B0013 2017 GMC Sierra Code - Driver Steering Wheel Air Bag Deployment Loop Stage 2
Quick Answer
The B0013 diagnostic trouble code (DTC) for a 2017 GMC Sierra relates to the Driver Steering Wheel Air Bag Deployment Loop Stage 2. Common causes include Faulty wiring or connectors in the stage 2 circuit, Damaged or corroded connectors in the airbag deployment loop, Malfunctioning airbag control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0013 2017 GMC Sierra indicates Driver Steering Wheel Air Bag Deployment Loop Stage 2.
- Common causes
- Common causes include Faulty wiring or connectors in the stage 2 circuit, Damaged or corroded connectors in the airbag deployment loop, Malfunctioning airbag control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0013 2017 GMC Sierra Description
The B0013 diagnostic trouble code (DTC) for a 2017 GMC Sierra relates to the Driver Steering Wheel Air Bag Deployment Loop Stage 2. This code indicates a problem with the stage 2 circuit in the driver's steering wheel airbag deployment loop. The airbag system is a crucial safety feature in modern vehicles, designed to protect occupants in the event of a collision by deploying airbags to cushion the impact.
Common Causes of B0013 2017 GMC Sierra
- Faulty wiring or connectors in the stage 2 circuit
- Damaged or corroded connectors in the airbag deployment loop
- Malfunctioning airbag control module
- Impact or collision that triggers the airbag deployment system
Symptoms of B0013 2017 GMC Sierra
- Illuminated airbag warning light on the dashboard
- Inoperative horn or cruise control buttons on the steering wheel
- Intermittent loss of communication with the airbag control module
- Failure of the driver's airbag to deploy in a collision
How to Fix B0013 2017 GMC Sierra
- Diagnose the issue using a professional automotive diagnostic scanner to retrieve the specific fault codes.
- Inspect the wiring, connectors, and components in the driver's airbag deployment loop for any signs of damage or corrosion.
- Repair or replace any faulty wiring or connectors in the stage 2 circuit.
- Test the airbag system to ensure proper functionality and reset the airbag control module to clear the fault codes.
- Verify that the airbag warning light is no longer illuminated and that the airbag system is functioning correctly.
Cost to Fix B0013 2017 GMC Sierra
The typical repair costs for addressing a B0013 code in a 2017 GMC Sierra can vary depending on the extent of the issue and the required repairs. In general, the cost of parts such as wiring, connectors, or an airbag control module can range from $200 to $500. Labor costs at an auto repair shop may add an additional $100 to $300 to the total bill. Overall, the total repair cost for resolving a B0013 code could be in the range of $300 to $800. It is important to note that the specific diagnosis time and labor rates at auto repair shops can vary based on location, vehicle make and model, and other factors. It is advisable to consult with a trusted mechanic or dealership for a more accurate estimate based on your specific situation.
Tech Notes for B0013 2017 GMC Sierra
B0013:02 Driver Frontal Deployment Loop Stage 2 Short to Ground
B0013:04 Driver Frontal Deployment Loop Stage 2 Open Circuit
B0013:0D Driver Frontal Deployment Loop Stage 2 High Resistance
B0013:0E Driver Frontal Deployment Loop Stage 2 Low Resistance
Need more information about the B0013 2017 GMC Sierra code?
Need more information on how to fix the B0013 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0013 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0013 2017 GMC Sierra Code
1. What are common symptoms of OBDII code B0013 in a 2017 GMC Sierra?
The common symptoms of OBDII code B0013 in a 2017 GMC Sierra include the airbag warning light illuminating on the dashboard and a potential message indicating an issue with the driver steering wheel airbag deployment loop stage 2.
2. What does code B0013 mean for a 2017 GMC Sierra?
OBDII code B0013 for a 2017 GMC Sierra specifically refers to a problem with the driver steering wheel airbag deployment loop stage 2. This indicates an issue with the driver's airbag system.
3. What are possible causes of OBDII code B0013 in a 2017 GMC Sierra?
Possible causes of OBDII code B0013 in a 2017 GMC Sierra include a faulty driver airbag deployment loop, a loose connection in the airbag system, or a malfunctioning airbag control module.
4. How can I diagnose OBDII code B0013 in my 2017 GMC Sierra?
To diagnose OBDII code B0013 in a 2017 GMC Sierra, you may need to use a diagnostic scanner to retrieve the specific trouble code. Additionally, visually inspecting the airbag system components and checking for loose connections can help pinpoint the issue.
5. Is it safe to drive my 2017 GMC Sierra with OBDII code B0013?
It is not recommended to drive your 2017 GMC Sierra with OBDII code B0013, as this indicates a potential problem with the driver's airbag system. It is crucial to address airbag issues promptly to ensure the safety features function correctly in the event of an accident.
6. Can I repair OBDII code B0013 in my 2017 GMC Sierra myself?
Repairing OBDII code B0013 in a 2017 GMC Sierra may require specialized knowledge and tools. It is advisable to consult a professional mechanic or authorized dealership to accurately diagnose and repair the driver steering wheel airbag deployment loop stage 2 issue.
7. How much does it typically cost to fix OBDII code B0013 in a 2017 GMC Sierra?
The cost of fixing OBDII code B0013 in a 2017 GMC Sierra can vary depending on the specific cause of the issue. Costs may include parts replacement, labor charges, and diagnostic fees. It is best to obtain a quote from a trusted mechanic for an accurate estimate.
8. Can resetting the OBDII system clear code B0013 in my 2017 GMC Sierra?
Resetting the OBDII system may temporarily clear code B0013 in a 2017 GMC Sierra, but if the underlying issue with the driver steering wheel airbag deployment loop stage 2 is not addressed, the code is likely to reappear. It is crucial to diagnose and fix the root cause of the problem.
9. How important is it to fix OBDII code B0013 in a 2017 GMC Sierra?
Fixing OBDII code B0013 in a 2017 GMC Sierra is crucial for ensuring the proper function of the driver's airbag system. Airbags are a critical safety feature in vehicles, and addressing any issues promptly is essential to maintain occupant safety in the event of a collision.
10. Are there any recalls or technical service bulletins related to OBDII code B0013 in a 2017 GMC Sierra?
Recalls or technical service bulletins related to OBDII code B0013 in a 2017 GMC Sierra may exist. It is advisable to check with the manufacturer, GMC, or authorized dealerships for any relevant information regarding recalls or service bulletins related to this specific OBDII code.
Discuss the causes and fixes for B0013 2017 GMC Sierra OBDII Code
Code B0013 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.