Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
Search for P0499 Questions and Answers: Search here →
What is the Cost to Diagnose the Code?
Labor: 1.0
The cost to diagnose the P0499 code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.
What are Code Possible Symptoms?
Engine Light ON (or Service Engine Soon Warning Light)
What Does the P0499 Code Mean?
The Evaporative Emission (EVAP) Vent Solenoid Valve is located on the EVAP canister and is used to seal the canister vent. The Evaporative Emission Vent Solenoid Valve responds to signals from the Engine Control Module (ECM). Battery voltage is supplied to the EVAP vent solenoid valve through a fuse. The ECM grounds the EVAP Vent Solenoid Valve control circuit through an internal switch called a driver. A plunger will then move to seal the canister vent. The ability to seal the vent is necessary for the on board diagnosis of other evaporative emission control system components. The ECM monitors the status of the driver. A scan tool will display the commanded state of the EVAP Vent Solenoid Valve as Not Venting (On) or Venting (Off). The Diagnostic Trouble Code (DTC) will be set when the ECM detects the EVAP vent solenoid valve control circuit is shorted to voltage within 0.25 s.
P0499 Code - Evaporative Emission System Vent Valve Control Circuit High