B001B:04 Code - Passenger Seat Belt Anchor Pretensioner Deployment Loop Open
Quick Answer
The B001B:04 diagnostic trouble code (DTC) indicates that there is an issue with the passenger seat belt anchor pretensioner deployment loop being open. Common causes include Faulty seat belt pretensioner deployment loop, Wiring issues or electrical connection problems, Impact or collision that triggered the pretensioner deployment. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B001B:04 indicates Passenger Seat Belt Anchor Pretensioner Deployment Loop Open.
- Common causes
- Common causes include Faulty seat belt pretensioner deployment loop, Wiring issues or electrical connection problems, Impact or collision that triggered the pretensioner deployment.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B001B:04 Description
The B001B:04 diagnostic trouble code (DTC) indicates that there is an issue with the passenger seat belt anchor pretensioner deployment loop being open. In simpler terms, this means that the system responsible for tightening the seat belt in the event of a collision is not functioning properly. The seat belt pretensioner is a safety feature designed to remove slack from the seat belt and secure the occupant in their seat during a crash, reducing the risk of injury.
Common Causes of B001B:04
- Faulty seat belt pretensioner deployment loop.
- Wiring issues or electrical connection problems.
- Impact or collision that triggered the pretensioner deployment.
- Corrosion or damage to the seat belt anchor point.
- Defective seat belt buckle or latch.
Symptoms of B001B:04
- Airbag warning light illuminated on the dashboard.
- Seat belt warning light flashing or staying on.
- Audible warning chime indicating a seat belt issue.
- Seat belt not retracting properly.
- Increased slack in the seat belt.
How to Fix B001B:04
- Diagnose the issue by using a scan tool to retrieve the DTC and inspecting the seat belt pretensioner system for any visible damage.
- Check the wiring and electrical connections for any loose connections or damage. Repair or replace as needed.
- Replace the faulty seat belt pretensioner deployment loop with a new one.
- Clear the DTC from the vehicle's memory using a scan tool.
- Test the seat belt pretensioner system to ensure proper functionality.
Cost to Fix B001B:04
The cost of repairing a passenger seat belt anchor pretensioner deployment loop open issue can vary depending on the make and model of the vehicle, as well as the labor rates in your area. On average, the parts for this repair can range from $100 to $300, while the labor costs can range from $100 to $200. Overall, you can expect to pay anywhere from $200 to $500 for this repair. It's recommended to consult with a professional mechanic or service center for an accurate estimate tailored to your specific vehicle.
Tech Notes for B001B:04
B001B:02 Passenger Seat Belt Anchor Pretensioner Deployment Loop Short to Ground
B001B:04 Passenger Seat Belt Anchor Pretensioner Deployment Loop Open
B001B:0D Passenger Seat Belt Anchor Pretensioner Deployment Loop High Resistance
B001B:0E Passenger Seat Belt Anchor Pretensioner Deployment Loop Low Resistance
Need more information about the B001B:04 code?
Need more information on how to fix the B001B:04 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B001B:04 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B001B:04 Code
1. What are the common symptoms of OBDII code B001B:04?
The common symptoms of this code include the airbag warning light illuminating on the dashboard and a potential message indicating an issue with the passenger seat belt pretensioner.
2. What does the OBDII code B001B:04 indicate?
OBDII code B001B:04 indicates that there is an open circuit in the deployment loop of the passenger seat belt anchor pretensioner.
3. What are the possible causes of OBDII code B001B:04?
The possible causes of this code include a faulty seat belt pretensioner, damaged wiring, poor connections, or a defective airbag control module.
4. How can I diagnose the issue related to OBDII code B001B:04?
To diagnose the problem, you may need to perform a visual inspection of the seat belt pretensioner and its wiring, check for loose connections, and use an OBDII scanner to retrieve and analyze the fault codes.
5. Is it safe to drive with OBDII code B001B:04 present?
It is not recommended to drive with this code present, as it indicates a potential issue with the passenger seat belt pretensioner, which is a crucial safety component in the event of a collision.
6. Can I reset OBDII code B001B:04 without fixing the underlying issue?
Simply resetting the code without addressing the underlying problem will not resolve the issue. It is important to diagnose and repair the cause of the code to ensure the safety systems function properly.
7. How can I repair OBDII code B001B:04?
Repairing this code may involve replacing the faulty seat belt pretensioner, repairing damaged wiring or connectors, or resetting the airbag control module after the issue has been resolved.
8. Do I need special tools to fix OBDII code B001B:04?
Depending on the exact cause of the code, you may need basic hand tools, a multimeter for testing circuits, and potentially an OBDII scanner to reset the code after repairs have been completed.
9. Is it possible to fix OBDII code B001B:04 at home, or should I take it to a professional mechanic?
While some DIY enthusiasts may be able to diagnose and repair this code at home, it is recommended to seek the assistance of a professional mechanic, especially when dealing with safety-related systems like airbags and seat belts.
10. What are the potential risks of ignoring OBDII code B001B:04?
Ignoring this code could result in the passenger seat belt pretensioner not deploying properly in the event of a collision, potentially leading to increased risk of injury for the occupant.
Discuss the causes and fixes for B001B:04 OBDII Code
Code B001B:04 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.