The P0304 code means that cylinder #4 is misfiring or is randomly misfiring. Start by checking for intake leaks and if no leaks are found the next step is to replace the spark plugs on cylinder #4. If the problem persists more tests need to be done to diagnose the problem, see "Possible Causes".
Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
The cost to diagnose the P0304 Acura code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.
The crankshaft vibrates slightly when each cylinder fires. If a misfire occurs, the crankshaft rotation speed changes rapidly. The Powertrain Control Module (PCM) monitors the crankshaft rotation speed based on the output pulses from the Crankshaft Position (CKP) Sensor. By monitoring changes in the crankshaft rotation speed, the PCM counts the number of misfires and determines which cylinder is misfiring. If a misfire is detected, a Diagnostic Trouble Code (DTC) is stored.
There are two types of misfire detection: Type 1: When the number of misfires per 200 engine revolutions reaches the level that can damage the three-way catalyst (TWC), a DTC is stored and the MIL blinks. Type 2: When the number of misfires per 1,000 engine revolutions reaches the level that affects exhaust emissions but is not severe enough to immediately damage the catalyst, a DTC is stored, and the MIL comes on.
Need more information on how to fix the P0304 Acura code? Get Access to Factory Service Manuals
Get the P0304 Acura code diagnosed by a professional: Find a repair shop in your area