Engine-Codes - Generic - P0019

P0019 Code - Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor 'B'

- Code Popularity: 36,871 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents
ChatAC AutoCodes.com AI Chat

What are the Possible Causes of the DTC P0019?

NOTE: The causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes.
  • Mechanical timing fault
  • Blocked oil passage
  • Low oil level
  • Faulty Exhaust ('B') Camshaft Position (CMP) Sensor
  • Faulty Crankshaft Position (CKP) Sensor
⚠ Does your Car have Safety Recalls? → Check here

How to Fix the DTC P0019?

Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Search for P0019 Questions and Answers: Search here →

What is the Cost to Diagnose the Code?

Labor: 1.0

The cost to diagnose the P0019 code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.

What are Code Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Engine hard to start
  • Engine stall while driving

What Does the P0019 Code Mean?

The Crankshaft Position (CKP) sensor is a permanent magnet generator, known as a variable reluctance sensor. The magnetic field of the sensor is altered by a crankshaft mounted reluctor wheel that has seven machined slots, 6 of which are equally spaced 60 degrees apart. The seventh slot is spaced 10 degrees after one of the 60 degree slots. The CKP sensor produces seven pulses for each revolution of the crankshaft. The pulse from the 10 degree slot is known as the sync pulse. The sync pulse is used to synchronize the coil firing sequence with the crankshaft position. The CKP sensor is connected to the Powertrain Control Module (PCM) by a signal circuit and a low reference circuit.
The Camshaft Position (CMP) sensor is triggered by a notched reluctor wheel built into the exhaust camshaft sprocket. The CMP sensor provides 6 signal pulses every camshaft revolution. Each notch, or feature of the reluctor wheel is of a different size for individual cylinder identification. This means the CMP and crankshaft position (CKP) signals are pulse width encoded to enable the PCM to constantly monitor their relationship. This relationship is used to determine camshaft actuator position and control its phasing at the correct value. The PCM also uses this signal to identify the compression stroke of each cylinder, and for sequential fuel injection. The CMP sensor is connected to the PCM by a 12-volt, low reference, and signal circuit.
P0019 Code - Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor 'B'

Need more Information on the Code?

Need more information on how to fix the P0019 code? Get Access to Factory Service Manuals

Code P0019 Information for Specific Makes

  • P0019 Audi Crankshaft Position Camshaft Position Correlation Bank 2 Sensor 'B'
  • P0019 Buick Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor 'B'
  • P0019 Cadillac Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor 'B'
  • P0019 Chevrolet Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor 'B'
  • P0019 Ford Crankshaft Position Camshaft Position Correlation Bank 2 Sensor 'B'  📷
  • P0019 GMC Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor 'B'
  • P0019 Hummer Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor 'B'
  • P0019 KIA Crankshaft/Camshaft Correlation Error Bank 2 Sensor 2
  • P0019 Lexus Crankshaft Position Camshaft Position Correlation Bank 2 Sensor 'B'
  • P0019 Lincoln Crankshaft Position Camshaft Position Correlation Bank 2 Sensor 'B'  📷
  • P0019 Mercury Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor 'B'
  • P0019 Pontiac Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor 'B'
  • P0019 Saturn Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor 'B'
  • P0019 Scion Crankshaft Position Camshaft Position Correlation Bank 2 Sensor 'B'
  • P0019 Subaru Crankshaft And Camshaft Timing 'B' System Failure Bank 2
  • P0019 Suzuki Crankshaft Position - Exhaust Camshaft Position Correlation Bank 2
  • P0019 Toyota Crankshaft Position Camshaft Position Correlation Bank 2 Sensor 'B'
  • P0019 Volkswagen Crankshaft Position Camshaft Position Correlation Bank 2 Sensor 'B'

Need Help with the Code?

Get the P0019 code diagnosed by a professional: Find a repair shop in your area