B001E:04 Code - Driver Seat Inboard Side Air Bag Deployment Loop Open
Quick Answer
The diagnostic trouble code B001E:04 indicates that there is an issue with the driver seat inboard side airbag deployment loop being open. Common causes include Faulty driver seat inboard side airbag deployment loop, Damaged wiring or connectors in the airbag circuit, Loose or corroded connections in the airbag system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B001E:04 indicates Driver Seat Inboard Side Air Bag Deployment Loop Open.
- Common causes
- Common causes include Faulty driver seat inboard side airbag deployment loop, Damaged wiring or connectors in the airbag circuit, Loose or corroded connections in the airbag system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B001E:04 Description
The diagnostic trouble code B001E:04 indicates that there is an issue with the driver seat inboard side airbag deployment loop being open. This means that there is a problem with the circuit that controls the deployment of the airbag located on the inboard side of the driver's seat. The airbag system is a crucial safety feature in modern vehicles, designed to deploy in the event of a collision to protect the driver from serious injury. When this circuit is open, it means that the airbag may not deploy properly in a crash, putting the driver at risk of more severe injuries.
Common Causes of B001E:04
- Faulty driver seat inboard side airbag deployment loop.
- Damaged wiring or connectors in the airbag circuit.
- Loose or corroded connections in the airbag system.
- Malfunctioning airbag control module.
- Impact or collision that caused damage to the airbag system components.
Symptoms of B001E:04
- Airbag warning light illuminated on the dashboard.
- Inability to reset the airbag warning light.
- Audible warning chime indicating an airbag system fault.
- Diagnostic trouble code B001E:04 stored in the vehicle's computer system.
How to Fix B001E:04
- Begin by conducting a thorough inspection of the driver seat inboard side airbag deployment loop, wiring, and connectors to identify any visible damage or issues.
- Test the airbag deployment loop and connectors using a multimeter to check for continuity and proper electrical connection.
- If a fault is found, repair or replace the damaged components as necessary, ensuring that all connections are secure and free of corrosion.
- Clear the diagnostic trouble code from the vehicle's computer system using a scan tool, and reset the airbag warning light on the dashboard.
- Perform a final test of the airbag system to ensure that the issue has been resolved and that the airbag will deploy properly in the event of a collision.
Cost to Fix B001E:04
The typical repair costs for addressing a driver seat inboard side airbag deployment loop open issue can vary depending on the extent of the damage and the specific components that need to be repaired or replaced. In general, the cost of parts for this repair can range from $200 to $500, with labor costs adding an additional $100 to $200. Overall, the total repair cost for this issue may fall between $300 and $700. It is important to note that these are rough estimates, and actual costs may vary based on factors such as location, vehicle make and model, and the specific repair shop's labor rates. It is advisable to consult with a qualified mechanic or repair shop to obtain a more accurate cost estimate for addressing this issue.
Tech Notes for B001E:04
B001E:02 Driver Seat Inboard Side Air Bag Deployment Loop Short to Ground
B001E:04 Driver Seat Inboard Side Air Bag Deployment Loop Open
B001E:0D Driver Seat Inboard Side Air Bag Deployment Loop High Resistance
B001E:0E Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance
Need more information about the B001E:04 code?
Need more information on how to fix the B001E:04 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B001E:04 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B001E:04 Code
What does OBDII code B001E:04 mean?
Code B001E:04 indicates an open circuit in the driver seat's inboard side airbag deployment loop, preventing proper airbag function.
What are common symptoms of code B001E:04?
Typical symptoms include the airbag warning light illuminated on the dashboard and potential deactivation of the driver seat inboard side airbag.
What causes code B001E:04?
Common causes include damaged wiring, loose or corroded electrical connectors, or a faulty airbag module.
Can I drive my car with code B001E:04?
It’s not recommended to drive with this code active, as it may compromise airbag deployment during an accident.
How do I diagnose the cause of code B001E:04?
Diagnosis typically involves inspecting wiring and connectors for damage, using a multimeter to check for continuity, and testing the airbag module.
Is code B001E:04 a serious issue?
Yes, this code indicates a fault in the airbag system, which is critical for occupant safety in a collision.
How can I repair code B001E:04?
Repairs may include fixing or replacing damaged wiring, cleaning or tightening electrical connections, or replacing the airbag module.
Can code B001E:04 be caused by an accident?
Yes, an accident can damage airbag components or wiring, potentially triggering this code.
Do I need special tools to fix code B001E:04?
Yes, tools like a multimeter, OBDII scanner, and potentially manufacturer-specific diagnostic equipment may be required.
Should I reset the code after repairs?
Yes, once repairs are completed, clear the code using an OBDII scanner to confirm the issue is resolved.
Discuss the causes and fixes for B001E:04 OBDII Code
Code B001E:04 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.