B0019 2016 GMC Sierra Code - Passenger Instrument Panel Air Bag Deployment Loop Stage 1
Quick Answer
The B0019 diagnostic trouble code (DTC) for a 2016 GMC Sierra relates to the Passenger Instrument Panel Air Bag Deployment Loop Stage 1. Common causes include Faulty passenger side airbag module, Loose or damaged wiring in the airbag deployment loop, Malfunctioning crash sensors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0019 2016 GMC Sierra indicates Passenger Instrument Panel Air Bag Deployment Loop Stage 1.
- Common causes
- Common causes include Faulty passenger side airbag module, Loose or damaged wiring in the airbag deployment loop, Malfunctioning crash sensors.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0019 2016 GMC Sierra Description
The B0019 diagnostic trouble code (DTC) for a 2016 GMC Sierra relates to the Passenger Instrument Panel Air Bag Deployment Loop Stage 1. This code indicates a problem with the airbag system in the vehicle, specifically in the passenger side instrument panel airbag deployment loop. The airbag system is a crucial safety feature designed to deploy in the event of a collision to protect occupants from serious injury. When this code is triggered, it means that there is a malfunction or fault in the deployment loop, which could prevent the airbag from deploying properly in a crash.
Common Causes of B0019 2016 GMC Sierra
- Faulty passenger side airbag module.
- Loose or damaged wiring in the airbag deployment loop.
- Malfunctioning crash sensors.
- Corrosion or damage to connectors in the airbag system.
- Software issues in the vehicle's airbag control module.
Symptoms of B0019 2016 GMC Sierra
- Airbag warning light illuminated on the dashboard.
- Diagnostic trouble code (DTC) stored in the vehicle's computer system.
- Inability to reset the airbag warning light.
- Passenger side airbag may not deploy in a collision.
How to Fix B0019 2016 GMC Sierra
- Begin by diagnosing the specific cause of the B0019 code using a scan tool to read the DTC and identify the issue.
- Inspect the passenger side airbag module, wiring, and connectors for any visible damage or corrosion.
- Test the crash sensors to ensure they are functioning properly.
- Repair or replace any faulty components identified during the diagnostic process.
- Clear the DTC from the vehicle's computer system and test the airbag system to ensure proper functionality.
Cost to Fix B0019 2016 GMC Sierra
The cost of repairing a B0019 code on a 2016 GMC Sierra can vary depending on the specific cause of the issue and the extent of the repairs needed. In general, the cost of parts for this repair can range from $200 to $600, with labor costs adding an additional $100 to $300. Overall, the total cost of addressing this issue could range from $300 to $900. It's important to note that labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate based on your location and vehicle specifics.
Tech Notes for B0019 2016 GMC Sierra
B0019:02 Passenger Instrument Panel Air Bag Deployment Loop Stage 1 Short to Ground
B0019:04 Passenger Instrument Panel Air Bag Deployment Loop Stage 1 Open
B0019:0D Passenger Instrument Panel Air Bag Deployment Loop Stage 1 High Resistance
B0019:0E Passenger Instrument Panel Air Bag Deployment Loop Stage 1 Low Resistance
Need more information about the B0019 2016 GMC Sierra code?
Need more information on how to fix the B0019 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0019 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0019 2016 GMC Sierra Code
1. What does OBDII code B0019 in a 2016 GMC Sierra indicate?
- OBDII code B0019 for a 2016 GMC Sierra refers to an issue with the Passenger Instrument Panel Air Bag Deployment Loop Stage 1.
2. What are common symptoms of OBDII code B0019 in a 2016 GMC Sierra?
- Common symptoms include the airbag warning light illuminating on the dashboard and a potential message indicating an issue with the passenger airbag system.
3. What are possible causes of OBDII code B0019 in a 2016 GMC Sierra?
- Causes of code B0019 can include a faulty passenger airbag deployment loop, wiring issues, a malfunctioning airbag control module, or a problem with the passenger presence detection system.
4. How can I diagnose OBDII code B0019 in my 2016 GMC Sierra?
- Diagnosing code B0019 typically involves using a diagnostic scanner to retrieve the specific fault code, followed by inspecting the airbag system components, wiring, and connections for any visible damage or issues.
5. Can I still drive my 2016 GMC Sierra with OBDII code B0019?
- It is not recommended to drive the vehicle with an active airbag fault code like B0019, as it could compromise the proper function of the passenger airbag system in the event of a collision.
6. How can I repair OBDII code B0019 in my 2016 GMC Sierra?
- Repairing code B0019 may involve replacing the faulty passenger airbag deployment loop, repairing damaged wiring, resetting the airbag control module, or addressing any issues with the passenger presence detection system.
7. Is it safe to reset the OBDII code B0019 in a 2016 GMC Sierra without fixing the underlying issue?
- It is not recommended to simply reset the code without addressing the root cause, as the airbag system may still be compromised and fail to deploy properly in an emergency situation.
8. Can a DIY enthusiast fix OBDII code B0019 in a 2016 GMC Sierra?
- While some basic troubleshooting and repairs can be done by DIY enthusiasts, dealing with airbag systems can be complex and dangerous. It's best to consult a professional technician for proper diagnosis and repair.
9. How much does it typically cost to repair OBDII code B0019 in a 2016 GMC Sierra?
- The cost of repairing code B0019 can vary depending on the specific issue causing the fault, the required parts, and labor costs. It's advisable to get a diagnostic assessment from a qualified mechanic for an accurate estimate.
10. Will fixing OBDII code B0019 in my 2016 GMC Sierra turn off the airbag warning light?
- Once the underlying issue causing code B0019 is successfully repaired, the airbag warning light should reset itself after a few driving cycles. If it persists, further diagnosis may be needed.
Discuss the causes and fixes for B0019 2016 GMC Sierra OBDII Code
Code B0019 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.