may involve replacing the inboard side airbag deployment loop, repairing damaged wiring, or addressing issues with the airbag control module.

8. Can resetting the OBDII code B001E:0E for the driver seat inboard side airbag deployment loop low resistance fix the problem?

Simply resetting the code may temporarily clear the warning light, but it will not fix the underlying issue causing the low resistance in the driver seat inboard side airbag deployment loop. Proper diagnosis and repair are necessary.

9. How often does OBDII code B001E:0E for the driver seat inboard side airbag deployment loop low resistance occur in vehicles?

The occurrence of this code can vary, but issues related to the driver seat inboard side airbag deployment loop low resistance are not uncommon in vehicles equipped with airbag systems.

10. Is it safe to drive my vehicle if OBDII code B001E:0E is indicating a problem with the driver seat inboard side airbag deployment loop?

It is not recommended to drive the vehicle if there is a known issue with the driver seat inboard side airbag deployment loop, as it could compromise the functionality of the airbag system in the event of a collision.

Discuss the causes and fixes for B001E:0E OBDII Code

Submit a New Comment

Code B001E:0E comments

No comments found for this page.