B0013:0E Code - Driver Steering Wheel Air Bag Deployment Loop Stage 2 Low Resistance
Quick Answer
The B0013:0E diagnostic trouble code indicates that there is a low resistance in the driver steering wheel airbag deployment loop stage 2. Common causes include Faulty wiring or connectors in the airbag deployment loop, Damage to the steering wheel airbag module, Malfunctioning airbag deployment sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0013:0E indicates Driver Steering Wheel Air Bag Deployment Loop Stage 2 Low Resistance.
- Common causes
- Common causes include Faulty wiring or connectors in the airbag deployment loop, Damage to the steering wheel airbag module, Malfunctioning airbag deployment sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0013:0E Description
The B0013:0E diagnostic trouble code indicates that there is a low resistance in the driver steering wheel airbag deployment loop stage 2. This loop is a crucial part of the vehicle's safety system, specifically designed to deploy the airbag in the steering wheel in case of a collision. When this code is triggered, it means that there is an issue with the circuit that controls the deployment of the airbag. This could potentially lead to the airbag not deploying properly or at all in the event of an accident, putting the driver at risk of serious injury.
Common Causes of B0013:0E
- Faulty wiring or connectors in the airbag deployment loop.
- Damage to the steering wheel airbag module.
- Malfunctioning airbag deployment sensor.
- Corrosion or debris in the airbag circuit.
- Vehicle collision or impact that damaged the airbag system.
Symptoms of B0013:0E
- Airbag warning light illuminated on the dashboard.
- Inability to turn off the airbag warning light even after resetting the system.
- Loss of power to the airbag system.
- Intermittent or non-deployment of the airbag during a collision.
- Issues with the horn or cruise control functions on the steering wheel.
How to Fix B0013:0E
- Diagnose the issue using a diagnostic scan tool to confirm the B0013:0E code and pinpoint the exact cause of the low resistance.
- Inspect the wiring and connectors in the airbag deployment loop for any damage or corrosion. Repair or replace any faulty components.
- Check the airbag module and deployment sensor for proper functioning. Replace any parts that are malfunctioning.
- Clear the diagnostic trouble code and reset the airbag system to ensure that the issue has been resolved.
- Test the airbag system to confirm that the airbag deploys correctly in a controlled environment.
Cost to Fix B0013:0E
The cost of repairing a B0013:0E code can vary depending on the extent of the damage and the specific components that need to be replaced. On average, the repair for this issue can range from $200 to $500, including parts and labor. Keep in mind that labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate. Additionally, if the airbag module or deployment sensor needs to be replaced, the cost can increase significantly.
Tech Notes for B0013:0E
B0013:02 Driver Frontal Deployment Loop Stage 2 Short to Ground
B0013:04 Driver Frontal Deployment Loop Stage 2 Open Circuit
B0013:0D Driver Frontal Deployment Loop Stage 2 High Resistance
B0013:0E Driver Frontal Deployment Loop Stage 2 Low Resistance
Need more information about the B0013:0E code?
Need more information on how to fix the B0013:0E code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0013:0E code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0013:0E Code
1. What are common symptoms of OBDII code B0013:0E?
- The common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the driver steering wheel airbag deployment system.
2. What does OBDII code B0013:0E indicate?
- This code, Driver Steering Wheel Air Bag Deployment Loop Stage 2 Low Resistance, indicates a detected low resistance in the deployment loop of the driver's steering wheel airbag.
3. What are possible causes of OBDII code B0013:0E?
- Possible causes include damaged wiring in the airbag system, a faulty clock spring in the steering column, loose connections, or a malfunctioning airbag module.
4. How can I diagnose OBDII code B0013:0E?
- Diagnosis involves using a professional OBDII scanner to read and interpret the code, along with inspecting the wiring, connectors, and components in the driver steering wheel airbag system.
5. Is it safe to drive with OBDII code B0013:0E present?
- It is not recommended to drive with this code active, as it indicates a potential issue with the driver's airbag system, which is crucial for occupant safety in the event of a collision.
6. What are the repair options for OBDII code B0013:0E?
- Repair options include fixing or replacing damaged wiring, repairing or replacing the clock spring, securing loose connections, or replacing the airbag module as needed.
7. Can I reset OBDII code B0013:0E without fixing the underlying issue?
- While you can clear the code temporarily, it will likely reappear if the root cause of the low resistance in the driver steering wheel airbag system is not addressed.
8. Are there any DIY tips for repairing OBDII code B0013:0E?
- DIY tips include carefully inspecting visible wiring and connectors for damage, ensuring proper electrical connections, and consulting the vehicle's service manual for specific repair procedures.
9. Do I need a professional mechanic to fix OBDII code B0013:0E?
- Due to the safety implications of airbag systems, it is recommended to have a qualified mechanic diagnose and repair OBDII code B0013:0E to ensure proper functioning of the airbag system.
10. How can I prevent OBDII code B0013:0E from recurring?
- Regularly inspecting and maintaining the airbag system components, addressing any wiring issues promptly, and following the manufacturer's recommended maintenance schedule can help prevent this code from reoccurring.
Discuss the causes and fixes for B0013:0E OBDII Code
Code B0013:0E comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.