P0236 - Turbocharger/Supercharger Boost Sensor 'A' Circuit Range/Performance
- Boost pressure sensor circuit poor electrical connection
- Faulty boost pressure sensor
- Faulty Turbo/Super Charger
- Engine over temperature
- Ignition misfire exceeds the calibrated threshold
- Faulty Knock sensor (KS)
The boost pressure sensor responds to pressure changes in the intake manifold. This pressure is created by the turbocharger and changes with accelerator pedal position (APP) and engine speed. The engine control module (ECM) uses this information to assist in diagnosis of the barometric pressure (BARO) sensor and to provide engine overboost protection. The boost pressure sensor has a 5-volt reference circuit, a low reference circuit, and a signal circuit. The engine control module (ECM) supplies 5 volts to the boost pressure sensor on the 5-volt reference 2 circuit, and provides a ground on a low reference circuit. The boost pressure sensor provides a signal to the ECM on a signal circuit relative to the pressure changes. The ECM monitors the boost pressure sensor signal for voltage outside of the normal range. The ECM calculates a predicted value for the boost pressure sensor. The ECM then compares the predicted value to the actual signal.
P0236 DODGE MAP Sensor Too High Too Long
P0236 JEEP MAP Sensor Too High Too Long
P0236 MERCEDES-BENZ Turbocharger/Supercharger Boost Sensor 'A' Circuit Range/Performance
P0236 VOLKSWAGEN Turbo/Super Charger Boost Sensor 'A' Circuit
2000 chevy 3500hd races and spits black smoke then loses all power when you step on accelerator...
My friend has a 1996 6.5 turbo diesel I'm trying to help him fix. While driving it, the engine surge...
What does this mean?...
In second gear when engine is warm, you can press on gas and it is like it stalls after 2000 rpm and...