Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
The cost to diagnose the P20CD code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.
The exhaust fuel addition injector assembly is mounted on the outlet of the turbocharger sub-assembly, and low-pressure fuel is supplied to the exhaust fuel addition injector assembly by the feed pump in the supply pump assembly. The exhaust fuel addition injector assembly adds fuel by a control signal from the Engine Control Module (ECM). This injector is used for two different controls: Particulate Matter (PM) forced regeneration and PM reduction. The ECM supplies power and ground to the high and low control circuits of the exhaust aftertreatment fuel injector. When the ECM detects a fault on either of the exhaust aftertreatment fuel injector circuits it sets a Diagnostic Trouble Code (DTC).
Need more information on how to fix the P20CD code? Get Access to Factory Service Manuals
Get the P20CD code diagnosed by a professional: Find a repair shop in your area