B001E:0D Code - Driver Seat Inboard Side Air Bag Deployment Loop High Resistance
Quick Answer
The B001E:0D diagnostic trouble code indicates that there is high resistance detected in the driver seat inboard side airbag deployment loop. Common causes include Damaged wiring or connectors in the driver seat inboard side airbag deployment loop, Faulty airbag module, Corrosion or poor connection at the airbag deployment loop. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B001E:0D indicates Driver Seat Inboard Side Air Bag Deployment Loop High Resistance.
- Common causes
- Common causes include Damaged wiring or connectors in the driver seat inboard side airbag deployment loop, Faulty airbag module, Corrosion or poor connection at the airbag deployment loop.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B001E:0D Description
The B001E:0D diagnostic trouble code indicates that there is high resistance detected in the driver seat inboard side airbag deployment loop. This loop is part of the vehicle's supplemental restraint system (SRS) and is responsible for deploying the airbag in the event of a collision. High resistance in this loop can prevent the airbag from deploying properly, which poses a significant safety risk to the driver in the event of an accident.
Common Causes of B001E:0D
- Damaged wiring or connectors in the driver seat inboard side airbag deployment loop
- Faulty airbag module
- Corrosion or poor connection at the airbag deployment loop
- Malfunctioning crash sensor
- Impact from a previous collision that damaged the airbag system
Symptoms of B001E:0D
- Illumination of the airbag warning light on the dashboard
- Inability to turn off the airbag warning light even after resetting the system
- Diagnostic trouble code B001E:0D stored in the vehicle's computer system
- Loss of functionality of the driver seat inboard side airbag
How to Fix B001E:0D
- Begin by disconnecting the vehicle's battery to prevent accidental deployment of the airbag system.
- Inspect the wiring and connectors in the driver seat inboard side airbag deployment loop for any signs of damage or corrosion. Repair or replace any damaged components.
- Test the airbag module and crash sensor to determine if they are functioning correctly. Replace any faulty components.
- Clear the diagnostic trouble code from the vehicle's computer system and reset the airbag system.
- Reconnect the battery and test the airbag system to ensure that the issue has been resolved.
Cost to Fix B001E:0D
The cost of repairing a high resistance issue in the driver seat inboard side airbag deployment loop can vary depending on the specific cause of the problem and the make and model of the vehicle. Generally, the cost of parts for this repair can range from $200 to $500, while labor costs can range from $100 to $300. Overall, the total cost for this repair could be anywhere from $300 to $800. It's important to keep in mind that labor rates at auto repair shops can vary, so it's advisable to obtain quotes from multiple shops to ensure that you are getting a fair price for the repair.
Tech Notes for B001E:0D
B001E:02 Driver Seat Inboard Side Air Bag Deployment Loop Short to Ground
B001E:04 Driver Seat Inboard Side Air Bag Deployment Loop Open
B001E:0D Driver Seat Inboard Side Air Bag Deployment Loop High Resistance
B001E:0E Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance
Need more information about the B001E:0D code?
Need more information on how to fix the B001E:0D code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B001E:0D code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B001E:0D Code
1. What are common symptoms associated with OBDII code B001E:0D?
- The most common symptoms include an illuminated airbag warning light on the dashboard and a diagnostic trouble code indicating "Driver Seat Inboard Side Air Bag Deployment Loop High Resistance."
2. What could cause the B001E:0D code to trigger?
- This code is usually triggered by high resistance in the driver seat inboard side airbag deployment loop, potentially caused by damaged wiring, loose connections, or a faulty airbag module.
3. How serious is the B001E:0D code?
- The B001E:0D code indicates a potential issue with the driver seat airbag system, which could affect its proper deployment in case of an accident. It is essential to address this problem promptly to ensure the airbag system's effectiveness.
4. Can I continue driving with the B001E:0D code present?
- It is not recommended to drive with the B001E:0D code active, as it signifies a problem with the driver seat airbag system. Continuing to drive with this issue unresolved could compromise your safety in the event of a collision.
5. How can I diagnose the cause of the B001E:0D code?
- Diagnosing the B001E:0D code requires using a diagnostic scanner capable of reading airbag system codes. Additionally, a thorough inspection of the driver seat airbag wiring and connections is necessary to pinpoint the exact cause of the high resistance.
6. What are some repair tips for addressing the B001E:0D code?
- Repairing the B001E:0D code may involve checking and repairing any damaged wiring, securing loose connections, or replacing the driver seat airbag module if necessary. It is advisable to consult a professional technician for a proper diagnosis and repair.
7. Will resetting the OBDII system clear the B001E:0D code?
- While resetting the OBDII system may temporarily clear the B001E:0D code, it will likely reappear if the underlying issue with the driver seat airbag deployment loop's high resistance is not addressed.
8. How much does it typically cost to repair the B001E:0D code?
- The cost of repairing the B001E:0D code can vary depending on the extent of the damage and the specific repairs needed. It is advisable to obtain a diagnosis from a qualified technician to determine the exact cost of the repair.
Discuss the causes and fixes for B001E:0D OBDII Code
Code B001E:0D comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.