P0352 - Ignition Coil 2 Primary/Secondary Circuit Malfunction

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3  What does this mean?

P0352 Possible Causes

  • Faulty Ignition Coil 2
  • Ignition Coil 2 harness is open or shorted
  • Ignition Coil 2 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

First diagnose P0352 code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.

Cost of diagnosing the P0352 code

    Labor: 1.0

    The cost of diagnosing the P0352 code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

When is the P0352 code detected?

Each ignition circuit is continuously monitored by the Engine Control Module (ECM). The test fails when the ECM does not receive a valid pulse signal from the ignition coil.

P0352 Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Lack/Loss of Power
  • Engine may be harder to start
  • Engine hesitation
  • Rough engine idle

P0352 Meaning

The ignition system on the vehicle uses individual ignition coils for each cylinder. The Engine Control Module (ECM) controls each ignition coil operation. The ECM sends a ON/OFF signal to energize the ignition coil to create a spark at the spark plug when a spark is required at the cylinder.
OBDII Code P0352 - Ignition Coil 2 Primary/Secondary Circuit Malfunction - Engine-Codes.com

P0352 More Information

Need more information on how to fix the P0352 code?
Get Access to Factory Service Manuals

P0352 Information for specific makes

Related Information