B0014:0D Code - Driver Seat Side Air Bag Deployment Loop High Resistance
Quick Answer
The B0014:0D diagnostic trouble code indicates that there is a high resistance in the driver seat side airbag deployment loop. Common causes include Loose or corroded wiring connections in the deployment loop, Damaged wiring harness or connectors, Faulty airbag module or impact sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0014:0D indicates Driver Seat Side Air Bag Deployment Loop High Resistance.
- Common causes
- Common causes include Loose or corroded wiring connections in the deployment loop, Damaged wiring harness or connectors, Faulty airbag module or impact sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0014:0D Description
The B0014:0D diagnostic trouble code indicates that there is a high resistance in the driver seat side airbag deployment loop. This system is a crucial safety feature designed to deploy the side airbag in the event of a collision or impact from the side of the vehicle. The high resistance in the deployment loop can prevent the airbag from deploying properly or at all, increasing the risk of injury to the driver in the event of a side impact.
Common Causes of B0014:0D
- Loose or corroded wiring connections in the deployment loop.
- Damaged wiring harness or connectors.
- Faulty airbag module or impact sensor.
- Manufacturing defects in the components of the deployment loop.
- Wear and tear over time leading to degradation of the circuit.
Symptoms of B0014:0D
- Airbag warning light illuminated on the dashboard.
- Inability to turn off the airbag warning light even after resetting.
- Diagnostic trouble code B0014:0D stored in the vehicle's computer system.
- Failure of the driver seat side airbag to deploy during a crash test.
How to Fix B0014:0D
- Diagnose the issue by using a scan tool to retrieve the specific trouble code and pinpoint the location of the high resistance.
- Inspect the wiring harness, connectors, and airbag module for any signs of damage or corrosion.
- Repair or replace any damaged components, such as wiring or connectors, in the deployment loop.
- Clear the trouble code from the vehicle's computer system and test the driver seat side airbag deployment system to ensure proper functionality.
- Perform a final inspection and reset any remaining fault codes to complete the repair process.
Cost to Fix B0014:0D
The typical repair costs for addressing a high resistance in the driver seat side airbag deployment loop can range from $200 to $500, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's advisable to check local rates for a more precise estimate. Keep in mind that rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less.
Tech Notes for B0014:0D
B0014:02 Driver Seat Side Air Bag Deployment Loop Short to Ground
B0014:04 Driver Seat Side Air Bag Deployment Loop Open
B0014:0D Driver Seat Side Air Bag Deployment Loop High Resistance
B0014:0E Driver Seat Side Air Bag Deployment Loop Low Resistance
Need more information about the B0014:0D code?
Need more information on how to fix the B0014:0D code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0014:0D code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0014:0D Code
1. What are the common symptoms of OBDII code B0014:0D (Driver Seat Side Air Bag Deployment Loop High Resistance)?
- Common symptoms include the airbag warning light illuminating on the dashboard and potential non-deployment of the driver seat side airbag during a collision.
2. What are the possible causes of OBDII code B0014:0D?
- The code B0014:0D typically indicates high resistance in the driver seat side airbag deployment loop, which can be caused by issues such as a faulty airbag module, damaged wiring, or a defective seat side airbag.
3. How serious is OBDII code B0014:0D (Driver Seat Side Air Bag Deployment Loop High Resistance)?
- This code is considered serious because it signifies a potential problem with the driver seat side airbag system, which may affect its proper deployment in the event of a collision.
4. Can I continue driving with OBDII code B0014:0D present?
- It is not recommended to drive with the OBDII code B0014:0D active, as it indicates a fault in the driver seat side airbag system that could compromise safety in the event of an accident.
5. How can I diagnose and repair OBDII code B0014:0D?
- Diagnosis involves using a scan tool to retrieve the specific fault code, followed by inspecting the driver seat side airbag system for issues like damaged wiring, a faulty airbag module, or a defective side airbag. Repair typically involves replacing the damaged components and clearing the code.
6. Are there any DIY repair tips for OBDII code B0014:0D?
- DIY repair for OBDII code B0014:0D may involve checking and repairing any visible wiring damage in the driver seat side airbag system. However, due to the critical nature of airbag systems, it is recommended to have the repair done by a professional.
7. How much does it cost to fix OBDII code B0014:0D?
- The cost of fixing OBDII code B0014:0D can vary depending on the specific cause of the issue and the labor rates in your area. It may involve replacing components like the airbag module, wiring harness, or the driver seat side airbag itself.
8. Can resetting the OBDII code B0014:0D fix the issue?
- Simply resetting the code without addressing the underlying cause, such as high resistance in the driver seat side airbag deployment loop, is unlikely to fix the issue permanently. It is important to diagnose and repair the root cause of the problem.
9. What should I do if OBDII code B0014:0D keeps coming back after repair?
- If the code B0014:0D keeps reoccurring after repair, it indicates that the issue with the driver seat side airbag system has not been fully resolved. It is advisable to reinspect the system for any missed faults or have a professional diagnose the problem.
10. Is it safe to drive if the driver seat side airbag is not functioning due to OBDII code B0014:0D?
- It is not recommended to drive without a properly functioning driver seat side airbag, as it is a critical safety feature designed to protect you in the event of a side impact collision. It is important to have the issue diagnosed and repaired promptly.
Discuss the causes and fixes for B0014:0D OBDII Code
Code B0014:0D comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.