Engine-Codes - Toyota - P2118 2006 Toyota Prius

P2118 2006 Toyota Prius Code - Throttle Actuator Control Motor Current Range/Performance

- Code Popularity: 4,575 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 2/3
Table of contents
ChatAC AutoCodes.com AI Chat

What are the Possible Causes of the DTC P2118 2006 Toyota Prius?

NOTE: The causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes.
  • ETCS fuse
  • Faulty Throttle Actuator Control Actuator
  • Electronic Throttle Control System (ETCS) harness is open or shorted
  • Electronic Throttle Control System (ETCS) circuit poor electrical connection
⚠ Does your Toyota have Safety Recalls? → Check here

How to Fix the DTC P2118 2006 Toyota Prius?

Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Search for P2118 2006 Toyota Prius Questions and Answers: Search here →

What is the Cost to Diagnose the Code?

Labor: 1.0

The cost to diagnose the P2118 2006 Toyota Prius code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.

When is the Code Detected?

The Engine Control Module (ECM) monitors the battery supply voltage applied to the electronic throttle actuator. When the power supply voltage drops below the threshold, the ECM concludes that the power supply circuit has an open circuit. A DTC is set and the MIL is turned on.

What are Code Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

What Does the P2118 2006 Toyota Prius Code Mean?

The Electronic Throttle Control System (ETCS) has a dedicated power supply circuit. The voltage (+BM) is monitored and when the voltage is low (less than 4 V), the Engine Control Module (ECM) concludes that the ETCS has a fault and current to the throttle actuator is cut. When the voltage becomes unstable, the ETCS itself becomes unstable. For this reason, when the voltage is low, the current to the actuator is cut. If repairs are made and the system has returned to normal, turn the ignition switch OFF. The ECM then allows current to flow to the actuator and actuator can be restarted.

P2118 2006 Toyota Prius Code - Throttle Actuator Control Motor Current Range/Performance

Need more Information on the Code?

Need more information on how to fix the P2118 2006 Toyota Prius code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2118 2006 Toyota Prius code diagnosed by a professional: Find a repair shop in your area