B0014 2017 GMC Sierra Code - Driver Seat Side Air Bag Deployment Loop
Quick Answer
The B0014 code for a 2017 GMC Sierra specifically relates to the driver seat side airbag deployment loop. Common causes include Loose or corroded wiring connections in the deployment loop circuit, Damage to the wiring harness that connects to the driver's side airbag, A malfunctioning airbag sensor or module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0014 2017 GMC Sierra indicates Driver Seat Side Air Bag Deployment Loop.
- Common causes
- Common causes include Loose or corroded wiring connections in the deployment loop circuit, Damage to the wiring harness that connects to the driver's side airbag, A malfunctioning airbag sensor or module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0014 2017 GMC Sierra Description
The B0014 code for a 2017 GMC Sierra specifically relates to the driver seat side airbag deployment loop. This code indicates a problem with the circuit that controls the deployment of the driver's side airbag in the event of a collision. The deployment loop is a crucial component of the vehicle's safety system, as it ensures that the airbag is activated when needed to protect the driver in the event of a crash.
Common Causes of B0014 2017 GMC Sierra
- Loose or corroded wiring connections in the deployment loop circuit.
- Damage to the wiring harness that connects to the driver's side airbag.
- A malfunctioning airbag sensor or module.
- Faulty deployment loop circuit components.
- Impact or damage to the driver's side airbag system in a previous collision.
Symptoms of B0014 2017 GMC Sierra
- The airbag warning light on the dashboard may illuminate.
- The driver's side airbag may fail to deploy in a crash.
- The vehicle may fail an airbag system diagnostic test.
- The vehicle may display a message indicating an airbag system fault.
How to Fix B0014 2017 GMC Sierra
- Begin by diagnosing the specific cause of the B0014 code using a diagnostic scanner to pinpoint the exact issue.
- Inspect the wiring connections in the deployment loop circuit for any signs of damage or corrosion, and repair or replace as needed.
- Check the wiring harness for the driver's side airbag for any damage and repair or replace as necessary.
- Test the airbag sensor and module for proper functioning, replacing any faulty components.
- Clear the B0014 code from the vehicle's computer system and perform a test to ensure that the driver's side airbag deploys correctly.
Cost to Fix B0014 2017 GMC Sierra
The typical repair costs for addressing a B0014 code on a 2017 GMC Sierra can vary depending on the specific cause of the issue. In general, the cost of parts for this repair could range from $100 to $500, while labor costs could range from $150 to $300. It's important to note that these are rough estimates, and actual costs may vary based on factors such as location, vehicle make and model, and the extent of the repairs needed. Additionally, diagnostic time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate.
Tech Notes for B0014 2017 GMC Sierra
B0014:02 Driver Seat Side Air Bag Deployment Loop Short to Ground
B0014:04 Driver Seat Side Air Bag Deployment Loop Open
B0014:0D Driver Seat Side Air Bag Deployment Loop High Resistance
B0014:0E Driver Seat Side Air Bag Deployment Loop Low Resistance
Need more information about the B0014 2017 GMC Sierra code?
Need more information on how to fix the B0014 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0014 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0014 2017 GMC Sierra Code
1. What does OBDII code B0014 for a 2017 GMC Sierra mean?
This code indicates an issue with the Driver Seat Side Air Bag Deployment Loop.
2. What are the common symptoms of OBDII code B0014 in a 2017 GMC Sierra?
Common symptoms include the airbag warning light on the dashboard remaining illuminated and potential non-deployment of the driver seat side airbag during an accident.
3. What are some possible causes of OBDII code B0014 in a 2017 GMC Sierra?
Potential causes include a faulty driver seat side airbag deployment loop, damaged wiring or connectors, or a problem with the airbag control module.
4. How can I diagnose the issue related to OBDII code B0014 in my 2017 GMC Sierra?
Diagnosing the problem may require using a professional OBDII scanner to retrieve the specific error codes and conducting a thorough inspection of the driver seat side airbag system.
5. Can I continue driving my 2017 GMC Sierra with OBDII code B0014 present?
It is not recommended to drive the vehicle with a known airbag issue, as it may compromise safety in the event of an accident. Prompt attention and repair are advised.
6. What are the repair options for fixing OBDII code B0014 in a 2017 GMC Sierra?
Repair options may include replacing the faulty driver seat side airbag deployment loop, repairing damaged wiring or connectors, or resetting the airbag control module after addressing the underlying issue.
7. Is it safe to attempt DIY repairs for OBDII code B0014 in a 2017 GMC Sierra?
Due to the safety implications of airbag systems, it is recommended to have repairs related to OBDII code B0014 performed by a qualified technician with experience in handling airbag systems.
8. How much does it typically cost to repair OBDII code B0014 in a 2017 GMC Sierra?
Repair costs can vary depending on the specific underlying issue, parts required, and labor rates. It is advisable to obtain a diagnosis and repair estimate from a reputable auto repair shop.
9. Are there any recalls or service bulletins related to OBDII code B0014 in a 2017 GMC Sierra?
It is recommended to check with a GMC dealership or the National Highway Traffic Safety Administration (NHTSA) website for any related recalls or service bulletins concerning this OBDII code.
10. How important is it to address OBDII code B0014 promptly in a 2017 GMC Sierra?
Prompt attention to OBDII code B0014 is crucial, as it directly affects the proper functioning of the driver seat side airbag system, which is a critical safety feature in the event of a collision.
Discuss the causes and fixes for B0014 2017 GMC Sierra OBDII Code
Code B0014 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.