B001B:0E Code - Passenger Seat Belt Anchor Pretensioner Deployment Loop Low Resistance
Quick Answer
The B001B:0E diagnostic trouble code (DTC) indicates that there is low resistance in the passenger seat belt anchor pretensioner deployment loop. Common causes include Damaged wiring in the seat belt pretensioner system, Faulty connector in the deployment loop circuit, Corrosion in the connections of the pretensioner. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B001B:0E indicates Passenger Seat Belt Anchor Pretensioner Deployment Loop Low Resistance.
- Common causes
- Common causes include Damaged wiring in the seat belt pretensioner system, Faulty connector in the deployment loop circuit, Corrosion in the connections of the pretensioner.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B001B:0E Description
The B001B:0E diagnostic trouble code (DTC) indicates that there is low resistance in the passenger seat belt anchor pretensioner deployment loop. The seat belt pretensioner is a safety feature that activates in the event of a collision to tighten the seat belt and secure the occupant in place, reducing the risk of injury. When the resistance in the deployment loop is too low, it can prevent the pretensioner from functioning properly, compromising the safety of the passenger in the event of a crash.
Common Causes of B001B:0E
- Damaged wiring in the seat belt pretensioner system
- Faulty connector in the deployment loop circuit
- Corrosion in the connections of the pretensioner
- Malfunctioning seat belt pretensioner unit
- Impact or collision that damaged the pretensioner system
Symptoms of B001B:0E
- Airbag warning light illuminated on the dashboard
- Seat belt warning light flashing or staying on
- Audible warning chime when the vehicle is in motion
- Inability to fasten or tighten the seat belt properly
- Sudden or unexpected seat belt pretensioner deployment
How to Fix B001B:0E
- Diagnose the issue by using a scan tool to retrieve the DTC and inspecting the seat belt pretensioner system for visible damage.
- Check the wiring and connectors for any signs of damage, corrosion, or loose connections. Repair or replace any faulty components.
- Test the seat belt pretensioner unit to ensure it is functioning correctly. Replace the pretensioner if necessary.
- Clear the DTC from the vehicle's computer using a scan tool.
- Test the seat belt pretensioner system to verify that the issue has been resolved and that the pretensioner deploys correctly in a controlled environment.
Cost to Fix B001B:0E
The typical repair costs for addressing a B001B:0E code can vary depending on the specific components that need to be repaired or replaced. In general, the cost of parts for a seat belt pretensioner system repair can range from $100 to $500, while labor costs can add another $100 to $300 to the total bill. Overall, the total repair cost for this issue may fall between $200 and $800, but it's important to note that prices can vary significantly based on the vehicle make and model, the location of the repair shop, and the extent of the damage to the pretensioner system. It's advisable to consult with a qualified mechanic or repair shop for a more accurate estimate based on your specific situation.
Tech Notes for B001B:0E
B001B:02 Passenger Seat Belt Anchor Pretensioner Deployment Loop Short to Ground
B001B:04 Passenger Seat Belt Anchor Pretensioner Deployment Loop Open
B001B:0D Passenger Seat Belt Anchor Pretensioner Deployment Loop High Resistance
B001B:0E Passenger Seat Belt Anchor Pretensioner Deployment Loop Low Resistance
Need more information about the B001B:0E code?
Need more information on how to fix the B001B:0E code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B001B:0E code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B001B:0E Code
1. What does OBDII code B001B:0E mean?
The code B001B:0E indicates a low resistance issue in the passenger seat belt anchor pretensioner deployment loop.
2. What are the common symptoms of OBDII code B001B:0E?
Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the passenger seat belt pretensioner system.
3. What are the possible causes of OBDII code B001B:0E?
The code B001B:0E can be triggered by a faulty seat belt pretensioner, damaged wiring in the deployment loop, or a poor connection in the system.
4. How can I diagnose the OBDII code B001B:0E?
Diagnosing this code typically involves using a diagnostic scanner to read the code, inspecting the seat belt pretensioner system, and testing the wiring and connections for any faults.
5. Can I continue driving with the OBDII code B001B:0E present?
It is not recommended to drive with the B001B:0E code active, as it indicates a potential safety issue with the passenger seat belt pretensioner system.
6. How can I repair OBDII code B001B:0E?
Repairing the code may involve replacing the faulty seat belt pretensioner, repairing damaged wiring, or fixing any poor connections in the deployment loop system.
7. Is it safe to reset the OBDII code B001B:0E without fixing the issue?
Resetting the code without addressing the underlying problem may temporarily turn off the warning light, but the safety issue with the seat belt pretensioner system will remain unresolved.
8. Can I repair OBDII code B001B:0E myself?
While some DIY enthusiasts may attempt to diagnose and repair this code, it is recommended to have a professional technician handle the repair due to the safety implications of the seat belt pretensioner system.
9. How much does it cost to repair OBDII code B001B:0E?
The cost of repairing the B001B:0E code can vary depending on the specific issue, parts needed, and labor costs. It is advisable to obtain quotes from reputable automotive repair shops.
10. Can OBDII code B001B:0E affect the overall safety of the vehicle?
Yes, unresolved issues related to the passenger seat belt pretensioner system indicated by the B001B:0E code can compromise the overall safety of the vehicle, especially in the event of a collision.
Discuss the causes and fixes for B001B:0E OBDII Code
Code B001B:0E comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.