B0013:0D Code - Driver Steering Wheel Air Bag Deployment Loop Stage 2 High Resistance
Quick Answer
The diagnostic trouble code B0013:0D indicates a high resistance in the driver steering wheel airbag deployment loop stage 2. Common causes include Loose or corroded connections in the airbag deployment circuit, Damage to the wiring harness that connects the airbag system components, Faulty clock spring in the steering wheel assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0013:0D indicates Driver Steering Wheel Air Bag Deployment Loop Stage 2 High Resistance.
- Common causes
- Common causes include Loose or corroded connections in the airbag deployment circuit, Damage to the wiring harness that connects the airbag system components, Faulty clock spring in the steering wheel assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0013:0D Description
The diagnostic trouble code B0013:0D indicates a high resistance in the driver steering wheel airbag deployment loop stage 2. This means that there is a potential issue with the circuit that controls the deployment of the airbag in the steering wheel in the event of a collision. The airbag system is a crucial safety feature in modern vehicles, designed to protect the driver in the event of a crash by deploying rapidly to cushion the impact and reduce the risk of serious injury.
Common Causes of B0013:0D
- Loose or corroded connections in the airbag deployment circuit
- Damage to the wiring harness that connects the airbag system components
- Faulty clock spring in the steering wheel assembly
- Issues with the airbag control module
- Impact or collision that may have damaged the airbag deployment system
Symptoms of B0013:0D
- Illumination of the airbag warning light on the dashboard
- Inability to turn off the airbag warning light even after resetting it
- Loss of functionality in the steering wheel controls (e.g., horn, cruise control)
- Erratic or non-functional operation of the airbag system
How to Fix B0013:0D
- Begin by conducting a thorough inspection of the airbag deployment circuit to identify any loose or corroded connections. Repair or replace any damaged components as needed.
- Check the wiring harness for any signs of damage or wear. Repair or replace any damaged sections of the wiring harness.
- Inspect the clock spring in the steering wheel assembly for any signs of wear or damage. Replace the clock spring if necessary.
- Scan the airbag control module for any fault codes and conduct a diagnostic test to identify any issues with the module. Replace the control module if it is found to be faulty.
- Once the repairs have been completed, reset the airbag system and test the functionality of the airbag deployment circuit to ensure that the issue has been resolved.
Cost to Fix B0013:0D
The cost of repairing a high resistance in the driver steering wheel airbag deployment loop stage 2 can vary depending on the extent of the damage and the specific components that need to be repaired or replaced. In general, the cost of parts for this repair can range from $200 to $800, while labor costs can range from $150 to $300. Overall, the total cost of addressing this issue can be expected to fall between $350 and $1100. However, it is important to note that these are rough estimates, and actual costs may vary depending on the location, make and model of the vehicle, and the labor rates at the auto repair shop. It is recommended to get a detailed quote from a trusted auto repair shop to determine the precise cost of repairing this issue.
Tech Notes for B0013:0D
B0013:02 Driver Frontal Deployment Loop Stage 2 Short to Ground
B0013:04 Driver Frontal Deployment Loop Stage 2 Open Circuit
B0013:0D Driver Frontal Deployment Loop Stage 2 High Resistance
B0013:0E Driver Frontal Deployment Loop Stage 2 Low Resistance
Need more information about the B0013:0D code?
Need more information on how to fix the B0013:0D code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0013:0D code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0013:0D Code
1. What are common symptoms of OBDII code B0013:0D (Driver Steering Wheel Air Bag Deployment Loop Stage 2 High Resistance)?
- Common symptoms may include the airbag warning light illuminating on the dashboard, a non-functional horn, or failure of the airbag system to deploy in an accident.
2. What can cause the OBDII code B0013:0D to trigger?
- The code B0013:0D is typically triggered by high resistance in the driver steering wheel airbag deployment loop, which could be caused by a faulty airbag clock spring, loose connections, or damaged wiring.
3. How serious is the OBDII code B0013:0D (Driver Steering Wheel Air Bag Deployment Loop Stage 2 High Resistance)?
- This code indicates a potential issue with the driver's airbag system, which could compromise safety in the event of a collision. It is essential to address this issue promptly.
4. Can I continue driving with the OBDII code B0013:0D present?
- It is not recommended to continue driving with this code present, as it signifies a problem with the driver's airbag deployment system. It is best to address the issue as soon as possible.
5. How can I diagnose and repair OBDII code B0013:0D?
- Diagnosis typically involves inspecting the airbag system components, checking for loose connections, testing the clock spring, and verifying the wiring integrity. Repair may involve replacing faulty components and clearing the code.
6. Is it safe to reset the OBDII code B0013:0D without fixing the underlying issue?
- It is not safe to simply reset the code without addressing the root cause, as it could lead to the airbag system failing to deploy properly in an accident. Always diagnose and repair the issue before clearing the code.
7. Can a DIY enthusiast fix the OBDII code B0013:0D issue?
- While some DIY enthusiasts with automotive repair experience may be able to diagnose and fix this issue, it is crucial to have the proper tools, knowledge, and caution when dealing with airbag systems due to safety concerns.
8. How much does it typically cost to repair OBDII code B0013:0D?
- The cost of repairing this code can vary depending on the underlying cause and the labor rates of the repair shop. It may involve replacing components like the clock spring, which can range from $200 to $500 or more.
9. How long does it take to repair OBDII code B0013:0D?
- The repair time for this code can vary based on the extent of the issue and the availability of parts. It may take a few hours to a full day for a skilled technician to diagnose and repair the problem.
10. Is it necessary to visit a dealership for OBDII code B0013:0D repair?
- While a dealership may have specialized knowledge and tools for this repair, independent automotive repair shops with experienced technicians can also effectively diagnose and repair the issue.
Discuss the causes and fixes for B0013:0D OBDII Code
Code B0013:0D comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.