Engine-Codes.com
Engine-Codes – GMC – B0013 2016 GMC Sierra

B0013 2016 GMC Sierra Code - Driver Steering Wheel Air Bag Deployment Loop Stage 2

Quick Answer

The B0013 diagnostic trouble code (DTC) for a 2016 GMC Sierra specifically relates to the Driver Steering Wheel Air Bag Deployment Loop Stage 2. Common causes include Faulty driver's airbag module, Damaged wiring or connectors in the airbag system, Malfunctioning crash sensors or impact sensors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B0013 2016 GMC Sierra indicates Driver Steering Wheel Air Bag Deployment Loop Stage 2.
Common causes
Common causes include Faulty driver's airbag module, Damaged wiring or connectors in the airbag system, Malfunctioning crash sensors or impact sensors.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 11, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B0013 2016 GMC Sierra Description

The B0013 diagnostic trouble code (DTC) for a 2016 GMC Sierra specifically relates to the Driver Steering Wheel Air Bag Deployment Loop Stage 2. This code indicates a problem with the deployment loop stage 2 of the driver's steering wheel airbag system. The deployment loop stage 2 is a critical component of the airbag system that ensures the timely and proper deployment of the airbag in the event of a collision or impact.

OBDII Code B0013 2016 GMC Sierra - Driver Steering Wheel Air Bag Deployment Loop Stage 2
B0013 2016 GMC Sierra Code - Driver Steering Wheel Air Bag Deployment Loop Stage 2

Common Causes of B0013 2016 GMC Sierra

  1. Faulty driver's airbag module
  2. Damaged wiring or connectors in the airbag system
  3. Malfunctioning crash sensors or impact sensors
  4. Issues with the clockspring in the steering wheel
  5. Corrosion or moisture in the airbag system components

Symptoms of B0013 2016 GMC Sierra

  1. Illumination of the airbag warning light on the instrument panel
  2. Inability to reset the airbag warning light after clearing the code
  3. Intermittent or non-functioning horn or cruise control buttons on the steering wheel
  4. The airbag system may fail to deploy in a collision
  5. Diagnostic trouble codes related to the airbag system stored in the vehicle's computer

How to Fix B0013 2016 GMC Sierra

  1. Begin by diagnosing the specific cause of the B0013 code using a professional-grade scan tool to retrieve and interpret the fault codes stored in the vehicle's computer.
  2. Inspect the wiring, connectors, and components related to the driver's airbag system for any visible damage or corrosion.
  3. Test the driver's airbag module, crash sensors, and clockspring for proper functionality to determine if any components need to be replaced.
  4. Replace any faulty components identified during the diagnostic process, ensuring that all connections are secure and properly installed.
  5. Clear the DTC codes from the vehicle's computer and perform a test drive to verify that the issue has been resolved and that the airbag system is functioning correctly.

Cost to Fix B0013 2016 GMC Sierra

The cost of repairing a B0013 code for a 2016 GMC Sierra can vary depending on the specific cause of the issue and the labor rates of the auto repair shop. In general, the cost of parts for this repair can range from $200 to $500, with additional labor costs ranging from $100 to $300. However, it's important to note that these are rough estimates, and actual costs may vary based on factors such as location, parts availability, and the shop's hourly labor rates.

What does this mean?

Tech Notes for B0013 2016 GMC Sierra

B0013:01 Driver Frontal Deployment Loop Stage 2 Short to Battery

B0013:02 Driver Frontal Deployment Loop Stage 2 Short to Ground

B0013:04 Driver Frontal Deployment Loop Stage 2 Open Circuit

B0013:0D Driver Frontal Deployment Loop Stage 2 High Resistance

B0013:0E Driver Frontal Deployment Loop Stage 2 Low Resistance

Need more information about the B0013 2016 GMC Sierra code?

Need more information on how to fix the B0013 2016 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0013 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0013 2016 GMC Sierra Code

1. What are common symptoms of OBDII code B0013 in a 2016 GMC Sierra?

- Common symptoms include the airbag warning light being illuminated on the dashboard and potential non-deployment of the driver's steering wheel airbag.

2. What does OBDII code B0013 indicate in a 2016 GMC Sierra?

- OBDII code B0013 in a 2016 GMC Sierra refers to a Driver Steering Wheel Air Bag Deployment Loop Stage 2 malfunction.

3. What are possible causes of OBDII code B0013 in a 2016 GMC Sierra?

- Possible causes of OBDII code B0013 in a 2016 GMC Sierra include a faulty driver steering wheel airbag deployment loop, wiring issues, or a defective airbag module.

4. How can I diagnose the cause of OBDII code B0013 in my 2016 GMC Sierra?

- Diagnosing OBDII code B0013 typically requires using a diagnostic scan tool to retrieve the specific fault code and then inspecting the driver steering wheel airbag system for any visible damage or wiring issues.

5. Can I still drive my 2016 GMC Sierra with OBDII code B0013 present?

- It is not recommended to drive your 2016 GMC Sierra with OBDII code B0013 present, as it indicates a potential issue with the driver's steering wheel airbag deployment system, compromising your safety in the event of a collision.

6. How should I repair OBDII code B0013 in my 2016 GMC Sierra?

- Repairing OBDII code B0013 may involve replacing the driver steering wheel airbag deployment loop, repairing any damaged wiring, or addressing issues with the airbag module. It is recommended to consult a qualified mechanic for proper diagnosis and repair.

7. Can resetting the OBDII system clear code B0013 in a 2016 GMC Sierra?

- Resetting the OBDII system may temporarily clear the code, but if the underlying issue causing code B0013 is not addressed, the code is likely to reappear. It is important to diagnose and fix the root cause of the problem.

8. Is it safe to reset the OBDII system to clear code B0013 in a 2016 GMC Sierra?

- While resetting the OBDII system is safe, it is crucial to address the root cause of code B0013 before clearing it, as this code pertains to the driver's steering wheel airbag deployment system's functionality and safety.

9. Are there any recalls related to OBDII code B0013 in a 2016 GMC Sierra?

- It is recommended to check with GMC or the National Highway Traffic Safety Administration (NHTSA) for any recalls related to OBDII code B0013 in a 2016 GMC Sierra to ensure proper resolution of the issue.

10. Can a DIY enthusiast fix OBDII code B0013 in a 2016 GMC Sierra?

- While some DIY enthusiasts may have the skills to address simpler issues related to OBDII code B0013, given that it involves the driver's steering wheel airbag deployment system, it is advisable to seek professional assistance to ensure proper diagnosis and repair.

Discuss the causes and fixes for B0013 2016 GMC Sierra OBDII Code

Submit a New Comment

Code B0013 2016 GMC Sierra comments

No comments found for this page.