Engine-Codes - Toyota - P2432 Toyota

P2432 Toyota Code - Secondary Air Injection System Air Flow/Pressure Sensor Circuit Low Bank 1

- Code Popularity: 24,118 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents
ChatAC AutoCodes.com AI Chat

What are the Possible Causes of the DTC P2432 Toyota?

NOTE: The causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes.
  • Faulty Pressure Sensor
  • Pressure Sensor harness is open or shorted
  • Pressure Sensor circuit poor electrical connection
⚠ Does your Toyota have Safety Recalls? → Check here

How to Fix the DTC P2432 Toyota?

Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Search for P2432 Toyota Questions and Answers: Search here →

What is the Cost to Diagnose the Code?

Labor: 1.0

The cost to diagnose the P2432 Toyota code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.

When is the Code Detected?

The Engine Control Module (ECM) monitors the pressure in the secondary air passage using the pressure sensor located on the air switching valve in the secondary air injection system.
If there is a defect in the sensor or the sensor circuit, the voltage level deviates from the normal operating range, the ECM interprets this deviation as a malfunction in the pressure sensor or circuit and sets a Detected Trouble Code (DTC).

What are Code Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

What Does the P2432 Toyota Code Mean?

The Secondary Air injection (AIR) system consists of an air pump, the Air Switching Valve (ASV), a pressure sensor, the Air Injection Control Driver (AID) and the Engine Control Module (ECM). For a short time after cold engine starts, the AIR system pumps secondary air to the exhaust port of the cylinder head to purify the exhaust emissions. The secondary air is supplied by the air pump and is pumped to the exhaust port through the ASV.
The AID drives the ASV and the air pump according to command signals transmitted by the ECM. The pressure sensor detects the pressure in the secondary air passage when the AIR system is ON and OFF, and transmits pressure signal to the ECM.
The AID is not only equipped to drive the pump and valve, but also with a diagnosis function to detect malfunctions in the AIR system circuit.
HINT: As a large current is required to drive the air pump and ASV, an AID has been added to the previous system.

P2432 Toyota Code - Secondary Air Injection System Air Flow/Pressure Sensor Circuit Low Bank 1

Need more Information on the Code?

Need more information on how to fix the P2432 Toyota code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2432 Toyota code diagnosed by a professional: Find a repair shop in your area