B001B:01 Code - Passenger Seat Belt Anchor Pretensioner Deployment Loop Short to Battery
Quick Answer
The B001B:01 diagnostic trouble code (DTC) indicates that there is a short to battery in the passenger seat belt anchor pretensioner deployment loop. Common causes include Short circuit in the wiring harness, Faulty seat belt pretensioner, Corrosion or damage to the connectors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B001B:01 indicates Passenger Seat Belt Anchor Pretensioner Deployment Loop Short to Battery.
- Common causes
- Common causes include Short circuit in the wiring harness, Faulty seat belt pretensioner, Corrosion or damage to the connectors.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B001B:01 Description
The B001B:01 diagnostic trouble code (DTC) indicates that there is a short to battery in the passenger seat belt anchor pretensioner deployment loop. The pretensioner is a safety feature in modern vehicles that activates during a collision, tightening the seat belt to secure the occupant in place. In the event of a crash, the pretensioner is triggered by the airbag control module to reduce the slack in the seat belt and minimize the forward movement of the occupant.
Common Causes of B001B:01
- Short circuit in the wiring harness
- Faulty seat belt pretensioner
- Corrosion or damage to the connectors
- Issues with the airbag control module
- Vehicle collision or impact
Symptoms of B001B:01
- Airbag warning light illuminated on the dashboard
- Seat belt warning light stays on
- Seat belt pretensioner does not engage during a collision
- Audible warning chime when the vehicle is in motion
How to Fix B001B:01
- Diagnose the exact cause of the short to battery in the passenger seat belt anchor pretensioner deployment loop using a diagnostic scan tool.
- Inspect the wiring harness for any visible signs of damage, such as fraying or exposed wires. Repair or replace any damaged wires.
- Check the connectors for corrosion or loose connections. Clean or replace the connectors as needed.
- Test the seat belt pretensioner to ensure it is functioning properly. Replace the pretensioner if it is found to be faulty.
- Clear the DTC from the vehicle's memory using the diagnostic scan tool and perform a final test to verify that the issue has been resolved.
Cost to Fix B001B:01
The typical repair costs for addressing a B001B:01 code can vary depending on the extent of the damage and the specific components that need to be replaced. In general, the cost of parts for a seat belt pretensioner can range from $100 to $300, while the labor cost can be anywhere from $100 to $200. Therefore, the total repair cost could be in the range of $200 to $500. However, it is important to note that these are rough estimates, and actual costs may vary based on the vehicle make and model, the location of the repair shop, and any additional issues that may be discovered during the repair process. It is recommended to consult with a professional mechanic for a more accurate cost estimate.
Tech Notes for B001B:01
B001B:02 Passenger Seat Belt Anchor Pretensioner Deployment Loop Short to Ground
B001B:04 Passenger Seat Belt Anchor Pretensioner Deployment Loop Open
B001B:0D Passenger Seat Belt Anchor Pretensioner Deployment Loop High Resistance
B001B:0E Passenger Seat Belt Anchor Pretensioner Deployment Loop Low Resistance
Need more information about the B001B:01 code?
Need more information on how to fix the B001B:01 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B001B:01 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B001B:01 Code
What does the OBDII code B001B:01 mean?
Code B001B:01 indicates a short to battery in the deployment loop circuit for the passenger seat belt anchor pretensioner.
What are common symptoms of code B001B:01?
Symptoms may include an illuminated airbag or SRS warning light on the dashboard and the potential non-deployment of the seat belt pretensioner during a collision.
What causes code B001B:01?
Common causes include damaged wiring, a short circuit in the passenger seat belt pretensioner system, or a faulty pretensioner component.
Can I drive my car with code B001B:01?
It is not recommended to drive with this code, as it may indicate a fault in the safety restraint system, potentially compromising passenger safety in an accident.
How is code B001B:01 diagnosed?
A technician will use a scan tool to retrieve the code, inspect the wiring and connectors for damage, and test the pretensioner circuit for continuity and shorts.
What tools are needed to repair code B001B:01?
Tools may include a multimeter for testing electrical circuits, a scan tool for clearing codes, and replacement wiring or pretensioner components as needed.
Can I fix code B001B:01 myself?
Repairing this code yourself is not recommended unless you have experience with automotive electrical systems, as improper handling could trigger the airbag system.
How much does it cost to repair code B001B:01?
Repair costs vary but may range from $100 to $500 depending on whether the issue is wiring-related or requires pretensioner replacement.
Can a faulty passenger seat belt pretensioner cause code B001B:01?
Yes, a defective pretensioner can cause this code if it creates a short circuit to the battery.
Will clearing the code fix the problem?
Clearing the code will not fix the underlying issue; the cause of the short circuit must be identified and repaired before the code can be permanently resolved.
Discuss the causes and fixes for B001B:01 OBDII Code
Code B001B:01 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.